• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.528-533
• /
• 2012

Flexible composite propellers are subject to large deformation under heavy loading, and hence the hydrodynamic performance of deformed propeller might deviate from that of the metallic propeller under negligible deformation. To design the flexible propeller, it is therefore necessary to be able to evaluate the structural response of the blades to the hydrodynamic loadings, and then the influence of the blade deformation upon the hydrodynamic loadings. We use the lifting-surface-theory-based propeller analysis and design codes in solving the hydrodynamic problem, and the finite-element-method program formulated with 20-node iso-parametric solid elements for the analysis of the structural response. The two different hydrodynamic and structural programs are arranged to communicate through the carefully-designed interface scheme which leads to the derivation of the geometric parameters such as the pitch, the rake and the skew distributions common to both programs. The design of flexible propellers, suitable for manufacturing, is shown to perform the required thrust performance when deformed in operation. Sample design shows the fast iteration scheme and the robustness of the design procedure of the flexible propellers.

• 대한인간공학회지
• /
• 제35권6호
• /
• pp.519-533
• /
• 2016

Objective: This study lays its aims at the definition of relevant operation method and function by researching on the value to be brought when applying smart device that can hand carry soft and flexible materials like jelly. Background: New technology and material play a role in bringing type transformation of interface and change of operation system. Recently, importance has been increased on the study of Organic User Interface (OUI) that conducts research on the value of new method of input and output adopting soft and flexible materials for various instruments. Method: For fulfillment of the study, 27 kinds of gestures have been defined that are usable in handheld device based on existing studies. Quantitative research of survey was conducted of adult male and female of 20s through 30s and an analysis was done on the function that can be linked to gestures with highest level of satisfaction. In order to analyze needs and hurdles of users for the defined gesture, a focus group interview was conducted aiming at the groups of early adopters and ordinary users. Results: As a result, it was found that users have much value regarding usability and fun for elastic device and analysis could be conducted on preferred gesture and its linkable functions. Conclusion: What is most significant with this study is that it sheds new light on the values of a device made of elastic material. Beyond finding and defining the gestures and functions that can be applied to a handheld elastic device, the present study identified the value elements of an elastic device - 'usability and 'fun' -, which users can basically desire from using it. Application: The data that this study brought forth through preference and satisfaction test with the gestures and associated functions will help commercialize an elastic device in future.

• 접착 및 계면
• /
• 제17권2호
• /
• pp.49-55
• /
• 2016

본 연구는 식품연포장 적층 라미네이트에 주로 사용되는 유성접착제를 대체하기 위해 아크릴 수성화방법을 활용하여 친환경적인 수성 점착제를 설계하였다. 방법으로는 음이온/비이온 그리고 인산에스테르 계면활성제들의 조합과 분자량조절제(chain transfer agent, CTA)의 양을 달리하고, 기능성단량체(functional monomer)의 종류를 달리하였다. 합성된 점착제의 가교 정도와 분자량의 영향을 각각 실험군 8종으로 점착제를 설계 합성하고 조사하였다. 그리고 별도로 분자량이 서로 다른 styrene/alpha-methyl styrene/acrylic acid (SAA) semipolymer 분산제(Mw = 13,000과 Mw = 8,600)를 기존의 계면활성제를 대신하여 사용해 감압점착제(Pressure Sensitive Adhesive, PSA)의 물성을 조사하였다. 합성된 10종의 감압점착제가 유연포장용 기본 물성 규격에 적합한지를 DSC, 입자크기, adhesion, 분자량의 물성 분석으로 평가하였다. 실험 결과 계면활성제는 음이온/비이온 조합으로, CTA는 0.2%로 기능성 단량체는 HEA, GMA를 사용한 점착제 2개의 실험군에서 유연포장에 적용 가능한 분자량과 유연성, 낮은 접착력, 작은 입자의 물성을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.516-516
• /
• 2013

Flexible Display를 제작하기 위해서는 유기소자를 보호하는 보호막이 필요하다. 유기소자는 산소 및 수분에 매우 취약하기 때문에 장수명을 확보하기 위해서는 추가적인 보호층이 필요하다. 본 논문에서는 이를 위해 Encapsulation 중 한 방법인 Barrier Film을 제작하고 그에 따른 광학적인 특성 및 수분 투습율을 조사하였다. Barrier film의 광학적 분석 방법으로는 XPS, SEM, AFM, Transmittance를 측정하였으며, XPS는 박막내의 화학적인 결합을 알기 위해서 사용되었고, SEM은 박막의 두께 및 박막내의 결함을 파악하고자 하였다. SEM을 통해 증착속도가 32.6 nm/m이라는 것을 관찰할 수 있었다. AFM을 통해 증착된 박막의 표면 거칠기를 파악하였다. Transmittance는 PET 기판을 사용하여 가시광 영역에서 80%이상의 투과도를 나타내었다. PECVD 장비를 사용하여 SiH4, NH3, N2가스를 사용하여 PET 필름 위에 박막을 증착하였으며, 유량을 10~400 sccm 내에서 변화시키고, RF Power는 각각 30~300 W 15분간 증착하였다. 제작된 보호막의 수분투습율은 $2{\times}10{_2}^{-2}g/m^2/day$ 이하의 값을 나타내었다.

