• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.163-172
• /
• 2010

In order to investigate the changes in mechanical properties of sanitary nonwoven fabrics actually used as a top sheet, the fabric was treated with a mixture of chitosan and nanosilver colloidal solution in accordance with the prescribed ratio. The former is a natural polymer with excellent biocompatibility and the latter can give an additional performance while compensating the weaknesses of chitosan of deteriorating adherence efficiency. It was shown that the bending and shearing characteristics of the chitosan/nanosilver treated fabrics decreased, which helped to make it softer, smoother and more flexible. The shape stability and drapability of the treated fabrics improved. As KES-FB system evaluation showed that Koshi was deduced, and both Numeri and Fukurami were increased. Thereby, the chitosan/nanosilver treated fabrics were smoother to provide elasticity. In the change of hand value compared to chitosan only treatment, a better THV was shown in the fabrics treated with chitosan/nanosilver mixed solution than the fabric treated with chitosan alone.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.431-434
• /
• 2002

The excessive wind-induced motion of tall buildings most frequently result from vortex shedding induced across-wind oscillations. This form of excitation is most pronounced far relatively flexible, lightweight and lightly damped structure, e.g. tall building. This paper discusses aerodynamic means for mitigating the across-wind vortex shedding induced in such situations. Emphasis is on the change of the building cross section to design the building with openings from side to side which provide pressure equalization and tend to reduced the effectiveness of across-wind forces by reducing their magnitudes and disrupting their spatial correlation. Wind tunnel test have been carried out on the Kumoh National University of Technology using rigid models with twenty-four kinds of opening shapes. Form these results, the effective opening shape, size and location for building to reducing wind-induced vortex shedding and responses are pointed out.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.151-161
• /
• 2014

The purpose of this study is to analyze the characteristics of Men's Jacket design in Paul Smith. According to the Change of Gender Image. Following study comprehends gender images and the concept of man's jacket through series of collected data and observes the influence that sociocultural background had upon men's wear. A standard of contemporary men's jacket, the subject of this study, is established based on the review of literature. According to this specific standard, photos of men's jacket were obtained from Paul Smith men collection and from these data the characteristics of men's jacket were analyzed. The method of this following study was to establish a standard of data collection from review of literature and to gather 721 photos of men's jacket from Paul Smith, which consistently appeared in first view korea for 28 seasons from 2001 s/s collection to 2014 f/w collection. Design characteristics of collected data were categorized by shape, color, fabric. This study brought forth following results. Paul Smith's jacket had more X-shape silhouette of feminine image. Color was mostly low chroma of RB series, so that masculine images could be pointed out. Compared to other brands, from 2004 to 2006, more jackets with natural pattern and abstract pattern were widely seen. In terms of fabric, feminine fabrics with glossy and flexible characteristics were used.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.4 s.19
• /
• pp.49-57
• /
• 2005

The purpose of this study is to closely examine the influence of the surcharge load applied to the retaining wall through some model tests, in which wall stiffness in each stage of excavation, horizontal displacement of the retaining wall and surface displacement of the backfill according to wall stiffness and ground conditions, and change and distribution of the earth pressure applied to it were measured and their values were produced, then these values were mutually compared with their theoretical values and their values after analysis of the data obtained at the field, and they were analytically studied, in order to closely examine the influence of the surcharge load applied to the retaining wall. Findings from this study are as follows: The shape of ground surface settlement curve on the model ground under surcharge load, different from the distribution curve of regular probabilities which is of a shape of ground surface settlement under no surcharge load, appears in that settlement in an arching shape shows where the center part of surcharge load shows the maximum settlement. In examining the maximum horizontal displacement with the surcharge load applied to each stage of excavation, it occured at the point of 0.8H(excavation depth) when finally excavated. Regarding the range in which the displacement of the retaining wall increases according to application of surcharge load, the increment of displacement showed till the point of depth which is of two times of the distance of load from the upper part of the wall. Also since each displacement of the foundation plate caused by the ground surface settlement according to each stage of excavation occured most significantly at the final stage. Also since regarding wall stiffness, the wall of its thickness of 4mm(flexible coefficient $p:480m^3/t$), produced maximum 3 times of wall stiffness than its thickness of 9mm(flexible coefficient $p: 40m^3/t$), it was found out that influence of wall stiffness is so significant.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.519-533
• /
• 2016

