• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권4호
• /
• pp.513-528
• /
• 2013

A floating Oscillating Water Column (OWC) wave energy converter, a Backward Bent Duct Buoy (BBDB), was simulated using a state-of-the-art, two-dimensional, fully-nonlinear Numerical Wave Tank (NWT) technique. The hydrodynamic performance of the floating OWC device was evaluated in the time domain. The acceleration potential method, with a full-updated kernel matrix calculation associated with a mode decomposition scheme, was implemented to obtain accurate estimates of the hydrodynamic force and displacement of a freely floating BBDB. The developed NWT was based on the potential theory and the boundary element method with constant panels on the boundaries. The mixed Eulerian-Lagrangian (MEL) approach was employed to capture the nonlinear free surfaces inside the chamber that interacted with a pneumatic pressure, induced by the time-varying airflow velocity at the air duct. A special viscous damping was applied to the chamber free surface to represent the viscous energy loss due to the BBDB's shape and motions. The viscous damping coefficient was properly selected using a comparison of the experimental data. The calculated surface elevation, inside and outside the chamber, with a tuned viscous damping correlated reasonably well with the experimental data for various incident wave conditions. The conservation of the total wave energy in the computational domain was confirmed over the entire range of wave frequencies.

• 한국항해항만학회지
• /
• 제26권4호
• /
• pp.441-447
• /
• 2002

전세계적인 인구증가와 산업화로 인하여 육지면적의 부족, 육상자원의 고갈 등의 문제로 해양의 이용 및 개발의 관심이 늘어나고 있으며, 환경친화적인 해양공간을 확보하기 위하여 초대형 부유식 해상구조물에 대한 기술개발이 요구되고 있다. 본 논문에서는 초대형 부유식 구조물의 상부구조물에 대한 시간이력해석법에 대하여 소개하고 파랑하중에 의한 부체변형을 이용한 시간변위이력 산정 방법을 제안한다. 또한 주기 및 진폭의 변화에 따른 상부구조물의 동적 시간이력응답 결과를 분석하고 초대형 부유식 상부구조물 시설계안의 동적구조안전성을 평가한다.

• 해양환경안전학회지
• /
• 제25권1호
• /
• pp.122-129
• /
• 2019

신조 방식의 제조업의 특성상 경기 사이클이 존재하기 때문에, 장기적으로 이를 대처할 동반 산업이 절실하게 필요로 하고 있다. 이러한 요구에 적합한 분야가 수리조선업 분야이다. 수리조선업을 운영하기 위해서는 플로팅도크가 필수적으로 필요로 하며, 대부분 노후화된 플로팅도크를 해외로부터 수입한 후, 개/보수를 통하여 운용하고 있다. 그러나, 사용연한이 최소 30년 이상이고, 운용 시 특정 선급에 입급을 시키지 않기 때문에, 안전성에 대한 정확한 지침은 전무한 상태이다. 본 연구에서는 노후화된 플로팅도크의 계측한 두께 정보를 활용하여, 구조강도 검토를 수행하고, 운용중인 플로팅도크의 잔류 구조강도를 분석하였다. 연구를 통하여 도출된 주요 결과들은 유사 설비의 구조 안전성 검토에 대한 가이드라인을 참조할 수 있으며, 개/보수 시 이러한 방법을 활용하면 빠른 시간 내에 최적 해를 찾을 수 있을 것으로 기대된다.

• Ocean Systems Engineering
• /
• 제10권4호
• /
• pp.399-414
• /
• 2020

A floating bridge is an innovative solution for deep-water and long-distance crossing. This paper presents a curved floating bridge's dynamic behaviors under the wind, wave, and current loads. Since the present curved bridge need not have mooring lines, its deep-water application can be more straightforward than conventional straight floating bridges with mooring lines. We solve the coupled interaction among the bridge girders, pontoons, and columns in the time-domain and to consider various load combinations to evaluate each force's contribution to overall dynamic responses. Discrete pontoons are uniformly spaced, and the pontoon's hydrodynamic coefficients and excitation forces are computed in the frequency domain by using the potential-theory-based 3D diffraction/radiation program. In the successive time-domain simulation, the Cummins equation is used for solving the pontoon's dynamics, and the bridge girders and columns are modeled by the beam theory and finite element formulation. Then, all the components are fully coupled to solve the fully-coupled equation of motion. Subsequently, the wet natural frequencies for various bending modes are identified. Then, the time histories and spectra of the girder's dynamic responses are presented and systematically analyzed. The second-order difference-frequency wave force and slowly-varying wind force may significantly affect the girder's lateral responses through resonance if the bridge's lateral bending stiffness is not sufficient. On the other hand, the first-order wave-frequency forces play a crucial role in the vertical responses.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.307-322
• /
• 2014

