Browse > Article
http://dx.doi.org/10.4218/etrij.16.0115.0945

Sn58Bi Solder Interconnection for Low-Temperature Flex-on-Flex Bonding  

Lee, Haksun (ICT Materials & Component Research Laboratory, ETRI)
Choi, Kwang-Seong (ICT Materials & Component Research Laboratory, ETRI)
Eom, Yong-Sung (ICT Materials & Component Research Laboratory, ETRI)
Bae, Hyun-Cheol (ICT Materials & Component Research Laboratory, ETRI)
Lee, Jin Ho (ICT Materials & Component Research Laboratory, ETRI)
Publication Information
ETRI Journal / v.38, no.6, 2016 , pp. 1163-1171 More about this Journal
Abstract
Integration technologies involving flexible substrates are receiving significant attention owing the appearance of new products regarding wearable and Internet of Things technologies. There has been a continuous demand from the industry for a reliable bonding method applicable to a low-temperature process and flexible substrates. Up to now, however, an anisotropic conductive film (ACF) has been predominantly used in applications involving flexible substrates; we therefore suggest low-temperature lead-free soldering and bonding processes as a possible alternative for flex-on-flex applications. Test vehicles were designed on polyimide flexible substrates (FPCBs) to measure the contact resistances. Solder bumping was carried out using a solder-on-pad process with Solder Bump Maker based on Sn58Bi for low-temperature applications. In addition, thermocompression bonding of FPCBs was successfully demonstrated within the temperature of $150^{\circ}C$ using a newly developed fluxing underfill material with fluxing and curing capabilities at low temperature. The same FPCBs were bonded using commercially available ACFs in order to compare the joint properties with those of a joint formed using solder and an underfill. Both of the interconnections formed with Sn58Bi and ACF were examined through a contact resistance measurement, an $85^{\circ}C$ and 85% reliability test, and an SEM cross-sectional analysis.
Keywords
Sn58Bi; ACF; Flexible; Low temperature;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 Y.-S. Eom et al., "Electrical Interconnection with a Smart ACA Composed of Fluxing Polymer and Solder Powder," ETRI J., vol. 32, no. 3, June 2010, pp. 414-421.   DOI
2 K.-S. Choi et al., "Novel Bumping Material for Solder-on-Pad Technology," ETRI J., vol. 33, no. 4, Aug. 2011, pp. 637-640.   DOI
3 K.-S. Choi et al., "Novel Maskless Bumping for 3D Integration," ETRI J., vol. 32, no. 2, Apr. 2010, pp. 342-344.   DOI
4 H. Lee et al., "Development of Low Contact Resistance Interconnection for Display Applications," IEEE Electron. Syst.-Integr. Technol. Conf., Helsinki, Finland, Sept. 2014, pp. 1-5.
5 Y.-S. Eom et al., "Characterization of Polymer Matrix and Low Melting Point Solder for Anisotropic Conductive Film," Microelectron. Eng., vol. 85, no. 2, Feb. 2008, pp. 327-331.   DOI
6 K.-S. Jang et al., "Catalytic Behavior of Sn/Bi Metal Powder in Anhydride-Based Epoxy Curing," J. Nanosci. Nanotechnol., vol. 9, no. 12, Dec. 2009, pp. 7461-7466.
7 J.-W. Baek et al., "Chemo-rheological Characteristic of a Self-Assembling Anisotropic Conductive Adhesive System Containing a Low-Melting Point Solder," Microelectron. Eng., vol. 87, no. 10, Oct. 2010, pp. 1968-1972.   DOI
8 Y.-S. Eom et al., "Characterization of a Hybrid Cu Paste as an Isotropic Conductive Adhesive," ETRI J., vol. 33, no. 6, Dec. 2011, pp. 864-870.   DOI
9 K.-J. Sung et al., "Novel Bumping and Underfill Technologies for 3D IC Integration," ETRI J., vol. 34, no. 5, Oct. 2012, pp. 706-712.   DOI
10 Y.-S. Eom et al., "Characterization of Fluxing and Hybrid Underfills with Micro-encapsulated Catalyst for Long Pot Life," ETRI J., vol. 36, no. 3, June 2014, pp. 343-351.   DOI
11 K.-S. Choi et al., "Interconnection Technology Based on InSn Solder for Flexible Display Applications," ETRI J., vol. 37, no. 2, Apr. 2015, pp. 387-394.   DOI
12 J.-W. Kim et al., "Thermal Degradation of Anisotropic Conductive Film Joints under Temperature Fluctuation," Int. J. Adhesion Adhesives, vol. 28, no. 6, Sept. 2008, pp. 314-320.   DOI
13 H.-C. Bae et al., "Fine-Pitch Solder on Pad Process for Microbump Interconnection," ETRI J., vol. 35, no. 6, Dec. 2013, pp. 1152-1155.   DOI
14 H. Lee et al., "Characterization and Estimation of Solder-on-Pad Process for Fine-Pitch Applications," IEEE Trans. Compon. Packag. Manuf. Technol., vol. 4, no. 10, 2014, pp. 1729-1738.   DOI
15 J. Son et al., "HV-SoP Technology for Maskless Fine-Pitch Bumping Process," ETRI J., vol. 37, no. 3, June 2015, pp. 523-532.   DOI
16 H.-P. Shin et al., "Interfacial Reaction and Joint Strength of the Sn-58Bi Solder Paste with ENIG Surface Finished Substrate," J. KWJS, vol. 30, no. 5, Oct. 2012, pp. 458-463.
17 M.G. Cho et al., "Interfacial Reaction between 42Sn-58Bi Solder and Electroless Ni-P/Immersion Au under Bump Metallurgy during Aging," J. Electron. Mater., vol. 35, no. 1, 2006, pp. 35-40.   DOI
18 M.J. Yim and K.W. Paik, "Recent Advances on Anisotropic Conductive Adhesives (ACAs) for Flat Panel Displays and Semiconductor Packaging Applications," Int. J. Adhesion Adhesives, vol. 26, no. 5, Aug. 2006, pp. 304-313.   DOI
19 M. Zwolinski et al., "Electrically Conductive Adhesives for Surface Mount Solder Replacement," IEEE Trans. Compon., Packag., Manuf. Technol. C, vol. 19, no. 4, 1996, pp. 241-250.   DOI
20 M.A. Uddin et al., "Adhesion Strength and Contact Resistance of Flip Chip on Flex Packages-Effect of Curing Degree of Anisotropic Conductive Film," Microelectron. Rel., vol. 44, no. 3, Mar. 2004, pp. 505-514.   DOI
21 T.W. Kim, K.L. Suk, and K.W. Paik, "Low Temperature Fine Pitch Flex-on-Flex (FOF) Assembly Using Nanofiber Sn58Bi Solder Anisotropic Conductive Films (ACFs) and Ultrasonic Bonding Method," IEEE Electron. Compon. Technol. Conf., Las Vegas, NV, USA, May 28-31, 2013, pp. 461-467.
22 U.-B. Kang and Y.H. Kim, "A New COG Technique Using Low Temperature Solder Bumps for LCD Driver IC Packaging Applications," IEEE Trans. Compon. Packag. Technol., vol. 27, no. 2, June 2004, pp. 253-258.   DOI