• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.142-147
• /
• 2004

It is very difficult to acquire high-fidelity flight test data for small airplanes such as typical unmanned aerial vehicles because MEMS-type small sensors used in the tests do not present reliable data in general. Besides, it is not practical to conduct expensive flight tests for low-cost small airplanes in order to simulate their flight characteristics. A practical approach to obtain acceptable flight data, including stability and control derivatives and data of weight and balance, is proposed in this study. Aircraft design software such as Darcorp's AAA is used to generate aerodynamic data for small airplanes, and moments of inertia are calculated using CATIA, structural design software. These flight data from simulation software are evaluated subjectively and tailored using simulation flight by experienced pilots, based on the certified procedures in FAA AC 120-45A and 40B, which are used for manned airplane simulators.

• 대한임베디드공학회논문지
• /
• 제7권3호
• /
• pp.157-162
• /
• 2012

In this paper, we propose a flight data storing system for effective data processing. Since the flight data contains critical information and their sizes are vast, encryption and compression would be needed to manage the flight data in effect. And we implemented the flight data storing system using an embedded board with DSP based on DPCM compression and AES encryption. Especially, we applied the reordering technique to advance the security function. From the simulations for two type data of voice and avionics, we found the developed system is well performed.

• 항공우주시스템공학회지
• /
• 제1권3호
• /
• pp.37-42
• /
• 2007

The flight safety system for the satellite launch vehicles is required in order to minimize the risk due to launch vehicle failure. For prompt and reliable decision of flight termination, the flight safety system usually uses multiple sensors to estimate launch vehicle's flight trajectory. In that case, multiple types of observed tracking data makes it difficult to identify the flight termination condition. Therefore, a fusion tracking filter handling the multiple tracking data is necessary for the flight safety system. This research developed a simulation software for generating multiple types of launch vehicle tracking data, and then processed the data with fusion filters.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.21-29
• /
• 2010

The main purpose of this study is to obtain linear models for the design of automatic flight controller in order to operate the Light Sport Aircraft as unmanned air vehicle. Flight test equipments installed on the aircraft to acquire flight test data are described and maneuvers for practical speed calibration are introduced. Parameters for the linear models of lateral and longitudinal motion are estimated by the Output error method as well as trim data analysis using the flight test data. Simulated data using the estimated parameters is shown to agree well with the measurement data. Estimated parameters obtained for several flight conditions can be used to improve the aerodynamic database of the simulation program.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.56.6-56
• /
• 2001

The FDAS(Flight Data Analysis & Animation System) is a comprehensive analysis system designed for the improvement of flight safety. FDAS provides decoding, analysis and animation tools that can be used for investigation of data origination primarily from Flight Data Recoders(FDRs), Quick Access Recoders(QARs), Using FOQA(Flight Operation Quality Assurance) Data Analysis, an analyst can perform a variety of functions including data smoothing, interpolation, differentiation, integration, calculator function, flight path generation, performance routines, as well as user-programmed functions. Utilizing data captured and processed by our FDAS software module, FDAS provides high-fidelity 3-D aircraft views and instruments views. Multiple windows enable you to view the situation from a variety of perspectives, including out-of-window, chase plane ...

• 한국항공우주학회지
• /
• 제42권3호
• /
• pp.263-269
• /
• 2014

비행시험 자료 가시화 기능은 비행시험 이후 비행체의 시험 절차 및 현상을 이해하는데 많은 도움이 된다. FlyingView는 비행시험 자료를 활용하여 3차원 가상환경 기반으로 비행체의 비행화면을 전시할 수 있으며, 동시에 자료 분석을 위한 X-Y 그래프를 전시할 수 있도록 개발되었다. 본 프로그램은 국방과학연구소의 공대지 무장 비행시험에 적용하여 활용하였다. 본 논문에서는 FlyingView의 기능과 향후 개발계획에 대해서 기술하고 있다.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.42-49
• /
• 2021

To develop a high-resolution electro-optical/infrared (EO/IR) payload to be mounted on a high-speed and performance fighter aircraft in an external POD for acquiring daytime and nighttime image information on tactical targets, simulations, including flight environments and maneuvers, should be performed. Such simulations are pertinent to predicting the performance of several variables, such as aerodynamic force and inertia load acting on the payload. This paper describes the development of a flight data acquisition and analysis system based on flight simulation software (SW) for mission simulation of super-maneuverability fighter equipped with EO/IR payload. The effectiveness of the system is verified through comparison with actual flight data. The proposed flight data acquisition and analysis system based on FlightGear can be used as an M&S tool for system performance analysis in the development of the EO/IR payload.

• 한국항공우주학회지
• /
• 제38권10호
• /
• pp.1012-1019
• /
• 2010

본 논문에서는 다중표적 비행시험을 위한 비행 자료처리 시스템이 설계되었다. 비행자료 처리를 위해 표적그룹 처리, 자료융합 처리 및 자료연동 처리가 수행 되었으며, 자료융합 필터로서 집중형 칼만필터와 연합형 칼만필터를 설계하였다. 특히 집중형 필터에 레이더의 SNR과 추정기법을 적용하여 비행체의 저고도 계측을 개선하였다. 개발된 시스템을 다중표적 비행시험에 적용한 결과, 저고도 및 초기구간에서 개선된 비행궤적을 확인할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.785-788
• /
• 2009

비행자료 처리시스템은 항공기 관제를 위한 모든 비행관련 자료를 처리하고 관리하며 항적 모델링을 하기 위한 시스템으로 항공관제용 통합 정보처리 시스템의 핵심 기능을 수행하는 역할을 담당한다. 항공기의 안전한 운항을 위해서는 비행자료 처리를 통해 항공교통관제기관간의 정보전달과 교환은 필수적인 요소이다. 따라서 본 논문에서는 비행자료 처리시스템의 개발을 위해 기능을 분석하고, 설계 시 필요한 고려사항을 살펴보고자 한다.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.654-667
• /
• 2003

This paper presents a consequence of the systematic approach to identify the aerodynamic parameters of an unmanned aerial vehicle (UAV) equipped with the automatic flight control system. A 3-2-1-1 excitation is applied for the longitudinal mode while a multi-step input is applied for lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A fully automated programmed flight test method provides high-quality flight data for system identification using the flight control computer with longitudinal and lateral/directional autopilots, which enable the separation of each motion during the flight test. The accuracy of the longitudinal system identification is improved by an additional use of the closed-loop flight test data. A constrained optimization scheme is applied to estimate the aerodynamic coefficients that best describe the time response of the vehicle. An appropriate weighting function is introduced to balance the flight modes. As a result, concurrent system models are obtained for a wide envelope of both longitudinal and lateral/directional flight maneuvers while maintaining the physical meanings of each parameter.