• 한국항공우주학회지
• /
• 제49권12호
• /
• pp.989-996
• /
• 2021

배터리를 동력원으로 사용하는 무인항공기의 경우 배터리 용량이 한정적이기 때문에 임무 수행에 제약이 발생할 수 있다. 이를 최소화하기 위해 임무 지역으로 이동하는 동안 소모되는 배터리를 최소화 하는 것이 중요하다. 또한 임무 계획 단계에서 배터리 소모량 예측 모델을 이용하여 임무 수행 가능성을 사전에 판단할 수 있으며 복귀 시점 선정에 기준이 될 수 있다. 본 논문에서는 3차원 공간에서 환경 요소를 반영한 배터리 사용량 예측 모델을 제안한다. 무인항공기의 비행 기하 관계에 따라 요구 동력을 산출하고 이를 통해 배터리 사용량을 예측하였으며 기존에 제안된 배터리 사용량 예측 기법과 비교를 통해 검증한다. 또한 이를 목적함수로 하여 배터리 사용량을 최소화 하는 비행경로를 생성하고 최단 거리를 목적함수로 하였을 때의 결과와 비교하였다.

• 한국시뮬레이션학회논문지
• /
• 제27권2호
• /
• pp.35-48
• /
• 2018

북한의 전술탄도미사일(TBM, tactical ballistic missile)에 대한 방공 분야 연구는 빠른 속도로 변화하는 전장 환경을 고려해야 한다. 아군 유도탄의 표적 재지정 연구는 동적인 전장에 대한 대응뿐만 아니라 아군 방어 자산의 효과적인 운용을 가능하게 한다. 현재까지 진행된 연구는 의사 결정 과정에서 중요한 역할을 하는 TBM의 명중 확률이 고정된 값이기 때문에 실시간 전장 상황을 대변하지 못한다. 따라서 본 연구는 실시간 전장 환경을 고려한 명중 확률을 기반으로 의사 결정을 내리는 표적 재지정 알고리즘을 제안한다. 제안 방법론은 랜덤 포레스트와 무빙윈도우(moving window) 기법을 사용하여 현재 TBM의 위치 및 속도 정보로 TBM의 예상 궤적을 예측하는 궤적 예측 모형을 포함한다. 예상 명중 확률은 궤적 예측 모형과 유도탄의 시뮬레이터를 통해서 계산할 수 있으며, 계산된 명중 확률은 유도탄에 대한 표적 재지정 알고리즘의 의사결정 기준이 된다. 실험에서는 TBM 궤적 예측 모형에 사용한 방법론의 타당성이 검증되었으며, 표적 재지정 의사 결정 과정에서 제안된 모델을 통해 명중 확률을 사용하는 것의 우수성이 확인되었다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2016년도 하계학술대회
• /
• pp.329-331
• /
• 2016

일반적으로, 비행 표적의 궤적을 예측하기 위해 회귀분석이 사용되어왔다. 그러나 이 방법은 표적이 매우 다이내믹한 움직임을 보일 경우에는 오차가 크다는 한계가 있다. 이러한 문제를 해결하기 위해 본 논문에서는 다양한 수식을 생산해 내는 유전자 알고리즘을 이용하여 비행 표적의 다음 궤적을 예측해 내는 방법을 제안한다. 유전자 알고리즘을 통해 생산된 예측식을 토대로 비행 표적의 궤적을 3D 형태로 시각화 하였으며, 실제 관측 데이터와 예측된 데이터의 오차를 통해 정확도를 검증하였다.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.5-13
• /
• 2007

The trajectory of an current artillery munition is subject to a variety of different error sources resulting in more or less big deviation from the nominal predicted flight path. The 1D CCM(Course Correction Munition) has appeared to solve this problem and the mechanism of 1D CCM is a simple and low cost one using the influence of drag to range behavior of an artillery munition. In the paper 1D CCM concept has been simulated using wind tunnel experiment results of the specified Korean munition with CCF(Course Correction Fuze) and calculated the performance of its rang error reduction. From the simulated results it can be numerically explained that the possibility of adaptation of 1D CCM concept to Korean artillery munitions.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.36-41
• /
• 2011

