• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.22-28
• /
• 2013

According to a survey, more than 50% of the elders fall which is the most frequent daily safety accident of the elders takes place at home. Furthermore, the elders fall is anticipated to increase as more elderly people are expected to live alone since, 67.1% of the elders of 65 or more do not hope to live with their children. This research aims to verify the fall by measuring and analyzing the floor vibration, and the hardware system was also designed was Piezo Film Sensor, Op-Amp, and DAQ. The system is consists of signal processing part for measuring floor vibration and alarm part for identifying the consciousness of the user when the fall occurs. The fall detection by vibration signals verified by k-Nearest Neighbor verification, and the results showed the error rate of 3.8%.

• Imaging Science in Dentistry
• /
• v.53 no.3
• /
• pp.177-191
• /
• 2023

Purpose: This systematic review examined the detection of the posterior superior alveolar artery, along with various anatomic characteristics, on cone-beam computed tomography images. Materials and Methods: Studies were identified electronically through the Web of Science, MEDLINE, Scopus, and Embase databases. The quality of the included studies was evaluated using a 5-item binary scale. The detection rate, location, and classified diameter of the posterior superior alveolar artery were estimated as prevalence values. The diameter of this artery, as well as the distances from the artery to the alveolar crest and sinus floor, were estimated as means with associated 95% confidence intervals. Results: Thirty-seven studies were enrolled, with 34 of these included in the meta-analysis. The mean detection rate was 79% (range: 72%-84%), and the mean diameter was 1.06±0.05 mm (range: 0.96-1.16 mm). The posterior superior alveolar artery was located intraosseously in 64% of cases. The mean distance of the artery from the alveolar crest was 16.71±0.49 mm (range: 15.75-17.68 mm), while the mean distance from the artery to the sinus floor was 8.85±0.4 mm (range: 8.05-9.64 mm). Conclusion: According to the findings of this meta-analysis regarding various anatomic characteristics of the posterior superior alveolar artery, severe hemorrhage after damage to this artery during sinus augmentation procedures is not a substantial clinical problem.

• Korean Journal of Veterinary Service
• /
• v.29 no.1
• /
• pp.65-70
• /
• 2006

In order to detection of the intestinal parasites, fecal samples were taken from broiler (n=290), parent stock (n=168) and laying hen (n=114) in Jeonbuk province. The prevalence and identification of intestinal parasites were determined by the fecal examination using the floatation method and microscopical examination, respectively. The detection rate of parasite-eggs from 3 flocks (total=572) was 44.9%. In the breed and type of breeding, infection rate of parasite-eggs was detected 65.5% as broiler (floor breeding, 290 chickens), 20.2% as parent stock (floor breeding, 168 chickens) and 28.9% as laying hen (cage breeding, 114 chickens), in order. In the concern of mixed infection such as single and double, the rate were 40.7% and 4.2%, respectively. Six kinds of infective eggs were isolated 257 fecal sample from 3 flock. They were classified 74.7% as Eimeria spp, 18.1% as Ascaridia galli and 6.0% as Capillaria spp and 0.4% as Heteratkis gallinarum, Railleina spp or Trichostrongylus spp, single or in combination.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2037-2042
• /
• 2017

The manufacturing facility is generally operated by a pre-set program under the existing factory automation system. On the other hand, the manufacturing facility must decide how to operate autonomously in Industry 4.0. Determining the operation mode of the production facility itself means, for example, that it detects the abnormality such as the deterioration of the facility at the shop-floor, prediction of the occurrence of the problem, detection of the defect of the product, In this paper, we propose a manufacturing process modeling using a queue for detection of manufacturing process abnormalities at the shop-floor, and detect abnormalities in the modeling using SVM, one of the machine learning techniques. The queue was used for M / D / 1 and the conveyor belt manufacturing system was modeled based on ${\mu}$, ${\lambda}$, and ${\rho}$. SVM was used to detect anomalous signs through changes in ${\rho}$.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.176-184
• /
• 2017