With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO). The global Floating LNG (FLNG) market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU) will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

• 한국산업융합학회 논문집
• /
• 제17권4호
• /
• pp.227-233
• /
• 2014

Information presented in this study is intended to inform candidates as they prepare to design and structure the floatovoltaics solar power system. A developed floatovoltaics solar power generation results from the combination of PV plant technology and PV floating technology. This floating-based PV system is a new concept for PV development. The PV floating technology opens new opportunities to give value to unused areas so far while preserving valuable land for more adapted activities. Therefore the land-use conflicts are avoided and the environmental impact is minimized. Therefore the technology offers an interesting opportunity to regions facing on drought during summer time without any negative impact to the eco-system. This study describe the basic components of a floatovoltaics solar power system. A typical system consist of floating system and solar modules, a control device, rechargeable batteries, a load or device and the associated electrical connections. The floating system is specifically designed to keep all metallic components above water leaving only 100% recyclable, closed cell foam filled HDPE plastic floats in contact with the water. As the first case that can maximize the power generation efficiency of PV internationally, it is expected that this study will be utilized as a primary guide for future development of floating type PV system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.479-484
• /
• 2003

A non-contact 6D motion tracking system is proposed. The system consists of two color cameras, a color image grabber and a host computer, Motions of a floating vessel was measured by the constructed system. The instantaneous forces of the floating vessel are analyzed. The floating vessel was put on the water in a small water container in free conditions. The measured forces are reconstructed by the measurement results. The system can be used to non-contact measurements for 6D dynamic analysis of floating vessels.

• 대한임베디드공학회논문지
• /
• 제4권1호
• /
• pp.1-8
• /
• 2009

This paper proposes a 24-bit floating point multiply and accumulate(MAC) unit that can be used in geometry transformation process in 3D graphics. The MAC unit is composed of floating point multiplier and floating point accumulator. When separate multiplier and accumulator are used, matrix calculation, used in the transformation process, can't use continuous accumulation values. In the proposed MAC unit the accumulator can get continuous input from the multiplier and the calculation time is reduced. The MAC unit uses about 4,300 gates and can be operated at 150 MHz frequency.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.37-45
• /
• 2011

The nonlinear free-surface motions interacting with a floating body were investigated using the Moving Particle Semi-implicit (MPS) method proposed by Koshizuka and Oka [6] for incompressible flow. In the numerical method, more realistic Lagrangian moving particles were used for solving the flow field instead of the Eulerian approach with a grid system. Therefore, the convection terms and time derivatives in the Navier-Stokes equation can be calculated more directly, without any numerical diffusion, instabilities, or topological failure. The MPS method was applied to a numerical simulation of predicting the efficiency of floating-type breakwater interacting with waves.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7549-7554
• /
• 2015

본 이 연구의 목적은 부유 기술을 이용하여 제형이 위에 더 오래도록 머무르면서 약물을 지속적으로 방출하는 이중정을 개발하는 것이다. 실험방법으로는 메트포르민을 주 약물로 선정하였는데, 그 이유는 메트포르민은 주로 소장 상부에서만 흡수되는 좁은 흡수 영역 대를 가지고 있는 점, 용해도가 매우 높아 약물 방출을 조절하는 것이 쉽지 않은 점 등 때문이다. 정제의 부유를 위한 가스를 생성하는 부분과 약물의 방출을 조절하는 부분의 간섭을 최소화하기 위해 이중정 타정 기를 사용해 이중정으로 제조하였으며, 정제의 모양, 질량 및 경도를 측정하였고, 부유정의 중요한 요소인 부유 촉발시간과 부유유지 시간을 평가하였다. 또, 약물의 방출 조절을 평가하기 위해 용출시험을 시행하였으며, 그 결과를 시판되고 있는 메트포르민 서방성 제제인 Glucopharge XR$^{(R)}$과 비교평가 하였다. 그 결과, 부유 촉발제인 $NaHCO_3$ 및 약물 방출 조절제인 hydroxypropyl methylcellulose (HPMC)의 사용량에 따라 13초의 부유 촉발시간, 10시간 이상의 부유 유지시간 및 시판 제제와 매우 유사한 약물 방출 거동을 확인할 수 있었다 ($f_2$: 89.6). 결론적으로 메트포르민을 함유한 위 체류 이중정을 성공적으로 개발할 수 있었으며, 그로 인해 메트포르민의 치료효과도 극대화 할 수 있을 것으로 예상된다.