• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.111-113
• /
• 2015

Floats are used by the parties involved in a construction project. The owner may use float by changing order(s) or by executing risk avoidance plan; the contractor may use it for leveling resources or substituting activities' construction methods to reduce costs. Floats are accepted either just as by-product obtained by critical path method(CPM) scheduling or as asset having significant value. Succinctly, existing studies involved in float value does not consider its' changes on project time domain. It is important to identify float ownership and to quantify its' corresponding values. This paper presents a method that quantifies float value of money that changes over project execution. The method which accurately computes the monetary value of float may contributes to resolve conflicts relative to float ownership and/or delay issues among project participants. It compares the difference between the monetary value of total float - on non-critical path in each and every schedule update. It makes use of critical path method (CPM) and commercial software with which practitioners are already familiar.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.51-51
• /
• 2000

The ambiguity resolution is an essential task for the precise carrier phase differential GPS. In practice, however, there are still many problems in resolving the ambiguity in kinematic mode, especially in the urban areas. The multipath in received signal, the frequent change in visible satellites, and the cyclic slips make the ambiguity resolution very difficult task in real-time operation. In this paper, we consider a differential positioning with the float ambiguity that is free from the integer constraint. The float ambiguity estimation if carried out by the Kalman filter. The float and fixed ambiguities are combined together to determine the position in real-time kinematic mode.

• Ocean and Polar Research
• /
• v.37 no.3
• /
• pp.179-188
• /
• 2015

This study was carried out to determine the optimal number of ARGO floats in the East Sea in order to maximize their applications. The dominant spatio-temporal scale, size of the domain, and the typical float lifetimes in the East Sea were taken into consideration. The mean spatial de-correlation scale of temperature on isobaric surfaces reaches about 60 km. The minimum necessary number of floats is about 82 on average in order to secure independent ARGO profiles with the de-correlation scale. Considering the float lifetimes, about 27 floats per year should be deployed to maintain the 82 ARGO float array every year. To obtain spatially uniform distribution of ARGO float data, mean residence time and dispersion rate (basin area/residence time) of ARGO floats were evaluated in each basin of the East Sea. A faster (slower) dispersion rate requires more (less) ARGO floats to maintain the spatially uniform number of floats. According to the analysis, it is likely that the optimal ratio of the number of floats for each basin is 1:2:4 corresponding to Ulleung Basin:Yamato Basin:Japan Basin. In order to maintain relatively uniform ARGO observing networks, it is necessary to establish a long-term plan for deployment strategy based on float pathways and the dispersion rate parameters estimated by using currently active ARGO float trajectory data as well as reanalysis data.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.133-137
• /
• 2003

Float has been just recognized spare time for disposing of unexpected conditions as by-product of CPM(critical-path-method) calculations, in spite of important method for construction period, taking in material, human supply and cost reducation in construction process management. Also float necessary follow method of contract by ownership problem and effect construct management of use. The purpose of this study was to examine current recognition and application grade of float in construction project. In addition, the study proposes improvement strategies of float application for efficient progress plan and control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2619-2627
• /
• 2012

The electronic float flow pattern system can predict a rate of flow of river by monitoring a location of float in remote with location measurement technology and a variety of communication technology. Now, to analyze the flow pattern of the natural streams, we use the manual floats in many forms. The measurement of a rate of flow using a manual float measures the distance and time of the manual float directly and uses it. It is inefficient for measurement method and exact a rate of flow of river. To overcome this problems, we designed and implemented the electronic float using CDMA, GPS, and RF module. Then, to get the location information and a rate of flow information, we designed and implemented the monitoring system for the electronic float flow pattern. The short life cycle of electronic float using the battery decreases the utility of the electronic float flow pattern system. Then, we design the power saving method to reduce the power of the electronic float in electronic float flow pattern system.

