• 제목/요약/키워드: Floor mounting

검색결과 10건 처리시간 0.026초

분할 정위방사선 치료 시스템 개발 연구 (Development of A Fractionated Stereotactic Radiotherapy System)

  • 이동한;지영훈;이동훈;조철구;김미숙;유형준;류성렬
    • 한국의학물리학회지:의학물리
    • /
    • 제13권1호
    • /
    • pp.9-14
    • /
    • 2002
  • 두부 프레임을 지지하는 방식으로 pedestal mounting system과 couch mounting system의 장점을 수용한, 새로운 형태의 분할 정위방사선 치료 시스템을 개발하였다. 두부 고정을 위한 프레임은 두랄루민으로 제작하였고, 카우치에 부착되게 하였다. 프레임 내에서 환자의 두부를 고정하기 위해 치아 고정장치와 3.2 mm 열프라스틱으로 전두부와 후두부에 마스크를 제작할 수 있다. 정위 좌표 구현을 위한 전산화 단층촬영 localizer는 각 병원에서 많이 사용하고 있는 Brown-Roberts-Walls(B.R.W) 시스템을 사용할 수 있게 하여, 개발된 시스템의 신뢰성을 높이고 제작 단가도 낮추고자 하였다. 프레임 mounting system은 pedestal mounting system을 수정, 보완한 형태로 개발하였다. 시스템은 카우치를 지지하는 바닥 면에 고정되어 카우치에 부착된 프레임과 결합할 수 있고, 시스템과 카우치의 잠금 장치를 푼 채 자유롭게 x, y축으로 유동할 수 있다. 프레임 mounting system의 중심축은 상, 하 방향으로 이동 가능한 포인터 형태로 제작하여, 치료기의 구동 정확성을 검증하는 정도 관리에 응용 가능하다. 개발된 시스템의 재현성과 정확도 검증을 위해 아크릴 팬텀과 포인터를 제작하였고, 전산화 단층촬영 영상에서 획득한 팬텀 내 목표점의 정위 좌표를 dial-gauge와 E.C.L 필름으로 검증하였다. 실험의 결과 x축 방향의 재현성 오차는 0.71$\pm$0.19 mm, y축 방향은 0.45$\pm$0.15 mm, z축 방향 재현성 오차는 0.63$\pm$0.18 mm로 나타났고, 최대 1.3 mm 이내의 우수한 재현성을 보였다. 연구 결과로 개발된 분할 정위방사선 치료 시스템은 재현성이 우수하고, 전체 중량이 가벼워 사용하기 쉽게 제작되었다. 특히 수정된 pedestal frame mounting system으로 설계되어 후두부 방사선 조사가 가능한 장점이 있다.

  • PDF

탄성바닥에 지지된 합성방진계의 진동특성 (Vibration Characteristics of a Compound Mounting System on an Elastic Floor)

  • 김찬묵;윤수언
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1993년도 추계학술대회논문집; 반도아카데미, 26 Nov. 1993
    • /
    • pp.151-156
    • /
    • 1993
  • 본 논문에서는 탄성바닥 위에서의 세개의 질량과 두개의 방지재로 구성된 지지계에 의한 진동절연의 이론적 고찰과 실험에 의한 검증을 하였다. 효과 적인 진동절연은 본 논문에서 기본적으로 관심을 가지는 탄성바닥에서의 진 동전달률을 감소시키는 것이며, 단순한 수학적 형태로 표현되는 진동전달률 공식은 영향계수법(Receptance Method)을 이용하여 유도된다.

  • PDF

탄성지지된 가동코일형 능동마운트의 성능 분석 (A Performance Analysis of Active Mount with Moving-Coil type Electromagnetic Actuator Installed on the Elastic Foundation)

  • 정우진;배수룡;전재진
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.227-231
    • /
    • 2014
  • Underwater radiated noise is one of the vital factors in underwater weapon systems like submarine. A passive elastic mount is an effective reduction method for the vibration from a ship-board machinery transmitted to the hull which is radiated as noise outside the hull. A passive elastic mount shows the limitation on the vibration reduction and needs multi stage mounting system including double stage one to meet the required underwater radiated noise criteria. It is necessary for the multi stage mounting system to consider the large displacement in the underwater shock explosion. So it is difficult to apply the multi stage mounting system in submarine because of space limitation. Also recent navy sonar system are trying to have the capability to detect the ship-borne acoustic signals in the low frequency range. An alternative to the passive mount is an active mount with moving-coil type electromagnetic actuator based on a conventional rubber mount in the low frequency range. In the previous paper, 4 active mounts with moving-coil type electromagnetic actuator based on the rubber mount were installed on the hard floor of the facility, which means no consideration on the elastic foundation effect for the control of the active mounts was taken into account. In this study, an experimental performance analysis on the active mount was carried out using 4 active mounts installed on the cylindrical structure to investigate the elastic foundation effect.

