• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.889-896
• /
• 2020

The vertically inverted U-tube steam generator (UTSG) is widely used in the pressurized water reactor (PWR). The reverse flow behavior generally exists in some U-tubes of a steam generator (SG) under both single- and two-phase natural circulations (NCs). The behavior increases the flow resistance in the primary loop and reduces the heat transfer in the SG. As a consequence, the NC ability as well as the inherent safety of nuclear reactors is faced with severe challenges. The theoretical models for calculating single- and two-phase flow pressure drops in U-tubes are developed and validated in this paper. The two-phase reverse flow characteristics in two types of SGs are investigated base on the theoretical models, and the effects of the U-tube height, bending radius, inlet steam quality and primary side pressure on the behavior are analyzed. The conclusions may provide some promising references for SG optimization to reduce the disadvantageous behavior. It is also of significance to improve the NC ability and ensure the PWR safety during some accidents.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.105-116
• /
• 1996

In this paper, we report the experimental results for the flow pattern and the material transport around a cavity subject to a sinusoidal external flow at the far region to ward the open side of the cavity. A tilting mechanism is used to generate a oscillatory flow inside a shallow rectangular container having a cavity at one side. The surface flow visualization is performed to obtain the unsteady behavior of vortices generated at two edges situated at the entrance of the cavity. It was found that at the period 4.5 sec., the behavior of the vortices is asymmetric, and there exists a steady residual flow in the cavity. The bottom flow patterns are also visualized. There are two regions outside of the cavity where the bottom fluid particles concentrate. The material transport in this flow model is very peculiar; fluid particles in the cavity flows outward through the passage along the walls starting from the edges, and particles in the outer region approach the cavity from the central region.

• 소성∙가공
• /
• 제14권1호
• /
• pp.49-56
• /
• 2005

In the semi-solid die casting process, an important thing is the flow behavior of semi-solid materials. The flow patterns of the semi-solid material can make the defects during die filling. To control the flow patterns is very important and difficult. In this paper, the flow behavior of the semi-solid A356 alloy material during die filing at various die gate shapes has been observed with the grain size controlled material. The effect of the gate shape on the die filling characteristics was investigated. The filling tests in each plunger stroke were experimented, and also simulated on the semi-solid material die casting process by MAGMAsoft. According to the filling tests and computer simulation, the effect of the gate shape on liquid segregation has been investigated.

• Journal of Microbiology and Biotechnology
• /
• 제3권3호
• /
• pp.209-213
• /
• 1993

The flow behavior of the mycelial broth of glucoamylase hyperproducer Asp. niger No. PFST-38 for the production of glucoamylase were studied. The mycelial broth followed Bingham-pseudoplastic flow model described by Herschel-Bulkley equation. The yield stress increased with the increase in mycelial concentration. The dependency of the consistency index and the flow behavior index on the mycelial concentration could be expressed by a linear relationship. The consistency index increased proportionally with the mycelial concentration while the flow behavior index decreased with the increase in mycelial concentration. The flow property of the broth was related to the morphological data obtain in the previous study. The changes in apparent viscosity of the broth could be expressed as a function of the hyphal thickness as shown below.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.273-279
• /
• 2008

The purpose of this study is not only to evaluate thermal performance but also to find the stress behavior of heat transfer tubes under the part load operation in Heat Recovery Steam Generator. Flow analysis was performed to know the behavior of exhaust gas from gas turbine and thermal performance was calculated using distribution of hot exhaust velocity. In addition, tubes temperature during operation were gathered from actual plant to verify the uneven flow distribution under part load operation. Stress analysis was performed using tubes temperature data gathered from actual plant under both part and full load operations to know the stress behavior of tubes.

• International Journal of Concrete Structures and Materials
• /
• 제10권sup3호
• /
• pp.65-74
• /
• 2016

During concrete pumping, the migration and redistribution of particles occur in a pipe and the lubrication layer that forms between the bulk concrete and the pipe wall is the governing factor determining the flow behavior. In order to identify flow behavior of pumping, in this study, the viscoelastic properties related to the microstructural behavior of a flocculated suspension were examined by using dynamic oscillatory measurements. Cement paste is assumed to be a constituent material of the lubrication layer and ten cases of mixing design are employed by changing the proportions of mineral admixtures. The relationship between the yield stress obtained from the steady shear test and the dynamic modulus resulted from the oscillatory shear measurement was derived and the implications of the correlation are discussed. Moreover, based on the investigation of the viscoelastic properties with oscillatory measurements, the initial behavior of pumped concrete was analyzed systematically.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.634-636
• /
• 2023

