• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.2
• /
• pp.73-78
• /
• 2007

The suitability of a flexible fiber filter for removing suspended solid (SS) in a recirculating aquaculture system was evaluated. This study focused on variation in the performance with a change in filtering time, influent water quality, and filtering mode duration. The particle distribution diagram of the filter effluent showed that the number of particles bigger than $5-8{\mu}m$ decreased dramatically, and the removal efficiency exceeded 80%. Although the removal efficiencies of SS and chemical oxygen demand (COD) were dependent on the quality of the influent, the SS and COD concentrations of the effluent were not affected by the influent concentrations. This was despite the deterioration if water quality after feeding in the rearing tank. The performance of the filter was not affected by the filtering mode duration, feeding conditions, or filtering time. The SS concentration and turbidity of the recirculating-type rearing tank were 30% and 50% lower, respectively, than of the a non-recirculating-type rearing tank under the same operating conditions. The flexible fiber filter was applicable to a recirculating aquaculture system that uses plenty of seawater, based on its low filtering resistance $(2kg_f/cm^2)$, high flux $(330m^3/m^2/hr)$, and high fine particle removal efficiency (80%, $5-8{\mu}m$).

• Journal of Ocean Engineering and Technology
• /
• v.18 no.4 s.59
• /
• pp.15-22
• /
• 2004

Static and dynamic analyses of a very flexible and light riser, for upwelling the deep ocean water, is performed. In this numerical study, an implicit finite difference algorithm is employed for three-dimensional riser equations. Fluid non-linearity and bending stiffness are considered and solved, using the Newton-Raphson iteration. Maintaining the depth of end point of a flexible and light riser is very important for upwelling deep ocean water in a floating type development system. Weight is attached at the end point of the riser in order to maintain its intake depth. It is designed under the strong surface current and the configuration of the rise is predicted. In the dynamic analysis, the tension variation at the top point of the riser is presented. T e results of this study can contribute to the design of the development system in floating type for upwelling deep ocean water.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.52-52
• /
• 2011

A novel deposition process for n-type nanocrystalline silicon (n-type nc-Si) thin films at room temperature has been developed by adopting the neutral beam assisted chemical vapor deposition (NBa-CVD). During formation of n-type nc-Si thin film by the NBa-CVD process with silicon reflector electrode at room temperature, the energetic particles could induce enhance doping efficiency and crystalline phase in polymorphous-Si thin films without additional heating on substrate; The dark conductivity and substrate temperature of P-doped polymorphous~nano crystalline silicon thin films increased with increasing the reflector bias. The NB energy heating substrate(but lower than $80^{\circ}C$ and increase doping efficiency. This low temperature processed doped nano-crystalline can address key problem in applications from flexible display backplane thin film transistor to flexible solar cell.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.888-896
• /
• 2011

In this paper, we studied characteristics of the bent antenna febricated on Flexible-PCB. Flexible-PCB consisting of a polyimide has dielectric constant 3.5, thickness 0.125 mm. Proposed antennas which operates at Bluetooth band are a rectangular loop antenna and a loop antenna with inverted-L type stub. We compared the input matching and radiation characteristics of the proposed antennas under eight kinds of bending conditions.

• Transactions of Materials Processing
• /
• v.22 no.4
• /
• pp.196-203
• /
• 2013

Flexible stretch forming is an appropriate process for manufacturing of components for aerospace, shipbuilding and architecture structures. Flexible stretch forming has several advantages including that it could be applied to form various shapes such as ones with double curved surfaces. In this study, a systematic numerical simulation was conducted for forming double curved surfaces using flexible stretch forming. The desired surface had a saddle type configuration. It had two radii one of 2500mm and the other of 2000mm along its length and width. In the simulation, the decrease of elastic recovery due to the stretching was confirmed. Experiments were also conducted to confirm the viability of the process. By comparing the simulation to the experiment results, the suitability of flexible stretch forming for double curved surfaces was verified. From the results, the maximum error from desired surface was confirmed at about 1.3mm at the edge of the surface. Hence, it is confirmed that flexible stretch forming has the capability and feasibility to manufacture curved surfaces for architectural skin-structures of buildings.

• Journal of the Korean housing association
• /
• v.27 no.3
• /
• pp.1-9
• /
• 2016

It is essential to maximize the advantages of long-life housing in consideration of the occupants' demands in order to promote the construction of long-life housing. The diverse plan types with flexibility should be developed based on those demands. Therefore, this study aims to review the level of awareness of long-life housing, and identify the customer needs by conducting the survey for the preference to pre-defined plan types. The results of survey are as follows: 1) Despite the enforcement of the Long-life Housing Certification System in 2014, the recognition among the customers about the long-life housing is still on the low level as shown in that 79.9% of respondents were not aware of the long-life housing; 2) For three alternative plan types, 78.5% on the integration type in front, 63.1% on the moving kitchen type, 47.0% on the Divided Housing type had intention to change; 3) 68.9% of the total are willingly ready to purchase the long-life housing under the condition of no difference in price between normal apartment and long-life housing. The less the number of family members is, the bigger this ratio of positive purchase intention is. Reflecting these results into the designs is expected to contribute to the enhancement of customer satisfaction as well as the diffusion of long-life housing.

