• 한국해안해양공학회지
• /
• 제17권3호
• /
• pp.138-148
• /
• 2005

부유체 및 부유식 교량과 같은 부유식 구조물이 파랑하중에 대하여 나타내는 동적거동을 주파수영역에서 구하는 연구를 수행하였다. 먼저, 부분적으로 유체에 잠겨 파랑하중의 작용을 받는 부유체에 대하여, 이의 강체운동과 관련된 동유체력계수인 부가질량, 감쇠 및 파강제력를 선형포텐셜이론과 경계요소법을 이용하여 주파수 영역에서 산정한다 다음으로,부유식 교량과 같이 앞에서 구한 부유체로 지지되며 유한요소를 이용하여 모델링 되는 부유식 구조물에 대하여, o)의 동적거동에 관한 운동방정식을 수립한다. 동유체력계수들이 주파수 의존적 성질을 가지므로 해석은 주파수영역에서 수행한다. 적용 예제로서 반구와 같은 부유체를 이용하여 해석결과를 문헌과 비교 검증한 후,부유식 교량을 지지하는 폰툰형 부유체에 대한 동유체력계수들을 구하고, 이를 이용하여 설계 파랑하중을 받는 부유식 교량의 동적 거동해석을 수행한다. 해석 예제를 주파수영역에서 해석한 결과 입사파스펙트림의 피크 주파수와 교량의 고유진동수가 가까워 응답이 증폭될 소지가 있었으나 주파수 의존적인 파강제력의 피크가 벗어난 영향으로 응답이 증폭되지 않음을 알 수 있다.

• 한국항만경제학회지
• /
• 제37권3호
• /
• pp.105-116
• /
• 2021

항만부잔교는 조석 간만의 차가 심한 곳에서 조위에 관계없이 선박이 접안할 수 있도록 부유식 함체를 1개 혹은 여러 개 연결하여 부두 기능을 갖도록 한 구조물이다. 국내 항만부잔교는 233개가 설치되어 있고, 30년 이상 경과된 부잔교는 27.5%에 달한다. 30년 이상 경과된 항만부잔교는 잠재적으로 사고의 위험성이 높지만 노후화된 항만부잔교에 대한 명확한 폐기, 매각 등의 처리기준이 없고, 유지점검 및 보수시기 등에 관한 관리규정이 모호한 실정이다. 본 연구에서는 항만별 담당자 인터뷰와 기존 문헌연구를 통해 항만부잔교시설 운영의 문제점과 개선 요인을 분류하여 AHP 모형 설계하였다. AHP 분석결과 상위계층 평가요인의 상대적 중요도는 법제도 개선, 운영관리 개선, 기술적 개선의 순으로 나타났다. 본 연구는 국내 항만부잔교시설 운영 개선을 위한 기초자료로 활용이 가능하다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.941-948
• /
• 2006

In this paper, the effect of stiffness on hydroelastic responses of plate-like floating structure under wave loads are studied. Direct method is used for the numerical analysis. In the numerical analysis, structural equation is formulated by finite element method(FEM) and higher order boundary element method(HOBEM) is employed for the analysis of fluid flow. A 1000m-long VLFS(Very Large Floating Structure) is considered in numerical analyses. By analyzing VLFS for various cases of stiffness, the characteristics of hydroelastic responses with the variation of stiffness are investigated.

• 신재생에너지
• /
• 제20권1호
• /
• pp.26-37
• /
• 2024

Renewable energy sources play a key role in achieving carbon neutrality and zero net emissions in the power generation sector. Various efforts have been made to support the deployment of renewable energy, particularly solar photovoltaic and wind power, including policies to internalize the external cost of carbon emissions. In this study, we conducted a financial analysis of a 800 MW floating photovoltaic system and compared it with ground solar power generation. Additionally, we conducted a cost-benefit analysis that included the social cost of carbon. The findings showed that the floating photovoltaic project can meet the profitability target through an appropriately designed internalization of the social cost of carbon.

