• Title/Summary/Keyword: Floating structure

Search Result 697, Processing Time 0.028 seconds

Fabrication and characterization of $WSi_2$ nanocrystals memory device with $SiO_2$ / $HfO_2$ / $Al_2O_3$ tunnel layer

  • Lee, Hyo-Jun;Lee, Dong-Uk;Kim, Eun-Kyu;Son, Jung-Woo;Cho, Won-Ju
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.134-134
    • /
    • 2011
  • High-k dielectric materials such as $HfO_2$, $ZrO_2$ and $Al_2O_3$ increase gate capacitance and reduce gate leakage current in MOSFET structures. This behavior suggests that high-k materials will be promise candidates to substitute as a tunnel barrier. Furthermore, stack structure of low-k and high-k tunnel barrier named variable oxide thickness (VARIOT) is more efficient.[1] In this study, we fabricated the $WSi_2$ nanocrystals nonvolatile memory device with $SiO_2/HfO_2/Al_2O_3$ tunnel layer. The $WSi_2$ nano-floating gate capacitors were fabricated on p-type Si (100) wafers. After wafer cleaning, the phosphorus in-situ doped poly-Si layer with a thickness of 100 nm was deposited on isolated active region to confine source and drain. Then, on the gate region defined by using reactive ion etching, the barrier engineered multi-stack tunnel layers of $SiO_2/HfO_2/Al_2O_3$ (2 nm/1 nm/3 nm) were deposited the gate region on Si substrate by using atomic layer deposition. To fabricate $WSi_2$ nanocrystals, the ultrathin $WSi_2$ film with a thickness of 3-4 nm was deposited on the multi-stack tunnel layer by using direct current magnetron sputtering system [2]. Subsequently, the first post annealing process was carried out at $900^{\circ}C$ for 1 min by using rapid thermal annealing system in nitrogen gas ambient. The 15-nm-thick $SiO_2$ control layer was deposited by using ultra-high vacuum magnetron sputtering. For $SiO_2$ layer density, the second post annealing process was carried out at $900^{\circ}C$ for 30 seconds by using rapid thermal annealing system in nitrogen gas ambient. The aluminum gate electrodes of 200-nm thickness were formed by thermal evaporation. The electrical properties of devices were measured by using a HP 4156A precision semiconductor parameter analyzer with HP 41501A pulse generator, an Agillent 81104A 80MHz pulse/pattern generator and an Agillent E5250A low leakage switch mainframe. We will discuss the electrical properties for application next generation non-volatile memory device.

  • PDF

A Study on the Sun-Moon-Stars(日月星辰) appeared in Huang Ti Nei Chin(『黃帝內經』) (『황제내경(黃帝內經)』에 나타난 일월성진(日月星辰)에 관(關)한 연구(硏究))

  • Park, Chan-Yeong;Kim, Gi-Uk;Park, Hyeon-Guk
    • The Journal of Dong Guk Oriental Medicine
    • /
    • v.5
    • /
    • pp.281-306
    • /
    • 1996
  • A study on the effect of the Sun-Moon-Stars(日月星辰) in Huang Ti Nei Ching("黃帝內經") on the formation of the Yunqi theory(運氣理論) have revealed following conclusions. 1. There was a record of Stars(星辰) written by Gabgol-Character(甲骨文字) in the Yin(殷) Dynasty. But the very first documentary records of Stars(星辰) is Shu Jing("書經"). Ancient astronomy had the tendency of astrology of combined with theory of the Five Elements(五行) and finally effects the theory of formation of Huang Ti Nei Ching("黃帝內經"). 2. Shu Jing("書經") said that Junrak(錢樂) made an Armillary sphere(運天儀) in the Sung(宋) Dynasty. And in the Jin(秦) and the Han(漢) Dynasty, they already observed the stars. The Sunkiokhyung(璿機玉衡) which is machinery of star-observing, became to be called an Armillary sphere (運天儀) by the pass of times. 3. As of the theory of the Cosmos-structure(宇宙-構造論) in Ohanunhangdaeron("五運行大論"), Guiyugu(鬼兒區) announced the Hypothesis of Covering Heaven(蓋天說) but Kibak(岐伯) supported the Hypothesis of chaosheven's(蓋天說) and in the theory of atmosphere(大氣論) in Ohanunhangdaeron("五運行大論") said that the earth was in Great Empty(太虛) and it was floating in the universe by the Great Chi(大氣). 4. The knowledge about the Five stars(五星) in Huang Ti Nei Ching("黃帝內經") is presented in the section of Gemgwejineonron("金?眞言論"), Gigoupyondaeron("氣交變大論"), Youkwonjeonggidaeron("六元正紀大論").ln the method of identifying the Five stars(五星) presented the criteria of the brightness, the altitude, the colours and the orbit etc. 5. The jupiter which has twelve year's revolution cycle was the basis of determination on the Twelve constellation(12辰), the Twelve field of heaven(12次), the Twelve Houses in the ecliptic(黃道 12宮), the Twelve Earth's Branches(12支) and the Twelve fields of Earth(12分野) and also it became the origin of the duodecimals(12進法). 6. The saturn having about twenty-eight year's revolution cycle became the criterion in identifying the Twenty Eight Constellations(28宿) which was used as the coordinates of the Celestial sphere (天球). 7. By the Percussional movement(歲差運動), the position of polaris and the Vernal-Antumal equinox(春秋分点) were shifted. Therefore the ancient the Heaven Gate-Earth Door(天門-地戶) changed from the position of Sil-Byuk(室壁), Yik-Jin(翼軫). And the precisional movements brought about the concept of the WunHoyYunSe(元會運世) that is a method of dividing a period. Also the precisional movement gave three dimension(三次元) foundation interpreted the Sixty JiaZi (六十甲子) which is revolving through sixty years uniformally. 8. The Hypothesis of the Nine Houses and Eight Winds(九宮八風論) which is one field of the astrology of ancient polaris-nine Houses divination plate(太一九宮占盤) brought about the concept of deficiency and excess and the concept of the Wind Vice(風邪). In the Calendar System(曆法) presented in Huang Ti Nei Ching("黃帝內經") the tropical year of the Sun-Moon-Stars(日月星辰) and the revolution and the rotation of the earth give explanations the changes of Yin-Yang(陰陽) by the use of the ten Celestial branches(十干) and the twelve Earth branches(十二支).