• International Journal of Railway
• /
• v.4 no.4
• /
• pp.97-102
• /
• 2011

In an EMS (Electromagnetic suspension)-type Maglev (Magnetically-levitated) vehicle, the flexibility of the bogie frame may affect the acceleration of the electromagnet that is input into the control system, which could lead to instability in some cases. For this reason, it is desirable to consider bogie frame flexibility in air gap simulations, for the optimization of bogie structure. The objective of this paper is to develop a flexible multibody dynamic model of 1/2 of an EMS-type Maglev vehicle that is under testing, and to compare the air gap responses obtained from the rigid and the flexible body model. The feedback control system and electromagnet models that are unique to the EMS-type maglev vehicle must be included in the model. With this model, dynamics simulations are carried out to predict the air gap responses from the two models, of the rigid and flexible model, and the air gaps are compared. Such a comparative study could be useful in the prediction of the air gap in the design stage, and in designing an air gap control system.

• Korean Institute of Interior Design Journal
• /
• v.16 no.3 s.62
• /
• pp.66-75
• /
• 2007

In this study, by comparing the development and the space types of local and foreign flexible apartments, basic data will be derived for the development of various flexible types of apartments in Korea. A total of 60 unit plans, including 30 domestic cases and 30 overseas cases of flexible apartments, are analyzed for this study. In terms of the unit plan types, Korean apartments usually had a wide front bay with shallow depth, placing more rooms on the front bay; whereas foreign apartments tend to have various unit plan types: (1) a narrow front bay with deep depth, (2) a wide front bay with shallow depth, and (3) variegated open-plan types. Many apartments in foreign countries had a double-layered structure with the. upstairs and downstairs areas. In terms of the flexible types, many Korean apartments achieved interior flexibility using non-bearing wall or sliding doors; whereas foreign apartments had a flexible space by separating the support elements and the infill elements. There was found to be a close relationship between the location of support elements and the variability of unit plans. Support elements can be placed largely into three locations: (1) Between the front side bay and the rear side bay, (2) in the center bay of a unit plan, and (3) others. Depending on the location of support elements, various types of flexible unit plans can be created. Through a comparative analysis of domestic and foreign apartments, basic data that can be used for developing various flexible unit plans was derived.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.47-56
• /
• 2008

This is a research for thickness change of denture base according to the shape of sprue & investment position of denture base in flask when injecting polyamid base resin for flexible partial denture as a part of study for Valplast among the flexible partial denture with a nylon base. It has been introduced several kinds of flexible partial denture product with a nylon base, but Valplast is the most widely used product among them. Valplast has been the most generally used material today since developed in 1950s in the United States as a material for flexible partial denture. Valplast is much more aesthetic than general metal-acrylic partial denture due to its translucent pink color and biocompatibility in terms of material characteristic. It keeps its flexibility for a long time after production, imposes a less burden on the teeth used as abutment, and it can be easily insert and remove due to its particular suppleness. Moreover, it is felt like real teeth more than metal-acrylic partial denture when being put in and takes alveolar bone under good protection since it receives occlusal force equally under the denture base. The most outstanding feature of Valplast is flexibility. The extent of its flexibility is determined by width & thickness of denture base. Considering general working procedure of Valplast, it can be seen that the thickness of denture base formed out of wax is increasing by the pressure while injecting resin. This research is to decide and test on the thickness increasing of Valplast by injecting pressure and the hypothesis upon that and is to prepare the basis estimating the increasing extent of thickness of denture base on the basis of the test result. In this test, it is expected occlusal malposition & thickness increasing of denture base by injecting pressure according to 4 kinds of test data which are to select 3 types of sprue method settling the forefront position at which the test material of fixed standard can be invested and to position the test material at the rearmost part keeping the minimum distance to set sprue. For 4 kinds of injecting test by investment position & sprue type, 20 test materials, 5 for each test were produced and a pressure of 1,180Kg was given with automatic injector of air cylinder type. The results are as follows: 1. For the amount of thickness increasing of denture base by investment position, the thickness of front investment is less increasing than the one of rear investment. 2. For the amount of thickness increasing of denture base by sprue type, the thickness of straight decompression sprue type which can absorb the injecting pressure after injecting polyamide base resin is less increasing than the other sprue types.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.53-58
• /
• 2024

Background: As social distancing persists and interest in work-life balance grows, more companies are adopting flexible work policies. While there have been studies on sleep disorders associated with different types of work, such as shift work, research exploring the relationship between flexible work schedules and sleep disorders is still limited, particularly among Korean workers. Methods: We performed a secondary analysis of the 6th Korean Working Conditions Survey, focusing on 31,243 paid workers out of a total of 50,538 participants. We defined flexible workers as those who set their own working hours. Sleep disorders were divided into three categories: 'difficulty falling asleep,' 'frequent waking during sleep,' and 'waking up feeling exhausted and fatigued.' Using scores derived from three specific symptoms, the Minimal Insomnia Symptoms Scale (MISS) was calculated to assess the prevalence of insomnia. We used chi-square tests to analyze demographic and job-related differences. A multivariate logistic regression analysis was employed to identify any relationship between flexible work schedules and sleep disorders. Results: Significant differences were found between flexible and non-flexible workers regarding age, income level, education level, and job type. Flexible workers reported sleep-related symptoms significantly more often. The odds ratio for insomnia was 1.40 (95% CI 1.21-1.61). For males, the odds ratio was 1.68 (1.36-2.08). Conclusion: This study establishes a correlation between flexible work schedules and sleep disorders among Korean salaried workers. Potential causes could include changes in circadian rhythm, increased work demands, and extended working hours. To precisely determine causality and associated diseases, further research is required.