• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.43-51
• /
• 2006

Through the result of calculating the deviation between the value calculated from two-dimensional number formula, one-dimensional number interpretation, and curving part water surface type calculation method, we could confirmed that the deviation is reduced more than 50% when we use curving part water surface type calculation method. Also it was confirmed that there occurs the reduction rate of maximum 59% as the result of comparing with one-dimensional number interpretation since the reduction rate of safe room height was 20%, in 500 CMS of flood water quantity when we planted the construction of levee by curving part water surface type calculation method. And therefore, we have confirmed that the curving water surface type calculation method can be used as a simple formula in rivers with water quantity less than 500 CMS that flows in and out in Jess than 90 degree angle.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.267-267
• /
• 2016

Extreme events, such as Winnie(1987), Rusa(2002), Maemi(2003) at sea-side urban area, resulted not only economic losses but also life losses. The Korean sea-side characterisitcs are so complicated thar the prediction of sea level rise makes difficult. Geomophologically, Korean pennisula sits on the rim of the Pacific mantle so the sea level is sensitive to the surges due to earth quake, typoon and abnormal climate changes. These environmetns require closer investigation for the preparing the inundatioin due to the sea level rise with customized prediction for local basin. The goal of this research is provide the information of inundation risk so the sea side urban basin could be more safe from the natural water disastesr.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.37-45
• /
• 2021

Flooding damage may occur due to an unexpected increase in rainfall in summer. Previously, the roughness coefficient, which is a major factor of conveyance, was calculated through on-site measurement, but in case of on-site measurement, there are many limits in accurately grasping changes in vegetation. In this study, the vegetation index (NDVI) was calculated using the Sentinel-2 optical images, and the modified roughness coefficient was calculated through the density and distribution area of the vegetation. Then the calculated roughness coefficient was applied to HEC-RAS 1D model and verified by comparing the results with the water level at the water level station directly downstream of the Soyang River dam. As a result, the error rate of the water level decreased about 14% compared to applying the previous roughness coefficient. Through this, it is expected that it will be possible to refine the flood level of rivers in consideration of seasonal flood characteristics and to efficiently maintain rivers in specific sections.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.495-505
• /
• 2014

The retention basin is a river-facility for the flood mitigation by storing the river flow temporarily. The new 3 retention basins are installed in these regions YeoJu, NaJu, YoungWol by the Large River Management Project. In this study, 1D and 2D numerical flow simulation are conducted to evaluate the reduction effect of the peak flood stage for the YeoJu retention basin. HEC-RAS and FLDWAV models are used for 1D simulation with the option of retention basin. CCHE2D model is used for 2D simulation with the same hydrograph used in 1D simulation. It is verified that the peak flood stage is reduced very largely about 0.13 m near the overtopping section of the levee in 1D simulation. It is verified that the peak flood stage is reduced very largely about 0.20 m at the upstream-end of the simulated reach in 2D simulation. 2D simulation for the retention basin is more reasonable because physical characteristics of topography in the model, and also more advantageous for the evaluation of the flow characteristics of the in- and outside of the retention basin on the results of simulation of this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.537-544
• /
• 2017

An experimental study was carried out to investigate the characteristics of the propagation distance of a flood wave considering the levee failure speed in a flat inundation area. The Ritter solution for one dimensional flow was considered to formulate the experimental results and a representative form with coefficients of k and m, which consider the three dimensional flow characteristics, was applied. The experiments showed that the propagation velocity of the wave front in the inundation area was influenced by the levee breach speed as well as the initial water level, which is a significant variable representing the flood wave behavior. In addition, coefficients k and m are not constants, but variables that vary with levee breach speed. An empirical formula was also suggested using the experimental results in the form of the relationships between k and m. In this study, a large-scale experiment for flood inundation was carried out to examine the behavior of flooding in the inundated area and the relationships between the levee breach speed and wave-front propagation velocity were suggested based on the experimental results. These research results are expected to be used as the baseline data to draw a flow inundation map, establish an emergency action plan, and verify the two-dimensional numerical model.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.132-142
• /
• 2003

A significant deficiency of most computer models used for stream floodplain analysis, is that the locations of structures impacted by flood waters, such as roads, buildings, and bridges, cannot be effectively compared to the floodplain location. The purpose of this study is the integration of the HEC River Analysis System(HEC-RAS) with ArcView geographic information system to develop a regional model for floodplain determination and representation. Also this study presents to enable two- and three-dimensional floodplain mapping and analysis in the ArcView. The methodology is applied to a Yeoju of Kyunggi-do, located in South Han River Basin. A digital terrain model is synthesized from HEC-RAS cross-sectional data and a digital elevation model of the study area. The flood plain data developed in ArcView was imported into HEC-RAS where it was combined with the field surveyed channel data in order to construct full floodplain cross sections that reflected accurate channel and overbank data for the HEC-RAS model. The flood plain limits could be expressed more accurately on ArcView by using water level data to be computed in HEC-RAS program. The computed water surface elevations and information of cross-section must be manually plotted in order to delineate floodplains. The resulting of this study provided a good representation of the general landscape and contained additional detail within the stream channel. Overall, the results of the study indicate that GIS combined with HEC-RAS is proven to be very useful and efficient for the automatic generation of flood maps, and an effective environment for floodplain mapping and analysis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.52-67
• /
• 2008