  • PDF

Difference in Shoreline Flora According to the Usage of Reservoirs in Korea (우리나라 저수지의 용도에 따른 호안 식물상 차이)

  • Cho, Hyunsuk;Cho, Kang-Hyun
    • Journal of Wetlands Research
    • /
    • v.17 no.4
    • /
    • pp.339-347
    • /
    • 2015
  • Differences in characteristics of flora and environmental factors of geomorphology, hydrology, water quality and soil were investigated in the shoreline of total 35 reservoirs according to their usages of waterpower generation, agricultural water supply, residential and industrial water supply and flood control in Korea. The number of plant species, floral structure and characteristics of species traits in the shoreline of reservoirs were different according to their usage. From the results of stepwise regression analysis, the total number of vascular plant species was increased at the environment of the higher flood frequency at the median water level and the longer exposure duration of the shoreline. The results of principal coordinates analysis and cluster analysis showed that the shoreline flora was classified as the 3 types of 1) flood control and residential and industrial water supply, 2) agricultural water supply and 3) waterpower generation reservoirs. The water level fluctuation, flood frequency at the median water level, lake water quality index and exposure duration of the shoreline were selected as important environmental factors affected on the characteristics of shoreline flora. The species richness of total flora and hydrophytes, especially submerged macrophytes, were much higher in the reservoirs for the purpose of the waterpower generation in which mesotrophic water quality and stable water levels were maintained. Annual or biennial ruderals were established on the ephemeral drawdown zone of flood control, residential and industrial water supply reservoirs which have oligotrophic or mesotrophic water quality and wide range of water level fluctuation. The floating hydrophytes were differentially dominated in the littoral zones of the agricultural water supply reservoirs with a mesotrophic or eutrophic water quality and a medium water level fluctuation. In conclusion environmental factors related to water level fluctuation and water quality were different and then the floral characteristics of shoreline were distinguishable according to usage of Korean reservoirs.

An Investigation of Higher Order Forces on a Vertical Truncated Cylinder

  • Boo, Sung-Youn
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2003.05a
    • /
    • pp.214-214
    • /
    • 2003
  • During a model test of Hutton TLP, a "ringing" response was first observed about 20 years ago. This phenomenon is a resonant build up over the time of wave period and this burst-like motion can cause the extreme load on the TLP tether. It is often detected in the large and steep irregular waves but the generation mechanism leading to the "ringing" is not yet well understood. According to the research since then, the higher order harmonic components may account for the "ringing" on the floating offshore structures. The main purpose of the present research is, thus, to measure the higher harmonic forces exerted on a vertical truncated circular column and to compare them with available data. A vertical truncated cylinder with a diameter of 3.5inch and a draft of 10.5inch is used as a test structure, which is a scaled model of ISSC TLP column. The cylinder is installed at a distance of 45ft from the wave maker in order to avoid parasitic waves created in the wave flap. Attached to the upper part of the cylinder are two force gages to measure the horizontal (surge) and vertical (heave) forces on the cylinder. The incoming waves are Stokes waves with a slope ranging from 0.06 to 0.24. The forces and waves are measured for 60 seconds with a sampling rate of 50 Hz. Among the recorded data, the first 10 waves are excluded because of transient behavior of the waves and the next The horizontal and vertical forces are analyzed up to 5th order harmonics. The horizontal forces are then compared to the values from the theoretical model called "FNV model". In addition, force transfer functions are also investigated. Major findings in this research are below. 1) The first order forces measured are slightly larger than the theoretical values of "FNV model" 2) The "FNV model" considerably overpredicts the second order forces. 3) The larger the amplitude and more extreme the wave slope, the smaller the predictions are compared to the experimental. 4) The higher harmonic forces are significantly smaller than the first harmonic force for all wave parameters. 5) The normalized forces vs. waves slopes are almost constant in the lower harmonics but vary a lot in the higher harmonics. 6) The trend of forces is more nonlinear in the horizontal forces than in the vertical forces as the wave slope increases. 7) The part of the results above is also observed by other researchers and confirmed again through the present work.

