• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.8 no.2
• /
• pp.199-203
• /
• 1997

In the treatment of spasmodic dysphonia, local injection of botulinum toxin A has been reported to be successful. The treatment of adductor type spasmodic dysphonia with botulinum toxin type A injection using a flexible nasopharyngoscope was conducted in 29 patients and using a telearyngoscope in 31 patients. These patients were given toxins in the vocal fold(s), unilaterally or bilaterally, under flexible nasopharyngoscopic guidance with sclerosing needle or telelaryngoscopic guidance with 23 gauge scalp needle attached by laryngeal forceps. Before the above procedure, laryngeal anesthesia was done with 2% pontocain instillation. Among the 60 patients, 59 patients were given the toxin successfully. Telephone interview were made at 2weeks and then at 4 weeks post injection. Among 29 patients using a flexible nasopharyngoscope, 75.8% and among 31 patients using a telelaryngoscope, 90.0% reported that the patients' symptom was improved. The functional status of the patient's disorder was classified into four grades. The mean pre-injection grade fir the patients using flexible nasopharyngoscope and telelaryngoscope was 1.6 and 2.1 respectively. And it was lowered to 0.7 and 1.1 respectively after the injection. The result was similar(p<0.05). As a self assessment method, the patients were asked to rate their voice on a scale of 100. In this study, the mean pre-injection score was 44 and 40 respectively. And it was improved to 77.7 and 69.8 respectively after the injection. The result was similar(p<0.05). In conclusion, botulinum toxin injection using a flexible nasopharyngoscope is also an effective method for the treatment of adductor type spasmodic dysphonia as using a telelaryngoscope.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.389.2-389.2
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.518-524
• /
• 2017

A flexible thermoelectric device using body heat has drawn attention as a power source for wearable devices. In this study, thermoelectric thick films were fabricated by cold pressing method using p-type antimony telluride and n-type bismuth telluride powders in accordance with specific loads. Thermoelectric thick films were denser and improved the electrical and thermoelectric properties while increasing the load of the cold pressing. The thickness of the specimen can be controlled by the amount of material; specimens were approximately 700 um in thickness. Flexible thermoelectric devices were manufactured by using the thermoelectric thick films on PI (Polyimide) substrate. The process is cheap, efficient, easy and scalable. Evaluation of power generation performance and flexibility on the fabricated flexible thermoelectric device was carried out. The flexible thermoelectric device has great flexibility and good performance and can be applied to wearable electronics as a power source.

• Structural Engineering and Mechanics
• /
• v.52 no.2
• /
• pp.323-349
• /
• 2014

In this paper, linear buckling analysis of a curved sandwich beam with a flexible core is investigated. Derivation of equations for face sheets is accomplished via the classical theory of curved beam, whereas for the flexible core, the elasticity equations in polar coordinates are implemented. Employing the von-Karman type geometrical non-linearity in strain-displacement relations, nonlinear governing equations are resulted. Linear pre-buckling analysis is performed neglecting the rotation effects in pre-buckling state. Stability equations are concluded based on the adjacent equilibrium criterion. Considering the movable simply supported type of boundary conditions, suitable trigonometric solutions are adopted which satisfy the assumed edge conditions. The critical uniform load of the beam is obtained as a closed-form expression. Numerical results cover the effects of various parameters on the critical buckling load of the curved beam. It is shown that, face thickness, core thickness, core module, fiber angle of faces, stacking sequence of faces and openin angle of the beam all affect greatly on the buckling pressure of the beam and its buckled shape.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.20-23
• /
• 1996

This paper deals with the flexible manipulator with rotational and translational degrees of freedom, which has an arm of time-varying length with the prismatic joint. The tracking control problem of the flexible manipulator is considered. First we design the controller of the 2-type robust servo system based on the finite horizon optimal control theory for the trajectory planned as a discontinuous velocity. Next, to reduce the tracking error, we use the method of the dynamic programming and of modifying the reference trajectory in time coordinate. The simulation results show that the dynamic modeling is adequate and that the asymptotic stabilization of the flexible manipulator is preserved in spite of nonlinear terms. The PTP control error has been reduced to zero completely, and the trajectory tracking errors are reduced sufficiently by the proposed control method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.389.1-389.1
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.2
• /
• pp.150-158
• /
• 1988

On a refrigeration compressor, damage of a discharge valve is one of the annoying troubles for an engineer. Small size compressors, having ring plate type discharge valve are recently used. Therefore, it is very important for engineers to measure and analyze strains of discharge valve. The purpose of this study is to obtain the basic data of the strain of the flexible ring valve. Measurements were performed by the strain gauge bonded on the surface of the flexible ring valve. Stress and strain of the valve were calculated by the method of uniformly loaded circular plates with a central hole. The results obtained are as follows; (1) the strain of flexible ring discharge valve in refrigeration compressor was influenced by tension and compression strain simultaneously. (2) for a given discharge pressure, the tangential and radial strains was increased with increasing discharge pressure. (3) the valve of radial strain was larger than that of tangential strain.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.733-736
• /
• 2007

We have proposed novel bonding technique of substrates for developing the flexible LCD with high quality. The gel type mixture of agarose and UV curable epoxy developed to obtain tight bonding ability and enhanced electro-optical characteristic simultaneously. This technique can be used to roll-to-roll process for fabricating the flexible LCDs.

• Science of Emotion and Sensibility
• /
• v.15 no.4
• /
• pp.469-476
• /
• 2012

The purpose of this study is to derive design guideline for logo design development of smart clothing using flexible plastic optical fiber. In a criterion of guideline derivation for logo design, the first, it is a question of whether it indicates an appropriate degree of brightness across the front of flexible plastic optical fiber. The second, it is a question of whether it indicates relatively an uniform brightness characteristic across the front of flexible plastic optical fiber. For this, the brightness characteristic of flexible plastic optical fiber according to the angle changes and the length of flexible plastic optical fiber was analyzed by the 'Experiment 1'. To deduce guideline for the logo design of the actual garment, the brightness characteristic of flexible plastic optical fiber about the main morpheme of the capital letter of alphabet was analyzed by the 'Experiment 2'. Based on the results of the two experiment, this study derived design guideline and limitations for logo design of smart clothing visualized by the flexible plastic optical fiber.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.733-734
• /
• 2006

In this parer, characteristics of the flexible rail in levitation control system are analysed. The magnetic levitation system is an electromagnet type and is full-scaled vehicles. The system consists of electromagnet, chopper, flexible rail, secondary suspension system and levitation controller. The mathematical modelling for the whole system is carried out. Especially, the flexible rail is modelled using second-order mass-spring-damper system. Using the derived model, the dynamic characteristics for the system are presented with different vehicle speed.