Surveillance systems play a pivotal role in ensuring the safety and security of various environments, including public spaces, critical infrastructure, and private properties. However, detecting abnormal human behavior in lowlight conditions is a critical yet challenging task due to the inherent limitations of visual data acquisition in such scenarios. This paper introduces a spatiotemporal framework designed to address the unique challenges posed by low-light environments, enhancing the accuracy and efficiency of human abnormality detection in surveillance camera systems. We proposed the pre-processing using lightweight exposure correction, patched frames pose estimation, and optical flow to extract the human behavior flow through t-seconds of frames. After that, we train the estimated-action-flow into autoencoder for abnormal behavior classification to get normal loss as metrics decision for normal/abnormal behavior.

• 신재생에너지
• /
• 제3권4호
• /
• pp.8-15
• /
• 2007

Liquid water in flow channel is an important factor that limits the steady and transient performance of PEM fuel cells. A computational fluid dynamics study based on the volume-of-fluid [VOF] multi-phase model was conducted to understand the two-phase flow behavior of liquid water in cathode gas channels. The liquid water transport in $180^{\circ}{\Delta}$ bends was investigated, where the effects of surface characteristics (hydrophilic and hydrophobic surfaces], channel geometries (rectangular and chamfered corners], and air velocity in channel were discussed. The two-phase flow behavior of liquid water with hydrophilic channel surface and that with hydrophobic surface was found very different; liquid water preferentially flows along the corners of flow channel in hydrophilic channels while it flows in rather spherical shape in hydrophobic channels. The results showed that liquid water transport was generally enhanced when hydrophobic channel with rounded corners was used. However, the surface characteristics and channel geometries became less important when air velocity was increased over 10m/s. This study is believed to provide a useful guideline for design optimization of flow patterns or channel configurations of PEM fuel cells.

• 한국의류학회지
• /
• 제33권9호
• /
• pp.1409-1418
• /
• 2009

This study investigates the relationship among interactivity, telepresence, flow, and future behavior intention in internet shopping. Respondents were female consumers age 20 to 30. These consumers are regarded to have experience in internet shopping. 500 samples were used in this research. For data analysis, descriptive statistics, factor analysis, ANOVA, and multiple regression analysis were used for this study. As the result, interactivity, telepresence, and flow affect future behavior intention. Flow is the most influential variable affecting the future behavior intention. It implies that hedonic shopping experience (aroused by flow) can increase the future behavior intention of consumers. Consumers can operate and change the product image with convenience by encouraging interactivity between the internet fashion shopping mall and consumers. Through the technology, the experience 'flow' of consumers can provide a sense of telepresence as if they were shopping in a real store. Consumers may feel unconscious of the passage of time and feel fun, free, and original. Therefore, the internet shopping mall should pay attention to what customers demand and reflect it through e-mail, real time chatting, and text messages. In addition, rich product information such as detailed images should be supplied to help customers visualize looks.

• 대한토목학회논문집
• /
• 제39권2호
• /
• pp.263-272
• /
• 2019

본 연구는 실제 고속도로 인접지역에서 발생한 토석류를 대상으로 고속도로에서의 토석류 거동을 FLO-2D 모형을 적용하여 재현함으로써, 고속도로에서의 토석류 영향 해석에 대한 FLO-2D 모형의 활용성을 검증하고자 하였다. 대상유역으로는 2005년 8월 집중호우로 토석류가 발생하여 24시간 동안 교통이 차단된 대전-진주간 고속도로의 덕유산 휴게소구간으로 선정하였다. 발생 토석류에 대한 현장조사 및 토성 시험분석 자료를 활용하여 GIS를 이용한 지형분석, HEC-HMS를 이용한 수문분석, 그리고 토석량을 산정하였다. 그리고 나서 FLO-2D 모형의 매개변수 민감도 분석을 통한 최적 매개변수 조합을 선정한 후, FLO-2D 모형을 적용한 토석류 거동해석을 수행하였다. 모형의 예측치와 실측자료와의 비교 분석을 통하여 고속도로에서 토석류 거동해석을 위한 FLO-2D 활용 가능성을 보여주었다.