• Journal of the Korean earth science society
• /
• v.26 no.2
• /
• pp.129-136
• /
• 2005

Continued observation of ARGO floats for years(about 4 years) makes the conductivity sensor more vulnerable to fouling by marine life and associated drift in salinity measurements. In this paper, we address this issue by making use of floats deployed in different years. Floats deployed in the East Sea and the Indian Ocean are examined to find out float-to-float match-ups in such a way that an older float pops up simultaneously with a newer deployment (with tolerable space-time difference). A time difference of less than five days and space difference of less than 100km are considered for the match-up data sets. For analysis of the salinity drift under the stable water mass, observations of the floats from deepest water masses have been used. From the cross-check of ARGO floats in the East Sea and the Indian Ocean, it is found that there is a systematic drift in the older float compared to later deployments. All drift results, consistently show negative bias indicating the typical nature of drift from fouled sensors. However, the drift is much less than 0.01, the specified accuracy of ARGO program.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.509-512
• /
• 2003

The Critical Path Method(CPM) is an effective tool used for planning and scheduling. One of strong point in the CPM is what can calculate float. Float is able to prolong without having an effect on overall schedule of project, however concept and scope about ownership is not definite, because it is a by-product of project. Thus participants have had many dispute in using float because of their interests. In recent years, a few theories have evolved in an attempt to solve this problem. But the prior research did not make a reasonable distribution of float because their criteria of distribution was based on ratio for total project time. Actually, an application of float is achieved by participant's delay risk. Therefore. this paper proposes criteria for float distribution using delay risks, and the framework for the assessment of the delay risks.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.3
• /
• pp.26-32
• /
• 2015

The authors are developing a motion of floater body type wave energy converter of the float-counterweight system. This consists of the driving pulley, wire, float and counterweight suspended from idler pulleys and rachet mechanism. Though it has succeeded in solving the major structural strength problem in which the floats would slam against adjacent structure(s) by wave load acting horizontally. In order to overcome this problem. We propose a new system in which the wire transmitting the power is wound around the pulleys and the float receiving the wave power is pulled by the wire from both its upper and lower ends to avoid the occurrence of slackening during the wave cycle. In the paper, we developed the dynamics model for the proposed system. Energy gain has been calculated for realistic wave conditions and compared with the original float-counterweight device. The important differences from the float-counterweight system are that (1) both upward and downward motions of water surface can be utilized without problem. (2) slackening of energy gain and wire tension are effectively suppressed, and (4) for the same time averaged energy gain, the maximum wire tension is fairly lowered.

• Journal of the Korean earth science society
• /
• v.45 no.4
• /
• pp.327-337
• /
• 2024

The ocean is linked to long-term climate variability, but there are very few methods to assess the short-term performance of forecast models. This study analyzes the short-term prediction performance regarding ocean temperature and salinity of the Global Seasonal prediction system version 5 (GloSea5). GloSea5 is a historical climate re-creation (2001-2010) performed on the 1st, 9th, 17th, and 25th of each month. It comprises three ensembles. High-resolution hindcasts from the three ensembles were compared with the Array for Real-Time Geostrophic Oceanography (ARGO) float data for the period 2001-2010. The horizontal position was preprocessed to match the ARGO float data and the vertical layer to the GloSea5 data. The root mean square error (RMSE), Brier Score (BS), and Brier Skill Score (BSS) were calculated for short-term forecast periods with a lead-time of 10 days. The results show that sea surface temperature (SST) has a large RMSE in the western boundary current region in Pacific and Atlantic Oceans and Antarctic Circumpolar Current region, and sea surface salinity (SSS) has significant errors in the tropics with high precipitation, with both variables having the largest errors in the Atlantic. SST and SSS had larger errors during the fall for the NINO3.4 region and during the summer for the East Sea. Computing the BS and BSS for ocean temperature and salinity in the NINO3.4 region revealed that forecast skill decreases with increasing lead-time for SST, but not for SSS. The preprocessing of GloSea5 forecasts to match the ARGO float data applied in this study, and the evaluation methods for forecast models using the BS and BSS, could be applied to evaluate other forecast models and/or variables.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.81-93
• /
• 2007

Achieving a target operational availability is more economical and efficient than having many quantities of the weapon system, since the cost of weapon system becomes expensive. The intent of this study is twofold; first, we develop the simulation model to determine the optimal inventory level of the maintenance float while achieving a target operational availability of the Korean-made helicopter. The quantity decision model considers following factors such as a reliability. a turn around time(TAT). a protection level for inventory, and so on. Second, we analyze whether the existence of a lateral transshipment among bases and the reduction of TAT relate to an inventory level and the operational availability. The research result shows that both TAT and lateral transshipment have an effect on reducing the inventory level of the maintenance float and improving an operational availability.