• 한국컴퓨터그래픽스학회논문지
• /
• 제4권1호
• /
• pp.79-88
• /
• 1998

현재까지 불과 같은 유체를 렌더링하기 위한 많은 모델들이 개발되었다. 특히 메타볼은 단순성과 유동성의 특정으로 인해 눈이나 물과 같은 유체의 곡면을 모델링하기 위한 기법으로 많이 사용되어졌다. 본 논문은 중력장내에서 변형되는 물방울을 모델링하기 위한 새로운 방법을 제안한다. 이전의 연구에서 물방울은 단순한 메타볼에 의해 표현되었다. 물방울에 중력이 고려되지 않았기 때문에 렌더링 결과는 실제적인 물방울의 형태를 표현할 수 없었다. 우리는 기존의 메타볼에 실세계의 중력과 마찰력을 고려함으로서 평탄한 지면위에 놓여진 물방울의 형태를 생성하는 새로운 방법을 보여준다. 본 연구의 새로운 메타볼 모델은 이전의 메타볼이 가지는 스칼라 공간의 isosurface값을 중력을 고려한 벡터 공간으로 이동하여 얻어진다. 결과로서 광선 추적 기법과 물방울의 그림자 형성을 통해 실제적인 물방울의 형태를 렌더링한다.

• Korea-Australia Rheology Journal
• /
• 제14권4호
• /
• pp.189-201
• /
• 2002

The interaction between hydrophobically modified hydroxyethyl cellulose (hmHEC), containing approximately 1 wt% side-alkyl chains of $C_{16}$, and an anionic sodium dodecyl sulphate (SDS) surfactant was investigated. For a semi-dilute solution of 0.5 wt% hmHEC, the previously observed behaviour of a maximum in solution viscosity at intermediate SDS concentrations, followed by a drop at higher SDS concentrations, until above the cmc of surfactant when the solution resembles that of the unsubstituted polymer, was confirmed. Additionally, a two-phase region containing a hydrogel phase and a water-like supernatant was found at low SDS concentrations up to 0.2 wt%, a concentration which is akin to the critical association concentration, cac, of SDS in the presence of hmHEC. Above this concentration, SDS molecules bind strongly to form mixed micellar aggregates with the polymer alkyl side-chains, thus strengthening the network junctions, resulting in the observed increase in viscosity and elastic modulus of the solution. The shear behaviour of this polymer-surfactant complex during steady and step stress experiments was examined In great detail. Between SDS concentrations of 0.2 and 0.25 wt%, the shear viscosity of the hmHEC-polymer complex network undergoes shear-induced thickening, followed by a two-stage shear-induced fracture or break-up of the network. The thickening is thought to be due to structural rearrangement, causing the network of flexible polymers to expand, enabling some polymer hydrophobic groups to be converted from intra- to inter-chain associations. At higher applied stress, a partial local break-up of the network occurs, while at even higher stress, above the critical or network yield stress, a complete fracture of the network into small microgel-like units, Is believed to occur. This second network rupture is progressive with time of shear and no steady state in viscosity was observed even after 300 s. The structure which was reformed after the cessation of shear is found to be significantly different from the original state.

• 국제초고층학회논문집
• /
• 제1권1호
• /
• pp.15-19
• /
• 2012

Occupant footfalls are often the most critical source of floor vibration on upper floors of buildings. Floor motions can degrade the performance of imaging equipment, disrupt sensitive research equipment, and cause discomfort for the occupants. It is essential that low-vibration environments be provided for functionality of sensitive spaces on floors above grade. This requires a sufficiently stiff and massive floor structure that effectively resists the forces exerted from user traffic. Over the past 25 years, generic vibration limits have been developed, which provide frequency dependent sensitivities for wide classes of equipment, and are used extensively in lab design for healthcare and research facilities. The same basis for these curves can be used to quantify acceptable limits of vibration for human comfort, depending on the intended occupancy of the space. When available, manufacturer's vibration criteria for sensitive equipment are expressed in units of acceleration, velocity or displacement and can be specified as zero-to-peak, peak-to-peak, or root-mean-square (rms) with varying frequency ranges and resolutions. Several approaches to prediction of floor vibrations are currently applied in practice. Each method is traceable to fundamental structural dynamics, differing only in the level of complexity assumed for the system response, and the required information for use as model inputs. Three commonly used models are described, as well as key features they possess that make them attractive to use for various applications. A case study is presented of a tall building which has fitness areas on two of the upper floors. The analysis predicted that the motions experienced would be within the given criteria, but showed that if the floor had been more flexible, the potential exists for a locked-in resonance response which could have been felt over large portions of the building.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권1호
• /
• pp.8-17
• /
• 2002

