• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.81-85
• /
• 1991

The object of this study is to propose the bending moment-curvature relationships based on the bond properties between concrete and steel for noncraking zone, and evaluate the flexural displacement of reinforced concrete members. The bond-slip relationship and the strain hardening effect of steel were taken into account in order to evaluate the spacing of the cracks and the curvature distribution. Calculated curvature distribution along the longitudinal axis was transformed into equivalent curvature distribution. The flexural displacement was calculated by means of double intergral of the equivalent curvature. Calculated values are in good agreement with the experimental data.

• 한국환경복원기술학회지
• /
• 제16권2호
• /
• pp.127-135
• /
• 2013

This study was carried out to verify the suitability of GRS(Glass-fiber Reinforced Slag) as natural type landscape stone according to the material property and structural safety performance standards. The structural safety performance of the GRS panel showed 12.4MPa and 16.2MPa each in flexural strength at 2 and 3% content of glass fiber while the flexural strength at 4 and 5% of glass fiber content showed 26.9MPa, and 30.2MPa, respectively, all satisfying the standards. In addition, air-dried gravity was found to be 1.82~1.89 in measuring range at 2~5% level of glass fiber content, satisfy the existing standards 1.8~2.3. In structural safety performance, the range of flexural strength consequent on glass fiber content was surveyed to be 12.8~30.2MPa, all satisfying the performance standards, while 10MPa and more while the compressive strength range was found to be 41.5~53.3MPa, all satisfying the performance standards, 40~60MPa. This study judged the suitability of only the items for a property of matter of landscape stone GRS by applying the natural-form landscape stone GFRC material standard, but in case an installation constructed with GRS material comes into existence later, there should be comprehensive performance guidelines through the research on durability, landscape performance and environmental and ecological performance.

• Composites Research
• /
• 제23권3호
• /
• pp.58-63
• /
• 2010

MWCNT의 형상비 차이에 따른 MWCNT/에폭시 복합재료의 인장 및 굽힘 특성과 전기전도도를 비교하였다. 호모믹서(homomixer)와 3단롤밀(three-roll mill)을 사용하여 분산된 MWCNT와 에폭시 혼합물을 금형에 부어 압축 성형법으로 시편을 제조하였다. 에폭시 내 MWCNT의 분산 정도를 평가하기 위해 SEM을 사용하여 시편의 파단면을 관찰하였다. MWCNT의 첨가로 인해 인장강도는 최대 7%증가 하였으나 굽힘강도는 증가가 미미하였으며 형상비가 가장 큰 MWCNT의 경우에는 감소하였다. MWCNT 포함량을 변화시켰을 때 CM-95의 경우 인장강도는 1wt%에서, 굽힘강도는 0.5wt%에서 최대값을 보였으나 더 많은 포함량에서는 감소하였다. MWCNT/에폭시 복합재료의 두께 방향 및 면내방향 전기전도도는 2단자법에 의한 저항값으로부터 계산되었으며 MWCNT의 형상비가 클수록, 또 포함량이 증가할수록 전기전도도 값은 증가하였다.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4388-4397
• /
• 2015

이 연구는 아크릴 수지의 유도광선변화에 따른 속성 변화를 연구하여 최적의 특성을 가진 아크릴 수지를 개발할 수 있도록 건열 및 마이크로파 경화 의치상 아크릴 수지의 향상된 물성에 대한 연구이다. 굽힘강도와 경도, 색차를 관찰한 결과 Vertex RS 및 Paladent 20는 건식 열 경화 시편 5, 15, 25 kGy의 조사에 이상적인 속성을 보였다. 마이크로 웨이브 경화에서는 5 kGy의 조사에서 이상적인 속성을 보였다. 상관관계 분석은 ARD와 굴곡 강도 (0 418), E 계수 (0.675), 및 바콜 경도 (0 588) 사이의 긍정적인 상관관계를 보여 주었다. 방사선 경화형 기술은 고분자 복합 재료의 제작으로 인한 오염 문제를 완화하는 데 도움이 될 수 있으며 고분자의 가공성에 영향을 주지 않고 자외선 경화 기술과 나노 기술 융합 및 기계적 특성의 향상에 크게 기여할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.401-406
• /
• 2002