  • PDF

Seismic study of buildings with viscoelastic dampers

  • Pong, W.S.;Tsai, C.S.
    • Structural Engineering and Mechanics
    • /
    • 제3권6호
    • /
    • pp.569-581
    • /
    • 1995
  • In this paper, the seismic behavior of a 10-story building equipped with viscoelastic dampers is analyzed. The effects of ambient temperature, the thickness, the total area, and the position of the viscoelastic dampers are studied. Results indicate that the energy-absorbing capacity of viscoelastic damper decreases with increasing the ambient temperature. The thickness and the total area of viscoelastic dampers also affect the seismic mitigation capacity. The thickness cannot be too small, which is not effective in vibration reduction, nor can it be too large, which not only increases the cost but also reduces the seismic resistance. The total area of viscoelastic dampers should be determined properly for optimum damper performance at the most economical design. The mounting position of viscoelastic dampers also influences the structure's seismic performance. Numerical results show that, if properly equipped, the VE dampers can reduce the structural response both floor displacement and story shear force and increase the overall level of damping in structures during earthquakes.

농용 트랙터의 안전캡 내부 소음 감소에 관한 연구(II) -소음 감소 효과- (A Case Study on Inside Noise Reduction of Agricultural Tractor Cab(II) -Noise Reduction-)

  • 유동호;김경욱;최창현
    • Journal of Biosystems Engineering
    • /
    • 제20권2호
    • /
    • pp.127-132
    • /
    • 1995
  • In the first part of this paper, an analysis of the cab noise of a selected agricultural tractor was presented. In this study, using the results of the previous analysis, two passive noise control measures of the sound insulation and absorption were conducted to reduce the noise level inside the cab. These measures of noise control reduced the total noise level by 6.2㏈(A) at the operator position inside the cab. In order to further reduce the cab noise, particularly, of lower frequencies than 630Hz, stiffness and damping of the floor panel should be enforced. It was also suggested that a proper suspension for the cab mounting is necessary to reduce the level of structure-born noises.

  • PDF

RV 차량 시트의 적재물 침입 강도해석 (Strength Analysis of Luggage Intrusion into Recreational Vehicle Seat)

  • 배진우;강성종
    • 한국자동차공학회논문집
    • /
    • 제13권4호
    • /
    • pp.160-166
    • /
    • 2005
  • In recent, recreational vehicles, which efficiently provide wide inner space for various utilities, are highly preferred in automobile market. Though those vehicles enable to load much luggage in space behind the last seat, in case of frontal impact with high velocity the luggage strongly collides into the seat back and the passengers in. the last seat could be severely injured. Therefore, high strength against luggage intrusion is required for the last seat, and it is regulated by law of ECE R17. In this study, for a recreational vehicle under developing, an analysis technique for simulating seat crash in accordance with luggage intrusion test of ECE R17 was investigated. The results exhibited good correlation with the test ones.

IMPROVING THE SPEECH INTELLIGIBILITY IN AN AIR-TRFFIC CONTROL ROOM

  • Pavuza, Franz G.;Beszedics, Geza W.;Pichler, Heinrich
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
    • /
    • pp.912-918
    • /
    • 1994
  • Poor speech intelligibility in an air traffic control room is frequently a result of many, quite different causes and occasionally leads to complaints of the controller personnel. The paper describes a sequence of successful tasks performed in a local control room. The initial measurements included an investigation of the background noise (caused by fans, air condition, computer and radar equipment) and performance checks of the electronic audio and communication equipment with respect to the audio transmission behavior. The spectral composition of the noise as well as the characteristics of the audio communication path between the controllers and the pilots(which showed a loss of spectral information in the audio band due to built-in notch filters for the suppression of control tones) required adaptations of the amplitude behavior of the amplifiers through user adjustable tone controls. The radar console fans, which contributed significantly to the overall noise floor of the room, underwent a substantial reconstruction by replacing the tight mounting with an elastic double suspension, reducing the noise level by 50%. Finally, a possible source of untimely fatigue of the controllers during their working hours has been found in strong spectral components of the noise above the audio band, radiated by numerous video monitors in the control through vibrating components excited by the line frequency of the video signal.

