• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1123-1128
• /
• 2006

철도 및 도로교통에 의한 건축구조물의 진동, 소음을 저감시킬 수 없는 PO-MAT(Polyurethane Mat) 제품과 다양한 건축물의 진동, 소음이 전달되는 상황에 적용되어 방진효과를 정확하게 예측하는데 사용될 수 있는 설계안을 개발하였다. 개발된 제품은 다공질의 폴리우레탄 탄성체의 조직으로 도로 및 철도의 교통진동의 방진과 연구실, 기계실, 공조실 등의 Floating Floor System 및 건축기초의 내진용으로 사용되고, 실제구조물에 적용하여 진동저감과 충격흡수, 소음저감 효과가 탁월함을 확인하였다.

• Structural Monitoring and Maintenance
• /
• 제11권2호
• /
• pp.101-126
• /
• 2024

To avoid irregularities in buildings, design codes worldwide have introduced detailed guidelines for their check and rectification. However, the criteria used to define and identify each of the plan and vertical irregularities are specific and may vary between codes of different countries, thus making their implementation difficult. This short communication paper proposes a novel approach for quantifying different types of structural irregularities using a common parameter named as unified identification factor, which is exclusively defined for the columns based on their axial loads and tributary areas. The calculation of the identification factor is demonstrated through the analysis of rectangular and circular reinforced concrete models using ETABS v18.0.2, which are further modified to generate plan irregular (torsional irregularity, cut-out in floor slab and non-parallel lateral force system) and vertical irregular (mass irregularity, vertical geometric irregularity and floating columns) models. The identification factor is calculated for all the columns of a building and the range within which the value lies is identified. The results indicate that the range will be very wide for an irregular building when compared to that with a regular configuration, thus implying a strong correlation of the identification factor with the structural irregularity. Further, the identification factor is compared for different columns within a floor and between floors for each building model. The findings suggest that the value will be abnormally high or low for a column in the vicinity of an irregularity. The proposed factor could thus be used in the preliminary structural design phase, so as to eliminate the complications that might arise due to the geometry of the structure when subjected to lateral loads. The unified approach could also be incorporated in future revisions of codes, as a replacement for the numerous criteria currently used for classifying different types of irregularities.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.54.1-54.3
• /
• 2019

Background: The presence of septa increases the risk of Schneiderian membrane perforation during sinus lift procedure, and therefore, the chance of graft failure increases. We present a safe method of managing septa and, in particular, overcoming small and palatally located septa. Methods: After the elevation of the flap and the creation of a small bony window positioned anterior to the septum, the Schneiderian membrane is lifted carefully. A thin and narrow osteotome is then placed at the indentation created at the base of the septum, and mobilization of the septum is achieved by gentle malleting. The membrane is again carefully lifted up behind the septum. Results: There was one small membrane perforation case in all 16 cases, and none of these patients showed postoperative complications such as implant failure, infection, or maxillary sinusitis. Conclusions: This technique is useful for overcoming the problem of maxillary sinus septa hindering the sinus floor elevation procedure, leading to fewer complications.

• 제어로봇시스템학회논문지
• /
• 제18권1호
• /
• pp.54-61
• /
• 2012

In this paper, the pose estimation method for the satellite GTB (Ground Test Bed) using vision/MEMS IMU (Inertial Measurement Unit) integrated system is presented. The GTB for verifying a satellite system on the ground is similar to the mobile robot having thrusters and a reaction wheel as actuators and floating on the floor by compressed air. The EKF (Extended Kalman Filter) is also used for fusion of MEMS IMU and vision system that consists of a single camera and infrared LEDs that is ceiling landmarks. The fusion filter generally utilizes the position of feature points from the image as measurement. However, this method can cause position error due to the bias of MEMS IMU when the camera image is not obtained if the bias is not properly estimated through the filter. Therefore, it is proposed that the fusion method which uses the position of feature points and the velocity of the camera determined from optical flow of feature points. It is verified by experiments that the performance of the proposed method is robust to the bias of IMU compared to the method that uses only the position of feature points.