  • PDF

A Study on Viscous Damping System of a Ship with Anti-Rolling Pendulum (안티롤링 진자를 장치한 선박의 점성감쇠계 해석에 대한 연구)

  • Park, Sok-Chu;Jang, Kwang-Ho;Yi, Geum-Joo
    • Journal of Navigation and Port Research
    • /
    • v.41 no.6
    • /
    • pp.365-372
    • /
    • 2017
  • The rolling motion of a floating body makes crews and passengers exhausted and/or applies forces to the structure to cause damage; it might even upset the body. Therefore, almost all ships are equipped with bilge keels for anti-rolling; in special cases, an anti-rolling tank(ART) or fin stabilizer or gyroscope could be installed. But an ART requires a large capacity to install it, and a fin stabilizer and gyroscope need great costs to install and also many expenses to operate. The authors suggest the use of an anti-rolling pendulum(ARP), and they showed that the ARP is effective to reduce rolling by experiments and via a Runge-Kutta analysis. This paper introduces the linearized 2 degrees of freedom with a viscous damping system for a ship equipped with ARP; it also shows the validation of the linearized analysis for the ship's roll motion. The paper proposes an optimum ARP on the basis of the justified model. The case of the 7.7kg model with ship 20g ARP of a mass ratio of 0.26%, is the most effective for reducing roll motion. The paper shows the ARPs with various mass ratios are effective for reducing the roll motion of a ship by free decaying roll experiments.

Design and Optimization of a Biomass Production System Combined with Wind Power Generation and LED on Marine Environment (LED가 결합된 야간풍력발전 활용을 포함한 해상환경 바이오매스 생산시스템의 최적 설계)

  • Hong, Gi Hoon;Cho, Sunghyun;Kang, Hoon;Park, Jeongpil;Kim, Tae-Ok;Shin, Dongil
    • Journal of the Korean Institute of Gas
    • /
    • v.19 no.2
    • /
    • pp.74-82
    • /
    • 2015
  • Carbon dioxide was designated as one of greenhouse gases that cause global warming. Among various ways to solve the $CO_2$ emission issue, the 3rd-generation biomass (algae) production is considered as a viable method to reduce $CO_2$ in the atmosphere. In this research, we propose a design of an innovative sustainable production system by utilizing the 3rd generation biomass in the environment of floating production storage and offloading (FPSO). Existing biomass production systems depend on the solar energy and they cannot continue producing biomass at night. Electricity produced from offshore wind farms also need an efficient way to store the energy through energy storage system (ESS) or deliver it real-time through power grid, both requiring heavy investment of capital. Thus, we design an offshore grid structure harnessing LED lights to supply the necessary light energy, by using the electricity produced from the wind farm, resulting in the maximized production of biomass and efficient use of wind farm energy. The final design integrates the biomass production system enhanced by LED lights with a wind power generation. The suggested NLP model for the optimal design, implemented in GAMS, would be useful for designing improved offshore biomass production systems combined with the wind farm.

The Effect of the Urban and Architectural Form Factors on Pedestrian Volume (미시공간에서 도시·건축형태요소가 보행량에 미치는 영향)

  • Lee, Gunwon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.10
    • /
    • pp.310-318
    • /
    • 2016
  • This study examined the correlation between microscopic factors and pedestrian volume in an urban environment, focusing on the microscopic factors that stimulate the pedestrian volume, such as density, diversity, network structure, accessibility, and the form of lots and buildings. In particular, factors already known to boost the pedestrian volume include density, diversity and accessibility, which are three variables strongly related to the concept of the 3Ds (Density, Diversity, Design) proposed by Cervero and Kockelman (1997) and the additional 2Ds (Distance to Transit, Destination Accessibility) suggested by Ewing et al. (2008). The analysis in this study was based on the 2010 survey of the floating population in Seoul, particularly on the data from Jongro-gu and Jung-gu in Gangbuk area. Data were established by analyzing the microscopic factors within a 500m radius around each of the 1,028 spots from which the pedestrian volume in Jongro-gu and Jung-gu was measured. The analysis showed that density, diversity and accessibility, three factors that were already known to be effective in increasing pedestrian volume, also have the same effect in Jongro-gu and Jung-gu.