Numerical simulation of air-launched rockets from a helicopter was conducted to investigate the aerodynamic interference between air-launched rocket and helicopter. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between rocket and rocket launcher. The flow solver was coupled with six degree-of-freedom equation to predict the trajectory of free-flight rockets. For the validation, calculations were made for the impinging jet with inclined plate. The rotor downwash of helicopter was calculated and applied to simulation of air-launched rocket. It is shown that the rotor downwash has non-negligible effect on the air-launched rocket and its plume development.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.767-779
• /
• 2017

Automated mission planning for unmanned aerial vehicles (UAVs) is difficult because of the propagation of several sources of error into the solution, as for any large scale autonomous system. To ensure reliable system performance, we quantify all sources of error and their propagation through a mission planner for operation of UAVs in an obstacle rich environment we developed in prior work. In this sequel to that work, we show that the mission planner developed before can be made robust to errors arising from the mapping, sensing, actuation, and environmental disturbances through creating systematic buffers around obstacles using the calculations of uncertainty propagation. This robustness makes the mission planner truly autonomous and scalable to many UAVs without human intervention. We illustrate with simulation results for trajectory generation of multiple UAVs in a surveillance problem in an urban environment while optimizing for either maximal flight time or minimal fuel consumption. Our solution methods are suitable for any well-mapped region, and the final collision free paths are obtained through offline sub-optimal solution of an mTSP (multiple traveling salesman problem).

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.763-768
• /
• 2002

This paper presents a mathematical model predicting the temperature distribution in rotating GMA welding. The bead width increases with rotation frequency at the same rotation diameter because the molten droplets are deflected by centrifugal force. The numerical solution is obtained by solving the transient three-dimensional heat conduction equation considering the heat input from the welding arc, cathode heating and molten droplets. Generally in GMA welding the heat input may be assumed as a normally distributed source, but the droplet deflection causes some changes in the heat input distribution. To estimate the heat flux distribution due to the molten droplet, the contact point where the droplet is transferred on the weld pool surface is calculated from the flight trajectory of the droplets under the arc plasma velocity field obtained from the arc plasma analysis. The numerical analysis shows a tendency of broadened bead width and shallow penetration depth with the increase of rotating frequency. The simulation results are in good agreement with those obtained by the experiments under various welding conditions.

• ETRI Journal
• /
• 제27권2호
• /
• pp.172-180
• /
• 2005

Image resampling according to epipolar geometry is an important prerequisite for a variety of photogrammetric tasks. Established procedures for resampling frame images according to epipolar geometry are not suitable for scenes captured by line cameras. In this paper, the mathematical model describing epipolar lines in scenes captured by line cameras moving with constant velocity and attitude is established and analyzed. The choice of this trajectory is motivated by the fact that many line cameras can be assumed to follow such a flight path during the short duration of a scene capture (especially when considering space-borne imaging platforms). Experimental results from synthetic along-track and across-track stereo-scenes are presented. For these scenes, the deviations of the resulting epipolar lines from straightness, as the camera's angular field of view decreases, are quantified and presented.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.272-281
• /
• 2009

In this paper, three-dimensional optimal evasive maneuver patterns for air-to-surface attack missiles against proportionally navigated anti-air defense missiles were investigated. An interception error of the defense missile is produced by an evasive maneuver of the attack missile. It is assumed that the defense missiles are continuously launched during the flight of attack missile. The performance index to be minimized is then defined as the negative square integral of the interception errors. The direct parameter optimization technique based on SQP and a co-evolution method based on the augmented Lagrangian formulation are adopted to get the attack missile's optimal evasive maneuver patterns. The overall shape of the resultant optimal evasive maneuver is represented as a deformed barrel-roll.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.89-92
• /
• 2006

Aerodynamic heating temperature shown in a NASA's sounding rocket test data was reproduced with CFD technique, comparing with those with analytical method CFD made heat transfer rates and recovery temperatures as the flight trajectory, which made it possible to calculate the wall temperature of rocket. The predicted wall temperature was compared with analytically predicted temperatures. Both the temperatures were compatible although their recovery temperature and heat transfer rates are a little different.