• 설비공학논문집
• /
• 제21권1호
• /
• pp.63-70
• /
• 2009

The air sterilization systems are investigated experimentally in this paper. The goal is to reduce bacteria, mold and viruses in office air by using a UV sterilizer installed inside a partition panel and wall-mounted unit. These systems allow occupants to turn the system on/off and to control the incoming air speed and direction. The partition air sterilization system conditions and sterilizes the air, and then delivers the clean air into the personal task area through the partition panels, which are connected to the pressurized under-floor plenum. Room air exits through the return grills mounted on the ceiling. The wall-mounted air sterilization system sterilizes the air, and then delivers the clean air to the personal task area from the wall. In this study a full-size experimental environment is established to investigate the immunization performance of these air sterilization systems. A typical office space scale is used in this study in order to find an optimal system to achieve a sterilized healthy micro-environment. Multiple system parameters, including volume flow rate and velocity of supplied air, were regulated during the experiments. The more air contact these air sterilization systems had, the better disinfection performance. Over 90% of eradication ratios were obtained by these two air sterilization systems. The results indicate that these systems can efficiently disinfect office air contamination.

• 한국주거학회논문집
• /
• 제21권2호
• /
• pp.101-109
• /
• 2010

Various environmental problems due to rapid industrialization and urbanization have worsened to such an extent that they threaten the environmental restitution of the globe and become a critical international issue. Korean government has presented the concept of green growth as a new state vision for the next 60 years and is making efforts to solve these environmental problems. Daegu Metropolitan City has faced various environmental problems including overpopulation of the city, traffic pollution, household waste accumulation and the green zone problem because of the increase of urbanization over the last few decades. As such urbanization continues, the quality of residential environments is rapidly deteriorating and the intensive use of the land leads to an increase of building area, raising the temperatures of cities. There have therefore been demands for healthy, pleasant and satisfying residential environments and for the improvement of existing residential environments, and this demand has been fully recognized by society. Nevertheless, current residential complex developments concentrate only on raising the efficiency of land use. In related laws of the past (Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) an attempt was made to impose a standard to segmentalize the building-to-land ratio, floor area ratio and regulations of number of floors vertically. However, these laws have now been abolished and the regulations are being eased. The purpose of this study was to analyze the characteristics of the floating wind before and after the vertical segmentation of residential areas (Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) by using KLAM_21, a model that enables analysis and prediction of the flow and generation of cold wind. The purpose is also to present a plan to improve the quality of residential areas when developing a building lot and redeveloping housing areas.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.109-112
• /
• 2009

Various environmental problems due to the rapid industralization and urbanization have been worsened as much as to threaten the environmental restitution of globe and become a critical international issue. Korean government presented the green growth as a new state vision for 60 years afterwards and is making efforts to solve the environmental problems. Daegu metropolitan city has faced various environmental problems including overpopulation of cities, traffic pollution, household wastes and green zone problem because of urbanization for the last decades. As such urbanism continues, the quality of residential environment is rapidly deteriorating and the intensive use of land leads to increase of building area raising the temperature of cities. Therefore there have been demands for the healthy, pleasant and satisfying residential environment and the improvement of residential environment and such recognition rises from society in full measure. Nevertheless the current residential complex concentrates only on raising the efficiency of land use. Related laws in the past(Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) tried to prepare a standard to segmentalize the building-to-land ratio, floor area ratio and regulations of number of floors vertically, but currently it is abolished and the regulations are becoming eased. The purpose of this study was to analyze the characteristics of the floating wind before and after the vertical segmentation of residential areas(Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) by using KLAM_21, a model that enables analysing and predicting the flow and generation of clod wind, and to present a plan to improve the quality of residential areas afterwards when developing building lot and re-developing housing areas.

• Ocean and Polar Research
• /
• 제29권3호
• /
• pp.205-216
• /
• 2007

The purpose of this study was to investigate effects of large scale marine sand mining on the marine ecological community. For the study, four stations along the coast were selected and monitored in 1998 and 2001 at mining areas and non-mining areas about the Gyeonggi Bay. The result revealed that in 1998, 9 species of fishes, 16 species of crustaceans, and 6 species of mollusks were collected where as in 2001, 11 species of fishes, 5 species of crustaceans, and 2 species of mollusks were collected, uncovering the fact that fishes have diversified while crustaceans and mollusks have reduced on a grand scale. Also, there were two key characteristics regarding the changes of biological communities in mining and nonmining areas. The first was the dwindling of crustaceans inhabiting the sand area. This outcome may be accounted for by the facts that physical removal of seabed sediments and re-sediment due to expansion of floating particles cause direct influence on the ocean floor ecosystem and have continuous effect on the communities of crustaceans which feed on them. Secondly, the newly arrived species and their population during spring and summer seasons have increased in the non-mining areas and have decreased in the mining area. It can be concluded that highly nomadic fish species migrate toward areas with less disturbance or destruction of ecosystem from marine sand mining, and consequently, the communities of fishes change in the sea area. Setting aside the characteristics of the investigated sea areas where the arriving conditions of species vary by seasons, the clear differences of population of organisms in those areas are due to environmental alterations owing to the marine sand mining ; if those large-scale marine sand mining activities continue in the Gyeonggi Bay, their effects on biological communities in the areas will only grow.