A New Viewpoint Drowned Repetitive Cycle of Flow vs Float Regulating History of Pansory and Floating Possibility of Lost Pansori in Age of Image Media (판소리사를 잠류·부상의 반복 싸이클로 보는 새로운 관점과 영상매체 시대 재매개화를 통한 실전판소리의 부상 가능성 - 실전판소리 <옹고집전>과 영화 <광해>를 통해)

  • Kwon, Do-Kyung
    • Cross-Cultural Studies
    • /
    • v.42
    • /
    • pp.165-203
    • /
    • 2016
  • This study attempted to reconsider the existing viewpoint on the history of Pansori transmission and suggested a new viewpoint on lostPansori transmission. Untill now, lost seven songs have been criticized for failure in Pansory's transmission history because it ceased to satirize negativity of abnormal character without creating a bearer of new value goals in the new age this paper resulted in another conclusion which extends Pansori history's process to modern times in the point of succession and duration of Pansori esthetics. Currently the above reason creats a problem ofcomplete nonmention that confront Pansori's twelve songs which does not apply to lost seven songs. If the evaluation standard of literary history used for lost seven songs is applied to inherited five songs, The inherited five songs also failed in the esthetic cultural history of present times. To resolve this issue, this study suggested a new viewpoint to replace the existing viewpoint that label Pansori's history as a historical structure consisting of success of inherited five songs and failure of lost seven songs repetitive replacement cycle of float and flow. This study provided constructive on lost Pansory of premodern times and presented entire Pansori as a flowing state. This paper futher identified the stages of decline the lost seven songs since the 20thcentury but sets the stage or finding a new qualitative possibility. This new theory was suggested through extant aspects of the movie that was a reproduction of in the present media age.

An Experimental Study on the Performance of Expandable Steel Pipe Pile (확장형 강관말뚝의 성능에 대한 실험적 연구)

  • Kim, Junghoon;Kim, Uiseok;Kim, Jiyoon;Kang, Minkyu;Choi, Hangseok
    • Journal of the Korean GEO-environmental Society
    • /
    • v.23 no.1
    • /
    • pp.39-49
    • /
    • 2022
  • Expandable steel pipe piles are installed by inserting expansion equipment to increase the cross-sectional area of steel pipes, which can improve the pile performance compared to micro-piles. In this paper, a hydraulic expansion device was developed to expand steel pipe piles in practice. A series of laboratory and field tests were conducted to verify the performance of the developed expansion device to expand steel pipes. The expansion capability and expandable range was evaluated by measuring the strain and expansion time at the maximum pressure of the hydraulic expansion device. The thinner steel pipe, the larger strain but longer expansion time required in the test. For example, the 4.0-mm-thick steel pipe showed strain reduction by 30% and a decrease in the required expansion time by 40% compared to the 2.9-mm-thick steel pipe. In addition, in-situ expansion tests were performed to verify the expandability of steel pipes under the ground, and the exhumed specimen showed clear expanded sections. The structural integrity was determined by comparing the material performance the original and expanded specimens.

Development of Expandable Steel Pipe Piles to Improve Bearing Capacity (지지력 향상을 위한 확장형 강관말뚝에 관한 연구)

  • Kim, Uiseok;Kim, Junghoon;Kim, Jiyoon;Min, Byungchan;Choi, Hangseok
    • Journal of the Korean GEO-environmental Society
    • /
    • v.22 no.12
    • /
    • pp.5-13
    • /
    • 2021
  • Expandable steel pipe piles have been developed to ensure stability and reduce construction costs during underground floor remodeling and extension work. Expandable steel pipe piles are more economical and stable than micropiles. Extensible steel pipe pile is a method of improving the performance of steel pipes by expanding steel pipes underground. In this paper, the changes in buckling strength according to the shape of steel pipes in an extended steel pipe pile were identified, a numerical analysis model was developed to determine the expended part effect of bumps due to steel pipe expansion, and the optimal steel pipe expansion was calculated through material tests. The larger the expansion diameter of the steel pipe and the greater the number of expanded part, the greater the buckling strength. Numerical results showed that the number of expanded part has a greater effect on buckling strength than the expansion rate. When the expansion rate is more than 1.2 times, it can be seen that as the number of expanded part increases, the effect of increasing buckling strength increases significantly. It was also noted that the expanded part effect of the bumps occur significantly when the extension angle is less than 45° and the expansion rate is 1.3 times higher. When the steel pipe is failure, the expanded rate is 20 to 32%, averaging 25.4%. Through the material test, it was analyzed that it is desirable to limit the maximum expansion rate for performing steel pipes to 16%.