Objective: This study lays its aims at the definition of relevant operation method and function by researching on the value to be brought when applying smart device that can hand carry soft and flexible materials like jelly. Background: New technology and material play a role in bringing type transformation of interface and change of operation system. Recently, importance has been increased on the study of Organic User Interface (OUI) that conducts research on the value of new method of input and output adopting soft and flexible materials for various instruments. Method: For fulfillment of the study, 27 kinds of gestures have been defined that are usable in handheld device based on existing studies. Quantitative research of survey was conducted of adult male and female of 20s through 30s and an analysis was done on the function that can be linked to gestures with highest level of satisfaction. In order to analyze needs and hurdles of users for the defined gesture, a focus group interview was conducted aiming at the groups of early adopters and ordinary users. Results: As a result, it was found that users have much value regarding usability and fun for elastic device and analysis could be conducted on preferred gesture and its linkable functions. Conclusion: What is most significant with this study is that it sheds new light on the values of a device made of elastic material. Beyond finding and defining the gestures and functions that can be applied to a handheld elastic device, the present study identified the value elements of an elastic device - 'usability and 'fun' -, which users can basically desire from using it. Application: The data that this study brought forth through preference and satisfaction test with the gestures and associated functions will help commercialize an elastic device in future.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.799-813
• /
• 2022

The environment has increasingly attracted attention and fashion brands need to use new growth models by developing eco-friendly products, along with the drastic climate change. This study drew design guidelines from the factors of clothing disposal and reuse to propose ways to extend the longevity of clothing. It sets the design goals for the longevity extension of clothing as flexibility, originality, durability, and adjustability and drew a specific design guideline. The design methods used to achieve such goals are as follows. First, the design that is flexible in terms of physical changes needs to increase its activity and to be changeable, by applying pleats, rubber bands and elastic materials to the parts with many physical changes and movements. Second, it is necessary to reinforce the brand identity, create design that is flexible in terms of fashion and design very rare and attractive products, for the goal of original design beyond fashion. Third, it is necessary to increase the quality of clothing and improve the durability which can be decreased by washing and wearing. Fourth, it is necessary to create the design that can produce various styles, preserve the state of clothing and maintain its hygienic conditions by using removable detailed designs, shape-transformation designs and the designs which can be adjusted to climate changes and states, for the goal of adjustable design with better functionality. The findings provide ideas for fashion experts to pay more attention to the extending the longevity of clothing products and to develop eco-friendly designs and strategies.

• Geomechanics and Engineering
• /
• v.1 no.4
• /
• pp.323-335
• /
• 2009

Gravels forming part of the base of flexible pavements experience abrasion and crushing as a result of static and dynamic loads. Abrasion takes place when the sharp corners of the particles of gravel are removed as a result of compressive and shear loads. As a result of abrasion, the particles change in shape. Crushing is caused by the fragmentation of the particles into a mixture of many small particles of varying sizes. In this study, the abrasion and crushing of gravels are evaluated experimentally and analytically. The laboratory component of this study involves gravels that were subjected to abrasion and dynamic compression tests. The evaluation of the abrasion and crushing experienced by the gravel was carried out using fractals. In this study, the fractal dimension concept from fractal theory is used to evaluate: (a) the changes in shape, and (b) the crushing (fragmentation) of the original particles of gravel. It was determined that the fractal dimension of the profile of the particles decreased as a result of abrasion. With respect to crushing, the fragmentation fractal dimension was found to increase with the degree of breakage of the gravel. To understand the influence of crushing on the permeability of the gravels, the hydraulic conductivity of the gravels was measured before and after crushing. The hydraulic conductivity of the gravels was found to decrease with an increase in their level of crushing. Also, changes in the angle of friction of the granular materials as a result of abrasion was calculated using the Krumbein's roundness chart. The angle of friction of the granular materials was found to decrease as a result of abrasion.

• Design Convergence Study
• /
• v.14 no.5
• /
• pp.31-45
• /
• 2015

Recently, due to the development of interactive media, Interactive Typography, which explores user input and interaction is under development. Unlike traditional typography which has a fixed nature, the flexible and fluid nature of Interactive Typography and Interactive System, enables diverse results. In this study, I have developed an Interactive Typography art piece based on theoretical research. By reviewing books, papers and articles, I have tried to define the meaning and characteristics of Interactive Typography. In understanding the concept of Interactive System, I have borrowed the concept of mathematical function. Based on the research, I have designed and developed an Interactive Typography piece, 'Interactive floral type' by using Adobe flash action script. This piece explores the beautiful shape of each alphabet letters and transforms individual character into a 'flower' shape through user's mouse and keyboard input. Depending on the input the size, color, and layout and motion of text changes in real time to change the letters into beautiful flowers.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.53-57
• /
• 2017

The most representative transparent electrode in the modern society is ITO (Indium Tin Oxide). ITO is widely used in general for touch panels and displays due to its high electrical and optical properties. However, in general, mechanical deformation causes deterioration and destruction of device properties because ITO is basically vulnerable to mechanical deformation. Therefore, the in-depth understanding on the stability of ITO film during various mechanical deformations is necessary. In this study, the reliability and mechanical properties ITO sample having different length, width, and area were investigated. The electrical stability was estimated according to electrical resistance change. The stability was dropped as the sample length, and width increased and the sample area decreased. The electrical stability of ITO film was correlated with twisting strain including tensile, compressive and shear stress.