• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.452-460
• /
• 2010

This study carried out stability evaluation for design flood stage of vegetation models with river sites using 1D HEC-RAS and 2D RMA-2 numerical models. The vegetation models established in this study were divided into which channel reaches consist of urban, rural and mountain rivers with the social and cultural significance of the sites. Examination results from the numerical models showed a similar aspect with the design flood stage of these rivers before vegetation modeling. Also, no embankment overflow was shown from the urban river with additional vegetation density of 25%, although there were approximately 0.20m rising in the flood stage. In case of ural and mountain rivers, vegetation models showed scarce rising in flood stage.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.49-56
• /
• 2010

Considering the flood problem in urban areas, it is important to estimate disaster risk using accurate numerical analysis for inundation. In this study, it is carried out to calculate inundation depth in Samcheok city which suffered from serious flood damage in 2002. The urban flood model was developed by cording Manning n, elevation, and building's rare on ArcGIS for reducing error on data exchange, and applied for estimating flood damage by grid. This paper describes the extraction of sewer lines and buildings area, estimates its influence on flood inundation extent, and integrated 1D/2D flow to simulate inundation depth in high-density building area. This paper shows an integrated urban flood modeling including rainfall-runoff, inundation simulation, and mathematical flood damage estimation, and will serve drainage design for reducing its damage.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.39-48
• /
• 2015

In this study, we evaluated flood risk by applying calculation fomula considering practical risk calculated by inundation analysis information through 2D inundation analysis, suggested a plan that provides a standardized information system. Generally, we evaluated flood risk to people and classified four degrees by using inundation depth, velocity, Debris Factor and Flood Hazard Rating relationship because current flood risk assessment method based inundation depth and area was considered to not fully reflect the actual risk to people on flood. We simulated overflow and levee break scenarios according to 500 year and 200 year floods, respectively, by using Flumen which is a 2D flood inundation model for Geumho river basin in Daegu. The result of this study could contribute to inform practical risk information to people in expected flood area. This study can be useful for the fields of disaster estimatingsuch as information analysis, evaluation, planning by offering Risk information based on standardized information system.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.151-156
• /
• 2011

Previously most of flood prevention efforts have been made for relatively large watersheds near to channel flow. However, as economical development and the expansion of leisure areas to mountainous region, human casualty by flash flood occurs frequently, requiring additional prevention activity. Therefore, to reduce the damage of human lives and property by flash flood, we develop an assessment method for flash flood occurrence for mountainous areas considering various factors involving it. PROMETHEE(Preference Ranking Organization METHod for Enrichment Evaluations) which is one of the MCDM(Multi-Criteria Decision Making) was adopted to assess the contribution of each factor to the risk of the flash flood in the mountainous area. The main evaluation criteria are classified into three categories, namely, the regional and rainfall characteristics, and geographical features. Also, the Entropy method is used to determine the weight of each evaluation criteria without survey. The suggested method based on PROMETHEE with Entropy method is applied to BongHwa region to verify its applicability. After applied, the method successfully assesses the relative risk of flash flood occurrence of each sub region in the BongHwa region. Out of the seventeen sub-regions, five, seven and five of them are evaluated as high-risk, medium-risk, and low-risk, respectively. To verify the results, we searched the historical data of flash flood and the flash flood had occurred in one of high-risk sub-regions at 2008.

• Journal of Korea Water Resources Association
• /
• v.47 no.2
• /
• pp.207-221
• /
• 2014

Recently, due to global warming, climate change has affected short time concentrated local rain and unexpected heavy rain which is increasingly causing life and property damage. Therefore, this paper studies the characteristic of localized heavy rain and flash flood in Nakdong basin study area by applying Data Mining method to predict flood and constructing water level predicting model. For the verification neural network from Data Mining method and hydraulic flood routing was used for flood from July 1989 to September 1999 in Nakdong point and Iseon point was used to compare flood level change between observed water level and SAM (Slope Area Method). In this research, the study area was divided into three cases in which each point's flood discharge, water level was considered to construct the model for hydraulic flood routing and neural network based on artificial intelligence which can be made from simple input data used for comparison analysis and comparison evaluation according to actual water level and from the model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.173-173
• /
• 2015