Objectives: Excluding in their homes, children spend most of their time at an elementary school, daycare center, and/or kindergarten. For educational or recreational purposes, they make use of many children's goods at these places. Some children's goods contain phthalates and heavy metals with polyvinyl chloride (PVC), so due to their physiological and behavioral characteristics children are exposed to high concentrations of phthalates and heavy metals. This study aims to measure PVC and heavy metals, which are harmful substances in children's goods which can have an effect on children's health. Methods: Six samples of children's goods were selected through cases of detected harmful substances and the results of previous research, including assembly blocks, model toys, household toys, bags, indoor play equipment, and floor mats. The selected items were measured using X-Ray Fluorescence (XRF), and the presence and content of environmentally harmful substances such as PVC or heavy metals in the materials of children's goods were examined. Results: The highest detection rate for PVC was observed in floor mats, and bags and indoor play equipment were higher than other goods in this regard. The highest detection rate for heavy metals was found in bags, followed by indoor play equipment, assembly blocks, household toys, model toys and floor mats. Except for bags containing heavy metals, five goods showed the highest level of Pb compared to other heavy metals. Floor mats contained the highest level of Pb, Cr, and Cu among all goods. Conclusion: Many children's goods contain PVC and heavy metals, and high levels of heavy metals have been detected in some goods. It is necessary to manage children's goods to support their health.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1204-1208
• /
• 2000

Objectives : At the closure of the transsphenoidal approach(TSA), the proper sellar floor reconstruction plays an important role in preventing postoperative complications. The septal cartilage, perpendicular plate of nasal septum, and the sphenoid sinus bone are usually used to repair the sellar floor as a bone splint. The authors evaluate the usefulness of a silicone plate as a substitute for bone splint to close a defect of the sellar floor. Materials and Methods : A silicone plate was used to repair the sellar floor in 7 patients with sellar lesions which included four pituitary adenomas, two Rathke's cleft cysts and one metastatic tumor. Among seven cases, five cases underwent a standard TSAs and two received a extended TSAs. The trajectories of the approach were sublabial in four cases and endonasal routes in three cases. The silicone plate for implantation was cut to a size of slightly larger than that of bone window and inserted with a three-pronged fork, and then adjusted precisely. Results : In six patients, there were no complications which related to sellar floor reconstruction. A postoperative cerebrospinal fluid(CSF) rhinorrhea was observed in one patient with pituitary macroadenoma. Conclusions : From the authors' experience, the advantages of the silicone plate are its simplicity of molding to fit any size of sellar floor defects, and easy detection of previously created bone window at reoperation.

• Journal of Sensor Science and Technology
• /
• v.18 no.6
• /
• pp.449-455
• /
• 2009

In this paper, we developed a digital gait analyzer using the triaxial accelerometer(TA). An approach for normal gait detection employing decay slope peak detection(DSPD) algorithm was presented. The TA was attached to the center of the waist of a subject. The subject walked a bare floor at 60, 92 and 120 steps/minute. We analyzed vertical axis acceleration signal for gait detection. At 60, 92, 120 steps/minute walking, detection accuracy of gait events were over 99 % accuracy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.5
• /
• pp.315-322
• /
• 2003

