• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.662-669
• /
• 2015

There has been an increased interest in the mitigation of wax deposition because wax, which usually accumulates in subsea oil-production systems, interrupts stable oil production and significantly increases the cost. To guarantee a required oil flow by mitigating wax deposition, we need to obtain a reliable estimation of the wax deposition. In this research, we perform simulations to understand the major mechanisms that lead to wax deposition, namely molecular diffusion, shear stripping reduction, and aging. While the model variables (shear reduction multiplier, wax porosity, wax thermal conductivity, and molecular diffusion multiplier) can be measured experimentally, they have high uncertainty. We perform an analysis of these variables and the amount of water and gas in the multiphase flow to determine these effects on the behavior of wax deposition. Based on the results obtained during this study for a higher wax porosity and molecular diffusion multiplier, we were able to confirm the presence of thicker wax deposits. As the shear reduction multiplier decreased, the thickness of the wax deposits increased. As the amount of water increased, there was also an increase in the amount of wax deposits until 40% water cut and decreased. As the amount of gas increased, the amount of wax deposits increased because of the loss of the light hydrocarbon component in the liquid phase. The results of this study can be utilized to estimate the wax deposition behavior by comparing the experiment (or field) and simulation data.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.635-640
• /
• 2004

The present paper provides the design specifications and working principle of flow controlling vortex valve which will be adopted in a Korean next generation reactor (APR1400). The vortex valve is installed inside the pressurized safety injection tank of APR1400, and it passively controls the water discharge flowrate from the tank. In the present study, the performance of the vortex valve have been evaluated throughout the repeated experiments in the full-scale test facility called VAPER(VAlve Performance Evaluation Rig). Based on the experimental results, it is confirmed that the currently developed vortex valve satisfies the major performance requirements of APR1400 plant design in view of the peak discharge flowrate, pressure loss coefficient, and total discharge duration time. To achieve the highest quality of the experimental results, a quality assurance program for vortex valve tests has been strictly applied.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.732-739
• /
• 2009

Flow phantom with stenosis was manufactured using an auto-injector to obtain angiostenotic flow information and quality assurance (QA) for ultrasound diagnostic instrumentation. Effectiveness of manufactured flow phantom with stenosis was investigated with power Doppler that was known to have diagnostic efficiency for angiostenosis. The flow phantom with stenosis was manufactured to 70% stenosis with 8 mm and 2.4 mm silicon tube, and silicone tube was covered with gelatin that has acoustic characteristics similar to soft tissue. When the linear transducer was used for measurement, the estimated diameter of normal vessel was measured lower than that of normal value, and the estimated diameter of stenosed vessel was measured higher than that of normal value. The measured parameters were not affected except for the radical conditions such as gain of 60%, PRF of 3000 Hz, use of maximal filter or angle. In addition, when the convex transducer was used for measurement, measurement parameters were affected by gain, PRF, filter, and angle. Therefore it is expected that flow phantom with stenosis manufactured with an auto-injector will be utilized effectively for QA of angiostenotic diagnosis.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.1
• /
• pp.107-121
• /
• 1996

This study was carried out to develop the computer-assisted Hazard Analysis and Critical Control Point (HACCP) program for a systematic approach to the identification, assessment and control of hazards for foodservice manager to assure the microbiological quality of food in hospital foodservice operations. Sanitation practices were surveyed and analyzed in the dietetic department of 4 hospitals. Among them, one 762-bed general hospital was selected as standard model to develop computer-assisted HACCP program. All data base files and processing programs were created by using Foxpro package for easy access of HACCP concept. HACCP program was developed based on the methods suggested by NACMCF, IAMFES and Bryan. This program consisted of two parts: the pre-stage for HACCP study and the implementation stage of the HACCP system. 1. Pre-stage for HACCP study includes the selection of menu item, the development of the HACCP recipe, the construction of a product flow diagram, and printing the HACCP recipe and a product flow diagram. A menu item for HACCP study can be selected from the menu item lists classified by cooking methods. HACCP recipe includes ingredients, their amount and cooking procedure. A flow diagram is constructed based on the HACCP recipe. The HACCP recipe and a product flow diagram are printed out. 2. Implementation of HACCP study includes the identification of microbiological hazards, the determination of critical control points, the establishment of control methods of each hazard, and the complementation of data base file. Potentially hazardous ingredients are determined and microbiological hazards are identified in each phase of the product flow. Critical control points (CCPs) are identified by applying CCP decision trees for ingredients and each process stage. After hazards and CCPs are identified, criteria, monitoring system, corrective action plan, record-keeping system and verification methods are established. When the HACCP study is complemented, HACCP study result forms are printed out. HACCP data base file can be either added, corrected or deleted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.410-416
• /
• 2017