The purpose of this research was to obtain fatigue property of pavement concrete by flexural fatigue test. The size of specimen used in fatigue tests was 10$\times$10$\times$46cm. The specimens of pavement concrete were fabricated using the concrete at job site. The fatigue tests were performed by applying into a constant amplitude loading. The flexural fatigue tests were performed by stress levels of 90%, 80%, 70% and 60%, and stress ratio of 0.1. From this research, the S-N relationship, S-N-P relationship were derived and Weibull probability density functions was plotted using the distribution parameters.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.257-260
• /
• 2005

Graphite reinforced conductive polymer composites were fabricated by the compression molding technique. Graphite powder was mixed with an phenol resin to impart electrical property in composites. The ratio and particle size of graphite powder were varied to investigate electrical conductivity of cured composites. In this study, graphite reinforced conductive polymer composites with high filler loadings(>66wt.%) were manufactured to accomplish high electrical conductivity. With increasing the loading ratio of graphite powder, the electrical conductivity and flexural strength increased. However. above 80wt.% filler loadings, flexural strength decreased due to lack of resin. Regardless of graphite particle size, electrical conductivity wasn’t varied. On the other hand, with decreasing particle size, flexural strength increased due to high specific surface area.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.216-219
• /
• 2004

The stitching process has been widely utilized for the improvement of through-thickness property of the conventional laminated composites. This paper rep0l1s the effects of stitching on the flexural and interlaminar shear properties of multiaxial warp knitted composites in order to examine the performance improvements. Considered parameters are as follows: the stacking regularity of the multiaxial warp knits, the stitch spacings, the stitching types, the stitching location, and the location of compression fixture nose. These parameters have little effect on the flexural and interlaminar shear properties, except for the case of stitching location. Stitching on the $0^{\circ}$ fibers showed the lowest flexural strength and modulus ($12\%$reduction for both properties). The stitch spacing of 5mm resulted 8% reduction in interlaminar strength compared with 10mm spacing.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.425-431
• /
• 2005

The efficiency of complex slurry preparation route for developing the high performance SiC matrix of $RS-SiC_{f}/SiC$ composites has been investigated. The green bodies for RS-SiC materials prior to the infiltration of molten silicon were prepared with various C/SiC complex slurries, which associated with both the sizes of starting SiC particles and the blending conditions of starting SiC and C particles. The characterization of Rs-SiC materials was examined by means of SEM, EDS and three point bending test. Based on the mechanical property-microstructure correlation, the process optimization is also discussed. The flexural strength of Rs-SiC materials greatly depended on the content of residual Si. The decrease of starting SiC particle size in the C/SiC complex slurry was effective for improving the flexural strength of RS-SiC materials.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.180-183
• /
• 2009

Composite bipolar plates offer several advantages of low cost, light weight, and ease of manufacturing compared to traditional graphite plate. However, it is difficult to achieve both high electrical conductivity and high flexural strength. In this study, the hybrid carbons filled epoxy composite bipolar plates were fabricated to test electrical conductivity and flexural properties. Graphite powders were used as the main conducting filler and continuous carbon fiber fabrics were inserted to improve the mechanical properties of the composite. This hybrid composite showed improved in-plane electrical conductivity and flexural property. The moldability of the hybrid composite was also improved comparing to the continuous prepreg composite. This study suggested that the continuous carbon fiber inserted graphite/epoxy composites can be a potential candidate material to overcome the disadvantages of conventional graphite composite or continuous prepreg composite bipolar plates.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.65-66
• /
• 2019

In this study, flexural strength and impact resistance were evaluated to investigate the fiber length effect of amorphous metallic fiber. As a result, in the case of 30AFRCC, cutoff behavior due to excellent bonding performance by large specific surface area has greatly influence on the flexural and impact resistance performance. In the case of 15AFRCC, the bonding efficiency is relatively low, because the specific surface area is smaller than that of 30AFRCC and the number of fiber is large, so the effect of improving the flexural and impact resistance performance is smaller than that of 30AFRCC.