• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.95-95
• /
• 2020

Urban flooding occurs in the form of internal-water inundation on roads and lowlands due to heavy rainfall. Unlike in the case of rivers, inundation in urban areas there is lacking in research on predicting and warning through measurement data. In order to analyze urban flood patterns and prevent damage, it is necessary to analyze flooding measurement data for various rainfalls. In this study, the pattern of urban flooding caused by rainfall was analyzed by utilizing the urban flooding measuring sensor, which is being test-run in the flood prone zone for urban flooding management. For analysis, 2019 rainfall data, surface water depth data, and water level data of a street inlet (storm water pipeline) were used. The analysis showed that the amount of rainfall that causes flooding in the target area was identified, and the timing of inundation varies depending on the rainfall pattern. The results of the analysis can be used as verification data for the urban inundation limit rainfall under development. In addition, by using rainfall intensity and rainfall patterns that affect the flooding, it can be used as data for establishing rainfall criteria of urban flooding and predicting that may occur in the future.

• Nuclear Engineering and Technology
• /
• 제39권3호
• /
• pp.215-220
• /
• 2007

The existing flooding Probabilistic Safety Analysis(PSA) was updated to reflect the Korean plant specific operating experience data into the flooding frequency to improve the PSA quality. Both the Nuclear Power Experience(NPE) database and the Korea Nuclear Pipe Failure Database(NuPIPE) databases were used in this study, and from these databases, only the Pressurized Water Reactor(PWR) data were used for the flooding frequencies of the flooding areas in the primary auxiliary building. With these databases and a Bayesian method, the flooding frequencies for the flooding areas were estimated. Subsequently, the Core Damage Frequency(CDF) for the flooding PSA of the Ulchin(UCN) unit 3 and 4 plants based on the Korean Standard Nuclear Power Plant(KSNP) internal full-power PSA model was recalculated. The evaluation results showed that sixteen flooding events are potentially significant according to the screening criterion, while there were two flooding events exceeding the screening criterion of the existing UCN 3 and 4 flooding PSA. The result was compared with two kinds of cases: (1) the flooding frequency and CDF from the method of the existing flooding PSA with the PWR and Boiled Water Reactor(BWR) data of the NPE database and the Maximum Likelihood Estimate(MLE) method and (2) the flooding frequency and CDF with the NPE database(PWR and BWR data), NuPIPE database, and a Bayesian method. From the comparison, a difference in CDF results was revealed more clearly between the CDF from this study and case (2) than between case (1) and case (2). That is, the number of flooding events exceeding the screen criterion further increased when only the PWR data were used for the primary auxiliary building than when the Korean specific data were used.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.949-958
• /
• 2024

In contrast to all-time flooded small modular reactor (SMR) systems, an in-kind flooding safety system (FSS) has been proposed as a passive safety system applicable to small modular reactors (SMRs) that adopt a metal containment vessel (MCV). Under transient conditions, the FSS can provide emergency cooling to dry reactor cavities and sustain long-term coolability using re-acquired evaporated steam in the reactor building on demand. When designing an FSS, the effect of the flooding flow area is vital as it affects the overall accident sequence and safety. Therefore, in this study, a MELCOR model of a reference SMR is developed and numerical analysis is performed under postulated accident scenarios. Without flooding, the MCV pressure of the reactor module exceeds the design pressure before core damage. To prevent core damage, an emergency flooding strategy is devised using various flow path parameters and requirements to ensure an adequate emergency coolant supply before the core damage is investigated. The results indicate that a flow area exceeding 0.02 m2 is required in the FSS to prevent MCV overpressure and core damage. This study is the first to report a strategic analysis for appropriately sizing an FSS flooding valve applicable to innovative SMRs.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.97-97
• /
• 2020

Flooding in urban areas is caused by heavy rains for a short period of time and drains within 1 to 2 hours. It is also characterized by a small flooding area. In addition, flooding is often caused by various and complex causes such as land use, basin slope, pipe, street inlet, drainage pumping station, making it difficult to predict flooding. Therefore, this study analyzes the effect of each basin characteristic on the occurrence of flooding in urban areas by correlating various basin characteristics, whether or not flooding occurred, and rainfall(Limit Rainfall), and intends to use the data for urban flood prediction. As a result of analyzing the relationship between the imperviousness and the urban slope, pipe, threshold rainfall and limit rainfall, the pipe showed a correlation coefficient of 0.32, and the remaining factors showed low correlation. However, the multiple correlation analysis showed the correlation coefficient about 0.81 - 0.96 depending on the combination, indicating that the correlation was relatively high. In the future, I will further analyze various urban characteristics data, such as area by land use, average watershed elevation, river and coastal proximity, and further analyze the relationship between flooding occurrence and urban characteristics. The relationship between the urban characteristics, the occurrence of flooding and the limiting rainfall amount suggested in this study is expected to be used as basic data for the study to predict urban flooding in the future.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.225-233
• /
• 2001

Oxygen flooding을 이용한 Secondary ion Mass Spectrometry(SIMS) 분석에 있어서 표면에 산화막이 있을 때 발생하는 SIMS depth profile의 왜곡현상에 대한 원인을 분석하고 이를 보정하였다. 이러한 왜곡현상은 표면 산화막에서와 Si 매질에서의 sputter rate이 다른 데서 발생하는 깊이 보정 오류와 상대감도인자(relative sensitivity factor, RSF)가 다른 데서 발생하는 농도보정 오류로부터 발생됨이 밝혀졌다. 깊이보정 오류를 바로잡기 위하여 $N^a+$ 이온을 산화막과 Si 매질의 계면에 대한 marker로 사용하였으며 산화막 두께는 SEM 및 XPS로 측정하였다. 산화막과 Si 매질에서의 sputter rate 및 RSF의 차이는 주로 oxygen flooding이 유발한 산화막 형성시의 부피팽창에 의한 것으로 해석되었으며 이를 보정한 depth profile은 oxygen flooding없이 분석한 경우와 거의 동일한 결과를 보여주었다.

