• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.810-812
• /
• 2008

Previously study on structural design of the main wing of the twenty-seat class WIG(Wing in Ground Effect) craft. In the final design, three spars construction was selected for safety in the critical flight load, and the Carbon-Epoxy material was selected for lightness and structural stability. In this study, the forced vibration analysis was performed on the composite main wing structure of the twenty-seat class WIG craft with two-stroke pusher type reciprocating engine. The vibration analysis based on the finite element method was performed using a commercial FEM code, MSC/NASTRAN. Excitations for the frequency response analysis were assumed as the H-mode(horizontal mode), the V-mode(vertical mode) and the X-mode(twisted mode) which are typical main vibration modes of engine. And excitations for the transient response analysis were assumed as the L-mode(longitudinal mode) with the oscillating propeller thrust which occurs in operation. According to the result of forced vibration analysis, structural design was modified to reduce the vibrations.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.133-140
• /
• 2018

Recently, environmentally friendly aviation propulsion systems have received a lot of attention. Therefore, many studies have been conducted on the development of UAVs and propulsion systems that can perform missions while relying on a combination of various power sources. In this paper, we show the design results of a hybrid propulsion system based on solar-power generation. It integrates a single system to test reliability and performance. Finally, a verification test is conducted on the aircraft to confirm the function and normal operation of the system before a flight test.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.111-116
• /
• 2021

This study aims to identify the representative factors affecting the air trade between the two countries over the past 20 years, targeting China, Korea's largest trading partner for air transport. In the analysis, the two countries' GDP, GDP per capita, and tariff rates, as well as exchange rates, international oil prices, and FTAs were used as variables. For the analysis method, OLS multiple regression analysis was performed, and each was analyzed by dividing the export amount, import amount, and trade amount. As a result of the analysis, China's GDP and Korea's GDP per capita showed a positive (+) direction, an increase in the exchange rate resulted in an increase in the amount of trade, and an increase in the tariff rate resulted in a decrease in the amount of trade. Whether the FTA was concluded or not acted as a factor in increasing the amount of trade between the two countries.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.141-146
• /
• 2019

The aircraft noise analysis area in this study is a training airfield where various kinds of aircraft are operated. It is difficult to identify the noise analysis as a real measurement in a training airfield. In order to overcome these practical limitations and to establish appropriate noise countermeasures, a noise map is prepared using the Integrated Noise Model Version 7.0 of the aircraft noise prediction program used by the FAA. The noise of C90GT aircraft was measured while flying the takeoff route, landing route, and long route. We want to identify areas where noise damage is more than 70 WECPNL. No area exceeding the legal standard of 70 WECPNL was found in all routes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.392-400
• /
• 2019

This paper provides a fin actuation system of missile based on electromagnetic-spring mechanism to miniaturize the system and lower the cost. Compared with proportional electro-mechanical actuators, the output of Electromagnetic-Spring Actuators(EMSA) has two or three discrete states, but the mechanical configuration of EMSA is simple since it does not need power trains like gears. The simple mechanism of EMSA makes it easy to build small size, low cost, and relatively high torque actuators. However, fast response time is required to improve the dynamic performance and accuracy of missiles since bang-off-bang operation of EMSA affects the flight performance of missile. In this paper the development of EMSA including parameter optimization and mathematical modeling is described. The simulation results using Simulink and experimental test results of prototype EMSAs are presented.

• International Journal of Aerospace System Engineering
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2018

This study examines the history of Korean aviation industry and presents the investment strategy based on the evidence and the 4th industrial revolution. Looking at the evolution of the Korean aviation industry and its technological development will be a great help to support industrial and technological innovation in the future. The modern aviation industry is divided into stages of development, focusing on maintenance of equipment introduced in advanced countries, localization through license assembly, production of products based on technology, and international joint development. The development of aeronautics technology has been progressing towards a general improvement of economic efficiency, aircraft safety efficiency through environmental-friendliness, unmanned operation, and downsizing. The Korea Aerospace Research Institute has secured key technologies through development of several aircrafts such as Experimental Aircraft Kachi, EXPO Unmanned Airship, Twin-engine Composite Aircraft, Canard Aircraft, Multi-Purpose Stratosphere unmanned-airship, Medium Aerostats, Smart UAV, Surion, EAV-2H, KC-100, and OPV. The development strategy is discussed at the level of the evidence-based investment strategy that is currently being discussed, and so the investment priorities in aircraft is high. Current drone usage and development direction are not only producing parts using 3D printer, but also autonomous flight, communication (IoT, 5G), information processing (big data, machine learning). Therefore, the aviation industry is expected to lead the fourth industrial revolution.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.886-893
• /
• 2018