Recently, frequent occurrence of flash floods caused by climactic change has necessitated prompt and quantitative prediction of precipitation. In particular, the usability of rainfall radar that can carry out real-time observation and prediction of precipitation behavior has increased. Moreover, the use of distributed hydrological model that enables grid level analysis has increased for an efficient use of rainfall radar that provides grid data at 1km resolution. The use of distributed hydrologic model necessitates grid-type spatial data about target basins; to enhance reliability of flood runoff simulation, the use of visible and precise data is necessary. In this paper, physically based $Vflo^{TM}$ model and ModClark, a quasi-distributed hydrological model, were used to carry out flood runoff simulation and comparison of simulation results with data from Imjin River Basin, two-third of which is ungauged. The spatial scope of this study was divided into the whole Imjin River basin area, which includes ungauged area, and Imjin River basin area in South Korea for which relatively accurate and visible data are available. Peak flow and lag time outputs from the two simulations of each region were compared to analyze the impact of uncertainty in topographical parameters and soil parameters on flood runoff simulation and to propose effective methods for flood runoff simulation in ungauged regions.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.497-510
• /
• 2011

A levee height is determined by adding a deterministic freeboard to a flood water level in Korea. In the USA, a levee height is determined by choosing a value conditionally among the freeboard criteria and the levels resulted from a probabilistic method. The probabilistic method adopts a conditional non-exceedance probability (CNP) which is the probability that the target stage will not be exceeded given a specific flood event. The purpose of the study is to compare Korean criterion for levee height estimation with that of the USA. Levee heights were determined according to the above two criteria at twenty-five cross sections in five streams. The results show that Korean criterion on average yields levee heights 20 cm higher than those calculated by the criterion of the USA. The larger the flood discharges become, the higher the levee height differences are usually. It is caused by the freeboard estimation criterion of Korea that the larger design flood is, the higher freeboard is given. Korean criterion, however, resulted in lower levee heights for smaller streams than those by the criterion of the USA. To sum it up, the Korean levee height criteria can result in overestimation or underestimation depending on flood discharge amount, being compared with the criteria of the USA. The Korean freeboard especially needs to be increased for smaller flood discharges.

• Journal of Korea Water Resources Association
• /
• v.54 no.5
• /
• pp.347-354
• /
• 2021

In the past few years, various damages have occurred in the vicinity of rivers due to flooding. In order to alleviate such flood damage, structural and non-structural measures are being established, and one of the important non-structural measures is to establish a flood warning system. In general, in order to establish a flood warning system, the water level of the flood alarm reference point is set, the critical flow corresponding thereto is calculated, and the warning precipitation amount corresponding to the critical flow is calculated through the Geomorphological Instantaneous Unit Hydrograph (GIUH) rainfall-runoff model. In particular, when calculating the critical flow, various studies have calculated the critical flow through the Manning formula. To compare the adequacy of this, in this study, the critical flow was calculated through the HEC-RAS model and compared with the value obtained from Manning's equation. As a result of the comparison, it was confirmed that the critical flow calculated by the Manning equation adopted excessive alarm precipitation values and lead a very high flow compared to the existing design precipitation. In contrast, the critical flow of HEC-RAS presented an appropriate alarm precipitation value and was found to be appropriate to the annual average alarm standard. From the results of this study, it seems more appropriate to calculate the critical flow through HEC-RAS, rather than through the existing Manning equation, in a situation where various river projects have been conducted resulting that most of the rivers have been surveyed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.257-266
• /
• 2021

Urban areas can often suffer flood damage because of the more frequent catastrophic rainfall events from climate change. Flood mitigation measures consist of (1) structural and (2) non-structural measures. In this study, the proposed method focused on operating an urban drainage system among non-structural measures. The combined inland-river operation technique estimates the inflow of pump stations based on the water level obtained from a preselected monitoring point, and the pump station expels the stored rainwater to the riverside based on those estimates. In this study, the proposed method was applied to the Mokgam drainage watershed, where catastrophic rainfall events occurred (i.e., 2010- and 2011-years), and severe flood damage was recorded in Seoul. Using the proposed method, the efficiency of flood reduction from the two rainfall events was reduced by 34.9 % and 54.4 %, respectively, compared to the current operation method. Thus, the proposed method can minimize the flood damage in the Mokgam drainage watershed by reserving the additional storage space of a reservoir. In addition, flooding from catastrophic rainfall can be prevented, and citizens' lives and property in urban areas can be protected.