  • PDF

시뮬레이션 기법을 이용한 차량내 전동휠체어 탑승자의 전방 충돌시 안전에 관한 연구 (The Safety Assessment of Wheelchair Occupants in Road Passenger Vehicles with the Frontal Crash: a Computer Simulation)

  • 이영신;이기두;임현균
    • 대한기계학회논문집A
    • /
    • 제29권11호
    • /
    • pp.1518-1526
    • /
    • 2005
  • With increasing need of transportation services for people with disabilities and the aged, wheelchairs are used as their assistive devices to participate in daily and recreational activities and as seats of motor vehicle. However, as wheelchairs are primarily designed fer mobility assistive devices, not for vehicle seats, wheelchair users may experience serious injury when they meet car crashes. To date, neither engineering guidance for a wheelchair mounting system on the vehicle floor nor safety assessment analysis by a car crash has been studied for the domestic users. In this paper, in accordance with the ANSVRESNA WC-19, a fixed vehicle mounted wheelchair occupant restraint system (FWORS), wheelchair integrated restraint system (WIRS), and wheelchair integrated x-bend restraint system (WIXRS) subjected to frontal impact (20 g, 48 U) were analyzed using compute. simulations for domestic users. We present surrogate wheelchair occupant safety by head injury criteria (HIC), motion criteria (MC), and combined injury criteria (CIC).

수소버스 측면충돌 시험방법 연구 (Study on Side Impact Test Procedure of Hydrogen Bus)

  • 김경진;신재호;한경희;인정민;심소정;김시우
    • 자동차안전학회지
    • /
    • 제13권4호
    • /
    • pp.92-98
    • /
    • 2021
  • Recently hydrogen fuel cell buses have been deployed for the public transportations. In order to introduce buses fueled by hydrogen successfully, the research results of hydrogen bus safety should be discussed and investigated significantly. Especially, Korean government drives research in terms of various applications of hydrogen energy to replace the conventional fuel energy resources and to improve the safety evaluation. Thus it is necessary to examine vehicle crashworthiness under side impact loadings. This study was focused on the simulation result evaluation of full bus model and simplified bus model with hydrogen fuel tank module and mounting system located below floor structure due to the significance of bus side impact accidents. The finite element models of hydrogen bus, fuel tank system and side impact moving barrier were set up and simulation results reported model performance and result comparison of two side impact models. Computational results and research discussion showed the conceptual side impact framework to evaluate hydrogen bus crashworthiness.

토사불능잠의 출현기구에 관한 생리해부학적 연구 (Physioanatomical studies on mechanism in the process of becoming non-spinning silkworm(Bombyx mori))

  • 윤종관
    • 한국잠사곤충학회지
    • /
    • 제8권
    • /
    • pp.41-50
    • /
    • 1968
  • 산견능률을 향상시키기 위해서는 불결견잠을 방제하는 일이 급선무라 할 수 있다. 그러므로 누에를 생리해부학적인 면에서 그 출현기구를 분석구명하여 이의 방제책을 한 자료로 삼으려 한 것이며 조사 연구내용을 요약하면 다음과 같다. 1. 견사선에 이상이 없음에도 영견치 않는 누에의 토계부부근의 조직을 검사한 결과 토계관의 기부에 와 있는 신경, 기관 및 근육 등에서 다각체를 발견하였다. 2. 불토사잠중에서 농병에 의하는 것이 차지하는 비율이 상당히 높았다. 3. 5령의 누에에 향식 당일부터 8시간에 걸쳐 농즙을 접종한 결과 결견잠수에 있어서 접종이 늦을수록 많고 불결견잠수는 접종초기와 중기에 있어서는 큰 차가 없었지만 후기에 이르러 감소하는 경향이 있고 사육 및 족중폐잠수는 접종시기가 빠를수록 많았다. 4. 농병의 증세는 농즙 접종후 약 3일전후하여 농잠으로서의 특징을 나타내기 시작하였다. 그리고 농병잠이라하여도 영견능력이 있는 것은 상족직전에 접종된 것 중에서 영견개시후 발병되기 때문에 도중에서 토계불능케 되어 박피 또는 중피견 밖에 영견할 수 없는 것이고 또한 경도의 농병잠은 토계기능의 마비상태가 토계불능까지는 되지 않는 것으로 인정되였다. 5. 원종 교잡종을 합하여 44품종에 걸친 불결견잠 출현경향을 조사한 결과 교잡종에 비하여 원종이 불결견잠의 수가 많았고 원종에서도 일본종계통이 많았다. 6. 불결견잠의 견사선에 있어서는 중부계선에 파동이 많았다. 7. 정상숙잠과 농병불결견잠의 잠체 및 소화기의 크기를 비교한 결과 길이에 있어서는 큰 차 없지만 체건-동체 둘레 및 소화기의 나비에 있어서는 농병불결견잠의 것이 훨씬 컸다. 8. 5령 성식기에 낙하충격을 가한 결과 두부하위낙하보다는 경면하위낙하의 것이 또는 온돌과 마루바닥보다는 시멘트바닥에 낙하된 것이 충격이 컸다.

  • PDF