U.S. and the allies attacked chemical weapons sites in Syria in 2018, and verbal battles are carried out about the effectiveness of the air strike. Syria claimed 13 missiles were shot down, and Russia claimed 71 missiles were shot down while the U.S. released pictures of completely destroyed targets, only. It led controversy about the effectiveness of missile defense system. If there is a method to observe mission success rate of the air strike, it can not only improve combat awareness but also can be a good sales strategy in military industry. This paper describes effects and considerations of a Weapon Data Link(WDL) technology which can be used as a smoking gun of effectiveness. The paper describes WDL abilities such as In-Flight Track Update, Loiter, and Bomb Hit Indication etc., and presents examples of expected effectiveness of the WDL. In addition, this paper briefly summarizes operational consideration for better performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.525-534
• /
• 2019

Water rocket is a pressurized liquid propellant rocket that shares the same basic principles of space launch vehicles. Water rockets can be used as an engineering educational material for the liquid rocket principles and the launch vehicle systems, far beyond the scope of K-12 level science education. In this paper, the principles and theories of water rocket propulsion and flight dynamics was investigated at the level of undergraduate rocket engineering classes. Also, the system level design and operation of water rocket is summarized by including the components of launch vehicle, launch pad, payload and recovery as well as altitude measurement methods.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.68-73
• /
• 2020

The proportion of airline accidents caused by human factors is steadily increasing. The aviation industry has made considerable progress in reducing the accident rate; however, since the early 1980s, the accident rate has remained constant. Due to airspace congestion, the safety margins of these existing safety promotion methods are gradually decreasing; thus, new methods to prevent accidents and quasi-accidents must be devised. Causative factors of aviation accidents include increased air traffic due to increased air demand, increased cumulative working hours due to long-distance flights, and complicated flight environments. Accidents often occur when several small errors accumulate in the normal course of operation, rather than after a single error. Accordingly, in this study, the impacts on air navigation due to human error by aviation maintenance personnel and varying international standards (i.e., KOCA vs. F.A.A vs. EASA) analyzed, and the relationship between human decision-making and behavior was investigated. The resulting safety analysis and alternatives were presented to prevent aviation maintenance accidents and cognitive ergonomics errors.

• Mass Spectrometry Letters
• /
• v.12 no.2
• /
• pp.47-52
• /
• 2021

Evaluating the impurity concentrations in semiconductor thin films using time of flight secondary ion mass spectrometry (ToF-SIMS) is an effective technique. The mass interference between isotopes and matrix element in data interpretation makes the process complex. In this study, we have investigated the doping concentration of phosphorus in, phosphorus doped silicon thin film on glass using ToF-SIMS in the dynamic mode of operation. To overcome the mass interference between phosphorus and silicon isotopes, the quantitative analysis of counts to concentration conversion was done following two routes, standard relative sensitivity factor (RSF) and SIMetric software estimation. Phosphorus doped silicon thin film of 180 nm was grown on glass substrate using hot wire chemical vapor deposition technique for possible applications in optoelectronic devices. Using ToF-SIMS, the phosphorus-31 isotopes were detected in the range of 10¹~10⁴ counts. The silicon isotopes matrix element was measured from p-type silicon wafer from a separate measurement to avoid mass interference. For the both procedures, the phosphorus concentration versus depth profiles were plotted which agree with a percent difference of about 3% at 100 nm depth. The concentration of phosphorus in silicon was determined in the range of 10¹⁹~10²¹ atoms/cm³. The technique will be useful for estimating distributions of various dopants in the silicon thin film grown on glass using ToF-SIMS overcoming the mass interference between isotopes.