• 정보통신설비학회논문지
• /
• 제2권3호
• /
• pp.36-47
• /
• 2003

Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

• 한국재료학회지
• /
• 제28권4호
• /
• pp.247-253
• /
• 2018

We examined the characteristics of indium tin zinc oxide (ITZO) thin film transistors (TFTs) on polyimide (PI) substrates for next-generation flexible display application. In this study, the ITZO TFT was fabricated and analyzed with a SiOx/SiNx gate insulator deposited using plasma enhanced chemical vapor deposition (PECVD) below $350^{\circ}C$. X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) results revealed that the oxygen vacancies and impurities such as H, OH and $H_2O$ increased at ITZO/gate insulator interface. Our study suggests that the hydrogen related impurities existing in the PI and gate insulator were diffused into the channel during the fabrication process. We demonstrate that these impurities and oxygen vacancies in the ITZO channel/gate insulator may cause degradation of the electrical characteristics and bias stability. Therefore, in order to realize high performance oxide TFTs for flexible displays, it is necessary to develop a buffer layer (e.g., $Al_2O_3$) that can sufficiently prevent the diffusion of impurities into the channel.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1551-1564
• /
• 2016

The high penetration level of inverter-based distributed generation (DG) power plants is challenging the low-voltage ride-through requirements, especially under unbalanced voltage sags. Recently, a flexible injection of both positive- (PS) and negative-sequence (NS) reactive currents has been suggested for the next generation of grid codes. This can enhance the ancillary services for voltage support at the point of common coupling (PCC). In light of this, considering distant grid faults that occur in a mainly inductive grid, this paper proposes a complete voltage support control scheme for the interface inverters of medium or high-rated DG power plants. The first contribution is the development of a reactive current reference generator combining PS and NS, with a feature to increase the PS voltage and simultaneously decrease the NS voltage, to mitigate voltage imbalance. The second contribution is the design of a voltage support control loop with two flexible PCC voltage set points, which can ensure continuous operation within the limits required in grid codes. In addition, a current saturation strategy is also considered for deep voltage sags to avoid overcurrent protection. Finally, simulation and experimental results are presented to validate the effectiveness of the proposed control scheme.

• 대한임베디드공학회논문지
• /
• 제12권6호
• /
• pp.351-358
• /
• 2017

The most common communication interface for automotive electronic control devices is CAN (Controller Area Network). Sine CAN was first adopted to Daimler vehicles in 1991, all of automobile manufacturers use the CAN communication for in-vehicle networks. However, as the number of electronic control devices connected to the CAN network rapidly increases, the CAN protocol reaches the limit of technology. To overcome this limitation, Bosch introduced the new communication protocol, that is CAN-FD (Flexible Data-rate). In this paper, we analyze the characteristics and limitations of CAN-FD communication according to the topology under the in-vehicle wiring harness environment designed based on the existing classic CAN communication.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1245-1248
• /
• 1996

This paper describes a cell programming environment that deals with problems associated with programming Flexible Manufacturing Cells(FMCs). The environment consists of the cell programming editor and the automatic generation module. In the cell programming editor, cell programmers can develop cell programs using task level description set which supports task-oriented specifications for manipulation cell activities. This approach to cell programming reduces the amount of details that cell programmers need to consider and allows them to concentrate on the most important aspects of the task at hand. The automatic generation module is used to transform task specifications into executable programs used by cell constituents. This module is based on efficient algorithm and expert systems which can be used for optimal path planning of robot operations and optimal machining parameters of machine tool operations. The development tool in designing the environment is an object-oriented approach which provides a simple to use and intuitive user interface, and allows for an easy development of object models associated with the environment.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.126-136
• /
• 1997

This paper describes a task level cell programming environment that deals with difficulties in programming Flexible Manufacturing Cells (FMCs), and consists of the cell programming editor and the automatic generation module. In the cell programming editor, cell programs can be developed with task- oriented cell specifications that reduces the amount of details to be considered by cell programmers. The automatic generation module transforms task specifications into executable programs used by cell constituents. The development tool in designing the environment is an object-oriented approach which provides a simple to use and intuitive user interface, and allows for an easy development of object models associated with the environment. Test results are illustrated in order to demonstrate the applicability of the developed envifonment.