• 센서학회지
• /
• 제27권6호
• /
• pp.362-367
• /
• 2018

A complementary metal oxide semiconductor (CMOS) binary image sensor is proposed for low-power and low-noise operation. The proposed binary image sensor has the advantages of reduced power consumption and fixed pattern noise (FPN). A gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector is used as the proposed CMOS binary image sensor. The GBT PMOSFET-type photodetector has a floating gate that amplifies the photocurrent generated by incident light. Therefore, the sensitivity of the GBT PMOSFET-type photodetector is higher than that of other photodetectors. The proposed CMOS binary image sensor consists of a pixel array with $394(H){\times}250(V)$ pixels, scanners, bias circuits, and column parallel readout circuits for binary image processing. The proposed CMOS binary image sensor was analyzed by simulation. Using the dynamic comparator, a power consumption reduction of approximately 99.7% was achieved, and this performance was verified by the simulation by comparing the results with those of a two-stage comparator. Also, it was confirmed using simulation that the FPN of the proposed CMOS binary image sensor was successfully reduced by use of the double sampling process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.346-346
• /
• 2010

A capacitorless one transistor dynamic random access memory (1T-DRAM) on silicon-germanium-on-insulator substrate was investigated. SGOI technology can make high effective mobility because of lattice mismatch between the Si channel and the SiGe buffer layer. To evaluate memory characteristics of 1T-DRAM, the floating body effect is generated by impact ionization (II) and gate induced drain leakage (GIDL) current. Compared with use of impact ionization current, the use of GIDL current leads to low power consumption and larger sense margin.

• 대한한의학회지
• /
• 제17권1호
• /
• pp.433-446
• /
• 1996

From September 1990 to December 1994, author had treated by acupuncture for 75 cases of strained headache. The results were as follows. 1. There were some kind of head-ache, posterior head-ache( 32.0 % ), lateral head-ache( 28 % ), whole head-ache( 25.3 % ), floating head-ache(8.0%), upper head-ache( 4.0 % ), front head-ache( 2.7 % ). 2. The causes of head-ache were indistinctness ( 34.7 % ), sensibility ( 53.3 % ), indigestion( 12.9 % ), ect. 3. The combined symptoms were indigestion, constipation, sensibility, hypertention, muscle-ache, ect. 4. There were effects of acupuncture treatment, unavailability (25.3 %), availability (74.7 %). 5. There were availability in according with increasing treatment.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.691-702
• /
• 2017

Clearances are essential for the assemblage of mechanisms to allow the relative motion between the joined bodies. This clearance exists due to machining tolerances, wear, material deformations, and imperfections, and it can worsen the mechanism performance when the precision and smoothly-working are intended. Energy is a subject which is less paid attention in the area of clearance. The effect of the clearance on the energy of a flexible slider-crank mechanism is investigated in this paper. A clearance exists in the joint between the slider and the coupler. The contact force model is based on the Lankarani and Nikravesh model and the friction force is calculated using the modified Coulomb's friction law. The hysteresis damping which has been included in the contact force model dissipates energy in clearance joints. The other source for the energy loss is the friction between the journal and the bearing. Initial configuration and crank angular velocity are changed to see their effects on the energy of the system. Energy diagrams are plotted for different coefficients of friction to see its influence. Finally, considering the coupler as a flexible body, the effect of flexibility on the energy of the system is investigated.

• Fisheries and Aquatic Sciences
• /
• 제19권5호
• /
• pp.23.1-23.7
• /
• 2016

The effects of daily feeding frequency (Exp I), water temperature (Exp II), and stocking density (Exp III) on the growth of river puffer, Takifugu obscurus, juvenile fish of 10 and 40 g in body weight were examined to develop effective techniques to produce river puffer in a non-exchange water system. In Exp I, fish were fed commercial floating feed with 45 % protein one to five times per day to apparent satiation each by hand daily for 8 weeks at $25^{\circ}C$. In both the 10- and 40-g size groups, the final body weight, daily feed consumption, and weight gain of fish fed one meal per day were significantly lower than those of fish fed five meals per day (P < 0.05). However, there were no significant differences in the final body weight, daily feed consumption, and weight gain among fish fed two, three, and five meals per day. Feed efficiency showed decreasing tendency with increasing size of fish. In Exp II, fish of 10 and 40 g in initial body weight were reared with the commercial feed at $15-30^{\circ}C$ for 8 weeks. The weight gain of fish increased with raising water temperature up to $25^{\circ}C$ and decreased drastically at $30^{\circ}C$ for both sizes. The Q10 of specific growth rate was decreased with raising water temperature from 5.04 (temperature interval, $15-20^{\circ}C$) to 0.66 ($25-30^{\circ}C$) for the 10-g fish and from 4.98 to 0.31 for the 40-g fish. In Exp III, the effect of stocking density on growth was examined with fish of 10 and 40 g in initial body weight. The final body weight for initial stocking densities of 4, 8, and $12kg/m^3$ was significantly higher than that of $20kg/m^3$ for the 10-g fish, and the final stocking density reached 10.1, 19.2, 28.7, and $39.9kg/m^3$, respectively. For the 40-g fish, the final body weight for initial stocking densities of 3 and $6kg/m^3$ was significantly higher than that of 9 and $15kg/m^3$ and the final stocking density reached 7.38, 13.5, 17.1, and $27.5kg/m^3$, respectively (P < 0.05). In both groups, weight gain tended to decrease with increasing stocking density; however, survival showed no significant difference.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.15-24
• /
• 2009