• 수산해양기술연구
• /
• 제59권4호
• /
• pp.354-361
• /
• 2023

In this study, the AHP (analytic hierarchy process) technique was used to analyze the risk of expected risk factors and fishing possibilities during gillnet fishing within the floating offshore wind farms (floating OWF). For this purpose, the risks that may occur during gillnet fishing within the floating offshore wind farms were defined as collisions, entanglements, and snags. In addition, the risk factors that cause these risks were classified into three upper risk factors and ten sub risk factors, and the three alternatives to gillnet fishing available within the floating OWF were classified and a hierarchy was established. Lastly, a survey was conducted targeting fisheries and marine experts and the response results were analyzed. As a result of the analysis, among the top risk factors, the risk was the greatest when laying fishing gear. The risk of the sub factors for each upper risk was found to be the highest at the berthing (mooring), the final hauling of fishing net, and the laying of the bottom layer net. Based on the alternatives, the average of the integrated risk rankings showed that allowing full navigation/fisheries had the highest risk. As a result of the final ranking analysis of the integrated risk, the overall ranking of allowing navigation/fisheries in areas where bottom layer nets were laid was ranked the first when moving vessels within the floating OWF was analyzed as the lowest integrated risk ranking of the 30th at the ban on navigation/fisheries. Through this, navigation was analyzed to be possible while it was analyzed that the possibility of gillnet fishing within the floating OWF was not high.

• 한국철도학회논문집
• /
• 제17권2호
• /
• pp.100-105
• /
• 2014

해중철도 부근에서 테러나 사고에 의해 수중폭발이 발생하였을 경우, 함체에 치명적인 손상을 가할 수 있으므로, 충분한 강도를 확보해야 한다. 본 연구에서는 설계 목적으로 해중철도 인근에서 수중폭발이 발생한 경우, 경험에 기초한 공식을 이용하여 충격압을 추정하고, 충격압에 의한 해중철도의 응답을 해석할 수 있는 간이 해석 방법을 제안하였다. 해중철도 함체를 탄성 지지된 보로 이상화하고, 초기 최대 충격압이 작용하는 보에 대해 정적 유한요소해석을 실시한 후, 동하중 계수와 조합함으로 최대 변위 및 굽힘 모멘트를 계산한다. 간이해석 결과는 상용 유한요소해석 소프트웨어를 이용한, 시간에 따른 과도응답해석 결과와 비교하여 양호한 일치를 보임을 확인하였다.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.176-184
• /
• 2012

Installing floating structures in a coastal area requires careful observation of the finite-depth effect. In this paper, a Rankine panel method that includes the finite-depth effect is developed in the time domain. The bottom boundary condition is satisfied by directly distributing Rankine panels on the bottom surface. A stepwise analysis is performed for the radiation diffraction problems and consequently freely-floating motion responses over different water depths. The hydrodynamic properties of two test hulls, a Series 60 and a floating barge, are compared to the results from another computation program for validation purposes. The results for both hulls change remarkably as the water depth becomes shallower. The important features of the results are addressed and the effects of a finite depth are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.244-246
• /
• 2006

In this study, we search some parameters well-related to floating-sinking pulse by statistical analysis, because these pulses are frequently used in clinic. Pulse signals were acquired by 3D pulse analyzer and 30 subjects consist of 15 people diagnosed as floating pulse and 15 people diagnosed as sinking pulse by oriental doctors who have over 5 years clinical experience. Then, we made a representative beat template for each subject and, through a peak detection algorithm, we calculated several pulse parameters. To find the parameters related to floating-sinking pulse, we performed statistical testing with 17 parameters through the independence sampling, t-test. As a result, there is the biggest difference between pressure, the maximum pulse pressure, diastolic area(Ad) and float-sink data. (p < .05).

• 전기학회논문지
• /
• 제56권2호
• /
• pp.428-431
• /
• 2007

A floating-point number system is used to represent a wide range of real numbers using finite number of bits. The standard the IEEE adopted in 1987 divides the range of real numbers into intervals of [$2^E,2^{E+1}$), where E is an Integer represented with finite bits, and defines equally spaced equal counts of discrete numbers in each interval. Since the numbers are defined discretely, not only the number representation itself includes errors but in floating-point arithmetic some strange behaviors are observed which cannot be agreed with the real world arithmetic. In this paper errors with floating-point number representation, those with arithmetic operations, and those due to order of arithmetic operations are analyzed theoretically with help of and verification with the results of some MATLAB program executions.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.38-43
• /
• 2013

In order to design a wave energy generating system, a 6-DOF analysis technique is applied to CFD analysis on of a floating body and the behavior is interpreted according to the nature of the incoming waves. A spring constant is adopted to control the motion of multi floating bodies and to calculate the total average power absorption. Three cases of different wavelengths namely 20D, 30D and 40D have been modeled to analyze the total average power absorption. The average power absorption not only varies with the position of the floating body but also varies with wavelength. From the results obtained, it is concluded that the maximum total average power absorption is 9W approximately in wavelength 30D and the minimum total average power absorption is 4.3W approximately in wavelength 40D.