• 한국지반환경공학회 논문집
• /
• 제22권12호
• /
• pp.5-13
• /
• 2021

기존의 뜬구조공법의 문제점을 개선하여 지하층 리모델링, 증축 시 안정성 확보와 공사비 절감이 가능한 공법을 개발하기 위하여 일반적인 마이크로파일에 비해 경제적이고 안정성 높은 확장형 강관말뚝을 개발하였다. 확장형 강관말뚝은 지중에서 강관을 확장하여 강관의 성능을 향상하는 공법으로 본 논문에서는 확장형 강관말뚝의 강관 형상에 따른 좌굴강도의 변화를 파악하고, 수치해석 모델을 개발하여 강관확장으로 인한 요철부의 턱효과를 규명하고, 재료시험을 통하여 최적 강관 확관량을 산정하였다. 강관의 확장 직경이 클수록 확관 턱 개수가 많을수록 좌굴강도가 커짐을 알 수 있었으며, 수치해석 결과에 따르면 확관률보다 확관 턱 개수가 좌굴강도에 큰 영향을 미침을 알 수 있었으며, 확관률는 1.2배 이상일 때, 확관 턱 개수는 증가할수록 좌굴강도 증가 효과가 크게 발생함을 알 수 있었다. 또한, 확장 각도가 45° 이하이고, 확관률이 1.3배 이상일 때 요철부의 턱효과가 크게 발생하는 것을 알 수 있었다. 강관이 파단되는 항복 시, 신율은 20~32%로 평균 25.4% 수준으로 확인되어 그 이상 변형은 강관의 성능을 발휘할 수 없었다. 재료시험을 통해 강관의 성능을 발휘하기 위한 최대 확관량은 항복 시 최저값으로 확인된 신율 20%에 안전측 80%를 고려하여 16%로 제한하는 것이 바람직한 것으로 분석되었다.

• 한국전통조경학회지
• /
• 제34권1호
• /
• pp.71-82
• /
• 2016

문헌고찰과 현지조사를 통해 김천 방초정의 입지, 누정과 지당의 조형성 그리고 누정제영시의 경관의미 등 정원의장적 특질을 추적한 결과는 다음과 같다. 첫째, 방초정이 입지한 원터마을은 금잠낙지형(金簪落地形) 또는 연화부수형(蓮花浮水形)의 풍수형국으로, 방초정은 소통과 교유문화의 거점공간으로 자리 잡아 왔다. 연안이씨(延安李氏)의 본제(本第) 정양공종택(靖襄公宗宅)과 약 150m 이격된 누정형 별서 방초정의 당호 '방초'에는 "향긋한 풀이 무성한, 앵무가 사는 곳을 희구하겠다"라는 군자(君子)의 지조가 새겨져 있다. 둘째, 중앙 온돌방에 사방분합문을 달고 마루를 가설한 누각형 구조의 방초정은 열린 경관을 추구한 적극적 조망의지 뿐 아니라 "가례증해(家禮增解)" 간행 등 공적 용도의 공간성 또한 주목된다. 셋째, '최씨담(崔氏潭)'은 현존하는 국내 지당 중 전형적 '방지쌍원도(方池雙圓島)'를 갖는 유일한 정원유구로, 지당 내 공존하는 두 개의 섬은 주종(主從) 간의 의리와 부부애를 형상화한 정원시설일 뿐 아니라, 3개소의 입수구와 감천으로 향한 1개의 출수구는 저류 및 생태적 재처리 등 마을방죽으로서의 기능을 수행하는 최적합화된 정원의장이다. 넷째, "방초정8영(芳草亭八詠)"과 이를 확대 재생산한 "방초정10경(芳草亭十景)"에서는 방초정을 중심으로 김천과 구성면의 자연 및 취락의 목가적 전원경(田園景)이 적극적으로 묘사되고 있다. 방초정 집경시는 사계사시(四季四時)와 기상현상 및 팔방(八方)을 고려한 경물포치를 통해 방초정과 원터마을을 소우주의 중심으로 삼고자 하였다. 이는 지역의 거점 문화공간으로서 방초정별서명승에 대한 경관인식의 현현(顯現)이다.