• Earthquakes and Structures
• /
• 제4권2호
• /
• pp.133-155
• /
• 2013

The earthquake responses are studied for the tall flexible structures such as TV towers when the vertical eccentricities between the discrete nodes and the corresponding centroids of investigated lumps are considered. In practical analyses, the tall flexible structures can be made into a spatial-discrete system of some certain length of beam elements with different lengths and cross-sectional areas. These elements are used to construct the investigated lumps in this paper. The different cross-sectional areas and the different lengths of two adjacent elements lead to the appearance of vertical eccentricity between the discrete node and the centroid of investigated lump within the same investigated lump. Firstly, the governing equations are established for a typical investigated lump. Secondly, the calculating formulae of the forces and moments acting on the investigated lump are derived and provided. Finally the new dynamic equilibrium equations with modified mass matrix and assemblage of stiffness matrix have been derived for the stick MDOF model based on beam theory when the existing vertical eccentricities are considered. Numerical results demonstrate that these vertical eccentricities should be considered in order to obtain the accurate earthquake responses for the tall flexible structures.

• Smart Structures and Systems
• /
• 제14권3호
• /
• pp.347-365
• /
• 2014

The main objective of this paper is to develop an innovative methodology for the vibration suppression control of the multiple degrees-of-freedom (MDOF) flexible structure. The proposed structure represented in this research as a clamped-free-free-free truss type plate is rotated by motors. The controller has two loops for tracking and vibration suppression. In addition to stabilizing the actual system, the proposed feedback control is based on a genetic algorithm (GA) to seek the primary optimal control gain for tracking and stabilization purposes. Moreover, input shaping is introduced for the control scheme that limits motion-induced elastic vibration by shaping the reference command. Experimental results are presented, demonstrating that, in the control loop, roll and yaw angles track control and elastic mode stabilization. It was also demonstrated that combining the input shaper with the proportional-integral-derivative (PID) feedback method has been shown to yield improved performance in controlling the flexible structure system. The broad range of problems discussed in this research is valuable in civil, mechanical, and aerospace engineering for flexible structures with MDOM motion.

• Structural Engineering and Mechanics
• /
• 제59권4호
• /
• pp.739-759
• /
• 2016

The failure of civil engineering systems is a consequence of decision making under uncertain conditions. Generally, buried flexible pipes are designed for their transversal behavior to prevent from the important failure mode of buckling. However, the interaction effects between soil and pipe are neglected and the uncertainties in their properties are usually not considered in pipe design. In this regard, the present research paper evaluates the effects of these uncertainties on the uncertainty of the critical buckling hoop force of flexible pipes shallowly buried using the subgrade reaction theory (Winkler model) and First-Order Second-Moment (FOSM) method. The results show that the structural uncertainties of the studied pipes and those of the soil properties have a significant effect on the uncertainty of the critical buckling hoop force, and therefore taking into account these latter in the design of the shallowly flexible pipes for their buckling behavior is required.

• 소음진동
• /
• 제8권3호
• /
• pp.450-456
• /
• 1998

A rotordynamic analysis is performed with a centrifuge rotor-bearing system for the raing speed of 100,000 rpm. The system is composed of a centrifuge rotor(or simply the rotor), flexible shaft, motor rotor and shaft, and two support rolling element bearings of the motor shaft. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor at the associated critical speeds. The latter requirements are especially important as the system crosses multiple numbers of critical speeds and as the system may not have enough separaton margins around the rating speed. As the system adopts an extra-flexible shaft, it is shown that the rotor has satisfactory small unbalance responses over higher criticals while having an unsatisfactory large one at the first critical. To supress this a bumper ring or guide bearing needs to be installed at a suitable location of the flexible shaft. It is also shown that even with the flexible shaft the dynamics of the motor must be incoporated into the full system model to accurately identify the fourth critical speed, which is close to the rating speed, and higher ones. The analysis is based on the finite element method.

• 한국지반환경공학회 논문집
• /
• 제13권9호
• /
• pp.61-68
• /
• 2012

본 연구의 주된 목적은 EPS지오폼이 연성포장의 노반재료로 사용될 때 그것의 회복탄성계수를 해석 모델화 하는 것이다. 이 해석모델은 삼축압축 시험으로부터 나온 실험결과를 토대로 만들어졌다. 그리고 이 모델은 원하는 용도에 따라서, 기존의 프로그램을 수정하거나 새로 개발하여 유한요소법을 이용한 연성포장구조를 해석하는데 사용될 수 있다. 또한 본 연구의 결과는 연성포장에서의 현장 연약지반 노상재료의 대체물로서 EPS지오폼은 적합한 것으로 확인되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.442-442
• /
• 2014