Background : Important factors to determine treatment method and prognosis of oral cancer are anatomical site, tumor size, metastatic lesion, histologic cell differenciation and microvascular invasion. Anatomical site has great effect to oral cancer patient's survival rate because each site's accessibility and lymph node metastasis is different but this factor was't studied much than other factors. Patients and Methods : 228 patients with squamous cell carcinoma of common primary sites(Mandible, Maxilla, Floor of Mouth and Tongue) in oral cavity who were diagnosed in the Korea Cancer Center Hospital from January 1989 to December 1999, were clinically studied and analyzed on survival rate. Results : 1. Survival rates of each anatomical sites were Tongue(36.8%), Mandible(33.3%), Maxilla(28.7%) and Floor of Mouth(24.5%). Survival rates difference between Tongue and Floor of Mouth has significance(p<0.05). 2. Survival rates for early cancer of each site were Maxilla(100%), Mandible(57.1%), Tongue(54.2%) and Floor of Mouth(46.7%). Survival rates difference between Maxilla and Floor of Mouth has significance(p<0.05). 3. Survival rates by surgery method of each site were Maxilla(60.6%), Tongue(56.9%), Mandible(44.8%) and Floor of Mouth(26.3%). Survival rates difference between Maxilla and Floor of Mouth has significance(p<0.05). 4. Survival rates by radiation or chemo method of each site were Floor of Mouth(23.5%), Mandible(20.0%), Maxilla(9.5%), and Tongue(9.1%). Survival rates difference between each site doesn't have significance(p>0.05). 5. In advance stage, Survival rates by single therapy of each site were Tongue(33.6%), Mandible(23.5%), Floor of Mouth(16.7%), Maxilla(0%), and Survival rates difference between Maxilla and Tongue has significance (p<0.05). Survival rates by combination therapy of each site were Mandible(38.1%), Maxilla(30.0%), Floor of mouth(18.2%), Tongue(12.5%), and Survival rates difference between Mandible and Tongue has significance(p<0.05). Conclusion : Survival rate of tongue is higher than the other sites, early detection of oral cancer can increase survival rate at any site and combination therapy is the most effetive method, especially at maxilla.

• Structural Engineering and Mechanics
• /
• v.39 no.1
• /
• pp.1-20
• /
• 2011

This study investigates the feasibility of detecting structural damage using the HHT method. A damage detection index, the ratio of bandwidth (RB) is proposed. This index is highly correlated or approximately equal to the change of equivalent damping ratio for an intact structure incurring damage from strong ground motions. Based on an analysis of shaking table test data from benchmark models subjected to adjusted Kobe and El Centro earthquakes, the damage detection index is evaluated using the Hilbert-Huang Transform (HHT) and the Fast Fourier Transform (FFT) methods, respectively. Results indicate that, when the response of the structure is in the elastic region, the RB value only slightly changes in both the HHT and the FFT spectra. Additionally, RB values estimated from the HHT spectra vs. the PGA values change incrementally when the structure response is nonlinear i.e., member yielding occurs, but not in the RB curve from the FFT spectra. Moreover, the RB value of the top floor changes more than those from the other floors. Furthermore, structural damage is detected only when using the acceleration response data from the top floor. Therefore, the ratio of bandwidth RB estimated from the smoothed HHT spectra is an effective and sensitive damage index for detecting structural damage. Results of this study also demonstrate that the HHT is a powerful method in analyzing the nonlinear responses of steel structures to strong ground motions.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.40-51
• /
• 2021

MLS (Mobile Laser Scanning) which is a scanning method done by moving the LiDAR (Light Detection and Ranging) is widely employed to capture indoor PCD (Point Cloud Data) for floor plan generation in the AEC (Architecture, Engineering, and Construction) industry. The movement and rotation of LiDAR in the scanning phase cause deformation (i.e. skew) of PCD and impose a significant impact on quality of output. Thus, a de-skewing method is required to increase the accuracy of geometric representation. De-skewing methods which use position and pose information of LiDAR collected by IMU (Inertial Measurement Unit) have been mainly developed to refine the PCD. However, the existing methods have limitations on de-skewing PCD without IMU. In this study, a novel algorithm for de-skewing 2D PCD captured from MLS without IMU is presented. The algorithm de-skews PCD using scan matching between points captured from adjacent scan positions. Based on the comparison of the deskewed floor plan with the benchmark derived from TLS (Terrestrial Laser Scanning), the performance of proposed algorithm is verified by reducing the average mismatched area 49.82%. The result of this study shows that the accurate floor plan is generated by the de-skewing algorithm without IMU.