DOI QR코드

DOI QR Code

The Effect of the Gate Shape on the Microstructure of the Grain Size Controlled Material

게이트 형상이 결정립 제어 소재의 미세조직에 미치는 영향

  • 정용식 (부산대학교 정밀기계공학과 대학원) ;
  • 서판기 (부산대학교 정밀기계공학과 대학원) ;
  • 강충길 (부산대학교 정밀기계공학부)
  • Published : 2005.02.01

Abstract

In the semi-solid die casting process, an important thing is the flow behavior of semi-solid materials. The flow patterns of the semi-solid material can make the defects during die filling. To control the flow patterns is very important and difficult. In this paper, the flow behavior of the semi-solid A356 alloy material during die filing at various die gate shapes has been observed with the grain size controlled material. The effect of the gate shape on the die filling characteristics was investigated. The filling tests in each plunger stroke were experimented, and also simulated on the semi-solid material die casting process by MAGMAsoft. According to the filling tests and computer simulation, the effect of the gate shape on liquid segregation has been investigated.

Keywords

References

  1. M.C. Flemings, 1991, Behavior of metal alloys in the semisolid state, Metall. Trans. A, Vol. 22A, pp. 957-980
  2. A. C. Street, 1986, The Diecasting Book, 2nd edition, Portcullis Press, Surry, England, pp. 336
  3. J. C. Lee, H. K. Seok, H. I. Lee, 2003, Effect of the Gate Geometry and the Injection Speed on the Flow Behaviors of a Semi-Solid A356 AI Alloy, Metals and Materials Inter., Vol. 9, pp. 351-357 https://doi.org/10.1007/BF03027187
  4. 강충길, 2002, 금속레오로지 소재성형의 연구동향 및 대량생산을 위한 해결방안, 한국소성가공학회지, 제 11 권, pp. 123-131
  5. M. Itamura, N. Yamamoto, K. Murakami, M. Adachi, M. Kikuchi, Y. Tanaka, E. Kobayashi, 1999, Application of flow simulation to die casting die design, Proc. of Modeling of Casting and Solidification Processes IV, pp. 185-193
  6. C. G. Kang, H. K. Jung, 2001, Semisolid forming process-numerical simulation and experimental study, Metallurgical. and Materials. Trans. B, Vol. 32B, pp. 363-371
  7. 강충길, 임미동, 1997, 알루미늄합금의 반용융단조 및 주조공정에 관한 수치해석, 한국소성가공학회지, 제 6 권, pp. 239-249
  8. 정홍규, 강충길, 1999, 반용융 알루미늄 합금의 재가열 및 Thixoforging 부품의 기계적 성질, 한국소성가공학회지, 제 8 권, pp. 437-448
  9. MAGMAsoft Version 4.1 MAGMAthixo Module, Simulation of Thixocasting Manual