The silver generation in our aging society will rapidly emergeas a new consumer group and the service industry used by silver customers will develop going forward. The beauty service sector is one of the most needed ones for the qualitative improvement of life for the silver generation. In this research, ananalysis was conducted on 244 persons of the silver generation living in Seoul, in order to examine the factors affecting the quality of the beauty service for the silver generation and their relationships with customer loyalty. For the statistical treatment of the empirical analysis, the SPSS 23.0 and AMOS 23.0 statistical programs were used. The results of the analysis showed that the service quality perceived by the silver customers who used the beauty service had significant effects on trust and flow, which are the relationship qualities, and that trust and flow had positive effects on customer loyalty. Also, it was found that, in the relationship between service quality and customer loyalty, trust had mediating effects on reliability, responsiveness, empathy, and assurance, and that flow had mediating effects on reliability, responsiveness, empathy, assurance, and tangibility. The results of this research are significant in that they present the basic data enabling the beauty industry to play an important role for the silver generation, under the present circumstances in which the beauty service industry has minimal educational programs exclusively available for the silver generation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.310-310
• /
• 2018

Generally, precipitation measurement were conducted with various authrities. Among these, the MOLIT conduct the hydrological survey for the water resource management such as flood and low-flow forecasting, drought countermeasure, streamflow management. There is totally 424 observatory were existed and each precipitation measurement were obtained and quality assuranced with 10-min interval. It could be arranged or estimated with nearby observatory and radar reflectivity when the total amount of precipitation are existed. The objective of the study is therefore to suggest the method to estimate missing data with rain radar reflectivity. To validate suggested method, 50 observartory were obtained, and the efficiency were analyzed with estimated and observed precipitation. As the result of the study, the suggested method has reliability, and can be used as a method for quality assurance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1243-1250
• /
• 2003

In the present study, hot forging process for a lower arm connector of an automobile was investigated. An FEM code, DEFORM-3D, was used to analyze the process and the process parameters, such as temperature, strain and strain rate, were obtained. The microstructure of the connector was predicted by applying the Sellars and Yada microstructure evolution models to the process parameters. The method of microstructure prediction used in the present study seems to be effective for the quality assurance of a forged automotive product.

• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.2
• /
• pp.45-56
• /
• 1979

This report presents the development of an integrated logistics support system for a large-scale machinery manufacturing organization. The system consists of 3 major production management systems and 5 assisting systems. The major systems are: i) production planning and control system, ii) cost control system, and iii) material management system. The assisting systems are: i) personnel management system. ii) technology transfer system, iii) quality assurance system, iv) marketing assisting system, and v) management information system. In addition, other management systems such as planning system, R.&.D. system can be considered according to the organizational need. Several system flow models are developed and presented for the total logistics support system.

• Proceedings of the Korea Information Assurance Society Conference
• /
• 2004.05a
• /
• pp.207-218
• /
• 2004

IT, the information technology's dramatic growth made entire society's system to rely on it, and took its place as one of the core keyword of 21st centurie's big variety. It is enlarging its role boundaries to most territories such as business or economy, and making another cyber space within cyber space. This report is going to review how we are defending ourselves from external threat within such dramatic flow of changes.

• Architectural research
• /
• v.17 no.2
• /
• pp.75-81
• /
• 2015

Insulation and condensation performance evaluation (I&CPE) is an important energy analysis. While considerable amount of data are already represented in a Building Information Model (BIM), the lack of interoperability between BIM modeling and I&CPE programs prevents the simulation process from being efficient and accurate. This study proposes a prototype of a BIM-based I&CPE simulation program, in order to enhance the interoperability between BIM modeling and I&CPE programs. This study discusses the information flow process, defines the required information and its level of detail, develops standardized libraries, and finally proposes a prototype that consists of a data extraction module, conversion module, and performance module. The assurance of interoperability between systems might greatly benefit architects and energy professionals.