• 한국컴퓨터정보학회논문지
• /
• 제14권9호
• /
• pp.55-66
• /
• 2009

본 논문에서는 인터넷 보급으로 우리 생활 속에 급성장하여 널리 이용되고 있는 대형 포털 및 소셜 네트워크서비스를 공격하여 개인 고객의 데이터베이스를 가로채고 웹사이트의 정상적인 서비스를 방해하는 DDoS(Distribute Denial of Service Attack) 분산 서비스 공격에 대해 알아보고자 한다. 공격 유형중에 TCP SYN Flooding 공격은 많은 트래픽을 유발시키지 않으면서도 공격 형태가 정상적인 트랜잭션의 형태를 가지고 있으므로 공격에 대한 탐지가 쉽지 않다. 이에 대해 본 논문에서는 기존의 탐지방법은 False Alarm을 유발할 가능성을 많이 가지고 있으므로 이를 보다 정확하게 탐지하기 위한 방안을 모색하고 제안하고자 하며, Backscatter 현상을 탐지하여 TCP SYN Flooding 공격을 감지하는 알고리즘을 제안하고자 한다.

• 대한토목학회논문집
• /
• 제38권2호
• /
• pp.261-268
• /
• 2018

본 연구에서는 홍수총량을 시간에 따라 분포시키는 단순홍수범람해석 모형인 SIMOD(Simplified Inundation MODel)를 이용하여 도심지 침수분석을 실시하고자 하였다. 기존의 침수분석 모형들은 입력자료 구축이 어렵고, 분석시간이 오래 걸리는 등의 단점을 가지고 있다. SIMOD는 다중흐름방향법(Multi Direction Method, MDM)과 평수가정법(Flat-Water Assumption, FWA)의 두 흐름 방정식으로 홍수흐름을 단순화시킨 모형으로, 대상지역의 지형자료와 유입 홍수량 등 간단한 수문자료만을 이용하여 홍수범람에 의한 침수경로 분석이 가능하여 신속한 모델링으로 빠른 의사결정을 할 수 있다는 장점이 있다. 따라서 SIMOD 모형을 이용하여 도심지 침수분석을 실행한 뒤, 기존의 침수분석 모형인 FLO-2D 모형분석결과와 비교를 시행하여 모형의 적용성을 분석하였다. 대상지역은 도심지 지역의 제방 월류-파제 시나리오를 적용하기 위해 하천이 인접해 있고, 충분한 높이의 제방이 있는 금호강 하류에 위치한 성서제를 대상지역으로 선정하였으며, 지형자료는 기존의 침수분석에 사용하는 DEM지형자료와 도심지 건물군, 도로 분포 등을 표출할 수 있는 DSM지형자료를 이용하였다. 입력 홍수량은 200년 빈도계획홍수위를 기준으로 제방파제시나리오를 적용 사각웨어식을 적용하여 산정하였으며, 1~24시간의 모의시간과 침수면적을 비교 분석하였다. SIMOD의 경우 24시간 모의시간이 7분 안으로 나타났으며 면적차이는 FLO-2D와 비교했을 때 20% 내외로 나타났다. 또한 DSM을 이용하여 분석한 결과 도로나 건물의 영향이 반영되어 앞으로 도심지에서 DSM을 이용한 지형자료의 필요성을 확인하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.548-549
• /
• 2005

• 한국수소및신에너지학회논문집
• /
• 제20권5호
• /
• pp.390-396
• /
• 2009

The flooding, especially in channel, is one of the critical issue to put proton exchange membrane fuel cell (PEMFC) to practical use. In this paper, channel flooding was investigated the pressure difference at cathode channel outlet. A ratio of pressure difference changes to 25, 50% as its variation rate. The pressure variable rate is reflected in dimensionless number FN. As a result, modified dimensionless number $FN^*$ correctly predicted the channel flooding. This study analyzes that a variety of pressure difference is how to affect flooding at the cathode of the PEMFC.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.271-276
• /
• 2009

Under current design standard, sewers are designed to drain stormwater generated up to 10 year return period of storms. This implies sewer flooding could occur from rainfall exceeding a 10 year return period. 5, 10, 20 and 30 year return period of storm intensities were calculated for 22 locations (cities) of meterological stations over the nation and compared to the recorded rainfall intensities for the last 30 years. The comparison resulted in the numbers of year maximum rainfall intensities exceeded each return period. Using the questionnaire survey for "the incidences of flooding since 1980" of the previous paper (Survey on sewerage operation/management planning for flooding (I)), the actual rainfall records on the date of flooding events were analyzed to demonstrate the number of flooding events caused by the exceedance of sewer capacity. For the last 30 years, more than 6 years of year maximum rainfall intensity (20%) were larger than the 10 year return period of storm in 4 cities of the 22 used for the first analysis. The number of rainfall records that exceeded the 10 year return period was 50 of the 260 actual flooding events investigated from the survey.