The flood water level in tidal river is determined by the joint effects of flood discharge and tidal water levels at downstream boundary. Due to the variable tidal boundary conditions, the evaluated design water levels associated with a certain flood event can be significantly different. To avoid determining of design water levels just by a certain tidal boundary condition and remove the influence of variability in boundary condition from the evaluation of design water levels, a probabilistic approach is considered in this study. This study focuses on the development of a method to evaluate the realistic design water levels in tidal river with taking into account the combined effects of river discharge and tidal level. The flood water levels are described by the joint probability of two driving forces, river discharge and tidal water levels. The developed method is applied to determine design water levels for the tidal reach of the Han River. An unsteady flow model is used to simulate the flow in the reach. To determine design water levels associated with a certain flood event, first, possible boundary conditions are obtained by sampling starting times of tidal level time series; then for each tidal boundary condition, corresponding peak water levels along the channel are computed; and finally, design water levels are determined by computing the expectations of the peak water levels. Two types of tides which are composed by different constituents are assumed (one is composed by $M_2$, and the other one is composed by $M_2$ and $M_2$) at downstream boundary, and two flood events with different maximum flood discharges are considered in this study. It is found that (a) the computed design water levels with two assumed tides have no significant difference for a certain flood event, though variability of peak water levels due to the tidal effect is considerably different; (b) tidal effect can reach to the Jamsil submerged weir and the effect is obvious in the downstream reach of the Singok submerged weir; (c) in the tidally affected reach, the variability of peak water levels due to the tidal effect is greater if the maximum flood discharge is smaller.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.264-267
• /
• 2004

In identifying flood vulnerable areas, three methods are generally deployed: the geomorphology method which is based on topographic features; the past evidence method based on observed data of past actual floods; and, prediction of flood areas through hydrologic models. This study aims to improve the prediction model of the geomorphology method through the application of fuzzy method in GIS modeling. The generally used GIS method of superimposing thematic map layers assumes crisp boundaries of the layers, which results in either risk-averse solutions or risk-taking solutions. The introduction of fuzzy concepts to processing of evaluation criteria (DEM, slope, aspect) solves this problem. As the result of applying the fuzzy method to a test site in the west Nak-Dong river, similar flood vulnerable areas were predicted as when using the conventional Boolean criteria. The resulting map, however, showed varying degree of uncertainty of flooding in these areas. This extra information is deemed to be valuable in taking phased actions during flood response, leading to a more effective and timely decision-making.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.73-82
• /
• 2013

The main objective of this study was to evaluate Representative Concentration Pathways (RCP) scenarios-based flood risk at a Si-Gun level. A bias correction using a quantile mapping method with the Generalized Extreme Value (GEV) distribution was performed to correct future precipitation data provided by the Korea Meteorological Administration (KMA). A series of proxy variables including CN80 (Number of days over 80 mm) and CX3h (Maximum precipitation during 3-hr) etc. were used to carry out flood risk assessment. Indicators were normalized by a Z-score method and weighted by factors estimated by principal component analysis (PCA). Flood risk evaluation was conducted for the four different time periods, i.e. 1990s, 2025s, 2055s, and 2085s, which correspond to 1976~2005, 2011~2040, 2041~2070, and 2071~2100. The average flood risk indices based on RCP4.5 scenario were 0.08, 0.16, 0.22, and 0.13 for the corresponding periods in the order of time, which increased steadily up to 2055s period and decreased. The average indices based on RCP8.5 scenario were 0.08, 0.23, 0.11, and 0.21, which decreased in the 2055s period and then increased again. Considering the average index during entire period of the future, RCP8.5 scenario resulted in greater risk than RCP4.5 scenario.

• Journal of Korea Water Resources Association
• /
• v.46 no.10
• /
• pp.1017-1028
• /
• 2013

The purpose of this research is to develop an Integrated Water Resources Evaluation Index (IWREI) which can used to assess the performance of water resources projects in a regional perspective focusing on three major sectors including water use, flood, and river environment in water resources policies. The IWREI is estimated by integrating the Water Use Vulnerability Index (WUVI), the Flood Vulnerability Index (FVI), and the River Environment Vulnerability Index (REVI) which represent the vulnerability in each sector. These indices consist of total 26 indicators selected from the pressure indicators representing the causes of damages in water use, flood, and river environment, the state indicators and the response indicators. The estimated index describes the vulnerability and effectiveness of policies with five levels: Low, Medium Low, Medium, Medium High, and High. The results of evaluating total 115 hydrological units in Korea using the WUVI, FVI, REVI, and IWREI indicate that the project effectiveness in water resources policies is clearly verified by the improved index results compared to the past (early 1990s). Regional vulnerability and evaluation indices developed in this research could be used to establish goals of water resources policy and to select priority regions for project implementation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.90-94
• /
• 2009

The inundation of substation and ground power equipment breaks out every summer season in low-lying downtown and low-lying shore by localized heavy rain, typhoon and tidal wave. For diminishing flood damage of electrical equipment in the root, flood protection system which is used the basic frame of Pad transformer is developed using pneumatic pressure. This system is established on pressure generator equipment and sensor of flooded level operates at flooding occurrence and is maintained a shutting tightly structure. The system is able to protect indraft water in Pad Transformer and supply the electricity at emergency(flooding). And we tested safety for insulation resistance at flooding and applying an electrical current. We estimate that loss cost which is caused by with flooding and the power failure will be diminished if it is addition to advances the reliability evaluation by setting an example.