Although electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, is one of the most promising energy-storage devices because of its high power density, super-high cycle life, and safe operation. We herein report a synthesis of graphene-based flexible films by kneading method. Thus, a device can be readily made by sandwiching a polymer membrane included ionic liquid electrolytes between two identical graphene-based flexible films. Devices made with these electrodes exhibit ultrahigh energy density values while maintaining the high power density and excellent cycle stability of ECs. Moreover, these ECs maintain excellent electrochemical attributes under high mechanical stress and thus hold promise for high-energy, flexible electronics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.9-9
• /
• 2011

There has been strong demand for novel nonvolatile memory technology for low-cost, large-area, and low-power flexible electronics applications. Resistive memories based on metal oxide thin films have been extensively studied for application as next-generation nonvolatile memory devices. However, although the metal oxide-based resistive memories have several advantages, such as good scalability, low-power consumption, and fast switching speed, their application to large-area flexible substrates has been limited due to their material characteristics and necessity of a high-temperature fabrication process. As a promising nonvolatile memory technology for large-area flexible applications, we present a graphene oxide-based memory that can be easily fabricated using a room temperature spin-casting method on flexible substrates and has reliable memory performance in terms of retention and endurance. The microscopic origin of the bipolar resistive switching behaviour was elucidated and is attributed to rupture and formation of conducting filaments at the top amorphous interface layer formed between the graphene oxide film and the top Al metal electrode, via high-resolution transmission electron microscopy and in situ x-ray photoemission spectroscopy. This work provides an important step for developing understanding of the fundamental physics of bipolar resistive switching in graphene oxide films, for the application to future flexible electronics.

• 한국통신학회논문지
• /
• 제14권2호
• /
• pp.155-163
• /
• 1989

단일 링크 유연성 로보트 팔의 제어를 위해서 가정 모드 방법으로 유도된 동 특성 모델링에 QUADRATIC-최적제어 이론을 적용하였다. 이 제어 기법에 대한 제어 루우프 구성에는 모든 상태값의 피이트 백을 필요로 하지만 유연성 팔에 있어서 모드형태의 시 종속 변화율은 직접 출력으로부터 피이드백 될수 없기 때문에 최적 제어기를 실현하기 위해서는 상태 추정기의 도입이 필요하게 된다. 특히 시스템에 외란이나 측정에 노이즈가 발생할 때는 확률 추정 방법을 적용해서 상태를 추정해야 하는데 이를 위해서 칼만 필터를 사용하였다. 상태 추정기를 이용한 유연성 메니퓨레이터 팔의 시스템 모델을 모든 상태 값이 직접 측정될 수 있다고 가정한 유연성 시스템 모델과 시뮤레이션을 통해서 비교하였다.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1163-1171
• /
• 2016

Integration technologies involving flexible substrates are receiving significant attention owing the appearance of new products regarding wearable and Internet of Things technologies. There has been a continuous demand from the industry for a reliable bonding method applicable to a low-temperature process and flexible substrates. Up to now, however, an anisotropic conductive film (ACF) has been predominantly used in applications involving flexible substrates; we therefore suggest low-temperature lead-free soldering and bonding processes as a possible alternative for flex-on-flex applications. Test vehicles were designed on polyimide flexible substrates (FPCBs) to measure the contact resistances. Solder bumping was carried out using a solder-on-pad process with Solder Bump Maker based on Sn58Bi for low-temperature applications. In addition, thermocompression bonding of FPCBs was successfully demonstrated within the temperature of $150^{\circ}C$ using a newly developed fluxing underfill material with fluxing and curing capabilities at low temperature. The same FPCBs were bonded using commercially available ACFs in order to compare the joint properties with those of a joint formed using solder and an underfill. Both of the interconnections formed with Sn58Bi and ACF were examined through a contact resistance measurement, an $85^{\circ}C$ and 85% reliability test, and an SEM cross-sectional analysis.

• 간호행정학회지
• /
• 제11권3호
• /
• pp.275-288
• /
• 2005

Purpose: The Purpose of this study was to identify reasons behind the high turnover rate of nurses, and to delineate measures for inactive nurses to participate in professional nursing activities so as to upgrade the quality of the health care delivery system in Korea. Thus, tried this study to drive market entry of these idleness manpower. Methods: This study used the action research, to collect idea from hospital/nurse administrators, nurses on the job, part-time nurses. Results: This study basic data about flexible shift form through scientific paper, Internet, individual contact source collection do, and compare each situation by direct conversation with a nurse, director of a hospital, nursing administrators about flexible shift form, and analyze example of hospital which utilize flexible shift form actually or utilized and deduced advantage, shortcoming, cause of failure, cause of success, other application plan. Conclusions: 1. Emphasize that database about idleness manpower should be put priority certainly. 2. In case of idleness manpower wants a re-employment hospital and institution which can connect to administer demonstration premise . 3. Emphasize that need organ to enforce education program and this that idleness manpower can apply in nursing spot. 4. Premise nurse's great people image and research about method that convert productivity of nursing to money.