The results of a simulation study of variable liquid column oscillations in U-tanks with a novel control scheme are presented. The configuration under investigation is analogous to that of the tuned liquid-column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. However, by virtue of an adequate controller, the response of amplitude of the U-tanks becomes larger in a desired frequency range. The motion of wave energy conversion system equipped with a variable liquid column oscillator is described by a series of nonlinear differential equations. The equations describe the motion of body under ocean wave excitation, and the motion of liquid with an air-spring effect caused by the compression and expansion of air in vertical liquid columns and air chambers. It is shown that the effect of the air-spring has a vital role to maintain the natural frequency of oscillation in the system to synchronize with the frequency of the ocean wave, thus the system provides the most effective mode for energy extraction from the ocean.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.217-224
• /
• 2014

We have developed the novel device that can extract energy from ocean waves utilizing the heaving motion of a floating mass. The major components of the energy converter are: a floater, a counterweight, a cable, a driving pulley, two idler pulleys, a ratchet, and a generator. The device generates power through the tension force in the cable and the weight difference between the floater and the counterweight. When the system is at static free condition, the tension in the cable is equal to the weight of the counterweight which is minimum. Therefore it is desirable to keep the counterweight lighter than the floater. However, experiments show that during the rise of the water level, the torque generated by weight of the counterweight is insufficient to rotate the driving pulley which causes the cable on the floater side to slack. The proposed application of the tension pulley rectifies these problems by preventing the cable from becoming slack when the water level rises. In this paper, the dynamics model is modified to incorporate the dynamics of the tension pulley. This has been achieved by first writing the dynamical equations for the tension pulley and the energy converter separately and combining them later. This paper investigates numerically the effect of the tension pulley on various physical quantities such as the cable tension, the floater displacement, and the floater velocity. Results obtained indicate that this application is successful in suppressing large fluctuations of the cable tension.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.98-111
• /
• 1993

2차원 비정상 비선형 자유표면파를 해석하고 자유표면파에서의 점성효과를 관찰하였다. 유동장내의 Navier-Stokes 방정식과 연속방정식을 풀기 위해 유한해석법을 적용하였고, 자유표면의 처리를 위해 MAC 기법을 적용하였다. 그리고, 자유표면에서는 표면장력을 고려한 경계조건을 적용하였으며, 층류에 대한 점성효과만을 고려하였다. 계산모델은 천수역에서의 점성영향, 자유표면 근처에서의 보오텍스 쌍(vortex-pair)의 거동 및 전진하는 부유체 앞에서의 자유표면파문제 등이다. 천수역문제에서는 바닥과의 마찰에 기인한 자유표면파의 변화를 고찰하였으며, 특히 고립파에 대한 적용으로서 파고의 감소정도, 수직벽면에서의 파상승(wave run-up) 및 수심의 변화로 인한 유장변화 등을 살펴보았다. 보오텍스 문제에서는 보오텍스의 이동에 따른 자유표면주위의 유동변화를 관찰하였으며, 사각부유체 주위의 유동문제에서는 전진속도의 차이에 따른 자유표면파의 차이 및 물체주위의 유동특성을 관찰하였다.

• 한국수산과학회지
• /
• 제31권2호
• /
• pp.202-209
• /
• 1998

본 연구에서는 부유식 해상관측시설의 파랑중 운동응답 및 표류력 해석을 위해 Green 적분방정식에 기초한 3차원 수치해법을 개발하였다. 본 방법에서는 소오스분포와 더브렛분포를 함께 사용하였으며, 판요소로는 3각형 요소와 4각형 요소를 병행 사용하였다. 불규칙파수 현상을 제거하기 위해 개량된 적분방정식 해법을 적용하였으며, 시간평균 표류력의 계산은 원인별 성분파악이 가능한 물체표면 직접적분법을 사용하였다. 개발된 전산 프로그램의 검증을 위해 비교자료가 있는 구형 부유체에 대한 계산이 수행되었고, 이에 대한 계산을 통해 개발된 프로그램으로부터 신뢰성있는 결과를 얻을 수 있음을 확인하였다. 실제시설에 대한 적용예로서 직경 2.6m 흘수 3.77m인 원통형 해상관측용 부이에 대한 계산을 수행하여 그 운동특성 및 표류력 특성을 고찰하였다. 운동응답 해석결과는 공진주파수를 설치해역의 파랑 탁월주파수 범위밖에 놓이도록 부이의 형상과 치수를 조정하는데 활용할 수 있고, 또 이들 계산을 통해 댐퍼 등의 설치효과도 미리 예측할 수 있다. 또한, 계산된 표류력은 황천중에서 계류계에 걸리는 최대하중을 예측하는데 이용할 수 있으므로 계류계의 설계에 있어 중요한 기초자료로 활용된다. 본 수치해법은 원칙적으로 대상 부유체의 형상에 제약을 받지 않으므로 향후 다양한 형상의 부유식 해상관측 시설들의 설계 및 설치$\cdot$운용에 폭 넓게 적용할 수 있다.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.53-60
• /
• 2009

Recently, since there are several problems in space, the infra-structure and the facilities in the contiguity of the existing harbors due to the trend of enlarging the container capacity of the large container vessel, a special floating platform named as the Mobile Harbor has been proposed conceptually as an effective solution of those problems. Two kinds of hull shapes, a conventional mono-hull type and a catamaran type, are proposed as midway feeders to transfer containers to the harbor on land from a large container ship on near shore. In this study, the motion response and mooring analysis are carried out for comparing the global performance of two types of Mobile Harbor. Robot arm mooring facility specially is devised and newly tried to use for the safe fixation of a large container ship and the Mobile Harbor on near shore. It would be expected for this comparison study to give a guideline to design the efficient hull form for a midway loader.