• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.490-497
• /
• 2017

The Main Landing Gear(MLG) of Rotary Wing Aircraft is an essential equipment in Landing System for pilot to perform a flight mission. It supports the fuselage at ground and absorbs the impact from the ground when landing, thereby, these functions sustain operational capability for pilot and crew. However, the A aircraft caused asymmetry and leakage hydraulic when it was stationed on the ground. Therefore, this paper summarizes pilot comments in operation which are classified by cause of occurrence and the troubleshooting process about each comment. It also describes design improvements which was derived from troubleshooting and suggests verification results of flight test.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.94-98
• /
• 2013

A report of security problems and simultaneous operation limits of Standard tone currently used for FTS introduces the development of a next generation FTS. In this paper, BER performance by modulations and channel coding methods for EFTS are compared. Simulation results show that coherent modulations have better BER performance than noncoherent modulations. However the environments of a lunching vehicle may cause serious problems in achieving and maintaining synchronization and the increasing complexity of coherent systems also increases reliability problems. Therefore noncoherent systems are suitable for FTS even though BER performace of noncoherent systems is lower than coherent systems. Noncoherent DPSK has better BER performance than noncoherent CPFSK. However the PEP of noncoherent DPSK is 0.8dB higher than noncoherent CPFSK. Therefore a transmitter of noncoherent DPSK has more output power than noncoherent CPFSK. Convoltional code has better BER performance than RS code. However RS code has a tendency of steeply decreasing BER near the wanted $E_b/N_0$.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.225-232
• /
• 2011

We have designed and manufactured the Earth observation camera (EOC) of multi-purpose infrared imaging system (MIRIS). MIRIS is a main payload of the STSAT-3, which will be launched in late 2012. The main objective of the EOC is to test the operation of Korean IR technology in space, so we have designed the optical and mechanical system of the EOC to fit the IR detector system. We have assembled the flight model (FM) of EOC and performed environment tests successfully. The EOC is now ready to be integrated into the satellite system waiting for operation in space, as planned.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.4
• /
• pp.100-108
• /
• 2013

In aerospace industry, MTBF (Mean Time Between Failure) and MFTBF (Mean Flight Time Between Failure) are generally used for reliability analysis. So far, especially to Korean military aircraft, MFTBF of avionic equipments is predicted by MIL-HDBK-217 and MIL-HDBK-338, however, the predicted MFTBF by military standard has a wide discrepancy to that of real-world operation, which leads to overstock and increase operation cost. This study analyzes operational data of avionic equipments. Operational MFTBF, which is calculated from operational data, is compared with predicted MFTBF calculated conventionally by military standard. In addition, failure rate trend is investigated to verify reliability growth in operational data, the investigation shows that failure rate curve from operational data has somewhat pattern with decreased failure rate and constant failure rate.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.9
• /
• pp.707-714
• /
• 2016

This paper describes analysis results of vibration characteristics and modal test for a small-scale quad-rotor drone. The rotor arm has a slender body with a propeller and motor at its tip. Rotor system generates excitation for an unbalanced mass. Therefore, the drone platform is involved in the possibility of resonance. For advance identification of the possibility of resonance, confirmation of eigen-mode being closest to the propeller operation range is necessary. Material properties of CFRP tubes used for the rotor arm were acquired by finding the natural frequency based on Rayleigh method. A simplified quad-rotor FE model consisting of rotor arm assembly with tip mass was built to perform numerical analysis, and a free-free boundary condition was applied to provide flight status. Modal tests for the actual platform with impact hammer instrument were performed to verify analysis results. Separation margin from hazardous eigen-mode was checked on the propeller operation range.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.5 no.1
• /
• pp.65-79
• /
• 1997

In this study, we deviced side warning system that is necessary to the ground operation of aircraft. The system consist of obstacle detection part, transmission part, receive part, and warning part. We used TOF(Time Of Flight) method using 40kHz ultrasonic wave as the obstacle detection part. The 447MHz RF module was applied to the transmission and receive part. The warning part is activated by the computer using received distance data. The detection system attach to the left/right side edge of main wing and horizontal stabilizer. We have decided 10m obstacle detection range. The result of experiment was satisfactory.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.44-54
• /
• 2014

This paper suggests two kinds of reaction control system command generation methods for upper stage attitude control of launch vehicles. The reaction control system is assumed to consist of two sets of three nozzles. One operation technology is based on mixed attitude error functions, and the other is based on command mixing functions. Both are compared via simulations. The simulation results show that the latter is comparatively preferable in terms of interference among control axes, independency of controller design and analysis among axes, and prediction of flight performance of each control axis.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.29-32
• /
• 2016

본 논문에서는 나로호(KSLV-I) 비행상태의 실시간 감시를 목적으로 국내에서는 처음 개발된 우주센터 원격수신자료전시시스템(EDS)의 구축과 운용을 소개한다. EDS는 우주센터 발사통제시스템의 주요 시스템 중 하나이고 그 역할은 위성발사체의 비행에 중대한 영향을 주는 주요정보(QLM)와 궤적정보(TSPI)를 수신하여 실시간으로 처리함으로써 탑재 서브시스템별 전문가들이 위성발사체의 비행 상태를 감시할 수 있도록 지원하는 것이다. EDS는 3회에 걸친 나로호 비행시험에서 그 역할에 따라 매회 8대가 운영되었으며 임무를 성공적으로 수행하였다. 본 시스템을 기반으로 추후 발전된 형태의 한국형발사체(KSLV-II) 비행상태의 실시간 감시시스템의 구축이 가능할 것으로 예상된다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.108-113
• /
• 2014

Recently increase in the number of aircraft caused the air traffic congestion and flight delays. If timely action to reform the air traffic system is not taken, these may result in added economic impact. As a result, the air traffic management should be changed in an innovative manner to modernize the existing air traffic control environment. This paper reviews the trends of airspace reforms such as integration of terminal control areas and flexible use of airspace introduced by foreign countries and compares their merits and demerits in order to provide a judgement to adopt the concept in domestic airspace in the future.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.187-194
• /
• 2017

ICAO Universal Safety Oversight Audit Programme is a comprehensive evaluation for aviation safety matters, including aircraft operation, licensing and aircraft incident/accident investigation. As this programme is measures aviation safety level of States, there is a need to meet international standards, especially in the field of aircraft incident/accident investigation. This research discusses points required to satisfy international standards, which are independence and autonomy of an accident investigation board, the lack of the enough number of investigators and efficient management of those personnel, the effective composition and use of an investigation report, an accident investigation itself to build big data and the creation of a cooperation system among States. This paper suggests various opinions in order to enhance aviation safety especially through aircraft accident investigations, using case studies from the US, UK and Japan.