This paper suggests that the immune algorithm can effectively be used in tuning of a PID controller. The artificial immune network always has a new parallel decentralized processing mechanism for various situations, since antibodies communicate to each other among different species of antibodies/B-cells through the stimulation and suppression chains among antibodies that form a large-scaled network. In addition to that, the structure of the network is not fixed, but varies continuously. That is, the artificial immune network flexibly self-organizes according to dynamic changes of external environment (meta-dynamics function). However, up to the present time, models based on the conventional crisp approach have been used to describe dynamic model relationship between antibody and antigen. Therefore, there are some problems with a less flexible result to the external behavior. On the other hand, a number of tuning technologies have been considered for the tuning of a PID controller. As a less common method, the fuzzy and neural network or its combined techniques are applied. However, in the case of the latter, yet, it is not applied in the practical field, in the former, a higher experience and technology is required during tuning procedure. In addition to that, tuning performance cannot be guaranteed with regards to a plant with non-linear characteristics or many kinds of disturbances. Along with these, this paper used immune algorithm in order that a PID controller can be more adaptable controlled against the external condition, including moise or disturbance of plant. Parameters P, I, D encoded in antibody randomly are allocated during selection processes to obtain an optimal gain required for plant. The result of study shows the artificial immune can effectively be used to tune, since it can more fit modes or parameters of the PID controller than that of the conventional tuning methods.

• 한국정밀공학회지
• /
• 제32권5호
• /
• pp.431-439
• /
• 2015

One of common challenges in designing modern production machines is realizing high speed motion without sacrificing accuracy. To address this challenge it is necessary to maximize the stiffness of the mechanical structure and the control system with consideration on the main disturbance input, cutting forces. This paper presents analysis technologies for realizing high stiffness in production machines. First, CAE analysis techniques to evaluate the dynamic stiffness of a machine structure and a new method to construct the physical machine model for servo controller simulations are demonstrated. Second, cutting forces generated in milling processes are analyzed to evaluate their effects on the mechatronics system. In the effort to investigate the interaction among the structure, controller, and process, a flexible multi-body dynamics simulation method is implemented on a magnetic bearing stage as an example. The presented technologies can provide better understandings on the mechatronics system and help realizing high stiffness production machines.

• 한국소음진동공학회논문집
• /
• 제22권5호
• /
• pp.480-488
• /
• 2012

The aircrafts with high aspect ratio wings made by a composite material have been developed, which enable high energy efficiency and long-term flight by reducing air resistance and structural weight. However, they have difficulties in securing the aeroelastic stability such as the flutter because of their long and flexible wings. The flutter is unstable self-excited-vibration caused by interaction between the structural dynamics and the aerodynamics. It should be verified analytically prior to first flight test that the flutter does not happen in the range of flight mission. Normally, the finite element model is used for the flutter analysis. So it is important to construct the finite element model representing dynamic characteristics similar to those of a real aircraft. Accordingly, in this research, to acquire dynamic characteristics experimentally the modal test of the aircraft with high aspect ratio composite wings was conducted. And then the modal parameters from the finite element analysis(FEA) were compared with those from the modal test. To make analysis results closer to test results, the finite element model was updated by means of the sensitivity analysis on variables and the optimization. Finally, it was proved that the updated finite element model is reliable as compared with the results of the modal test.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5323-5329
• /
• 2013

스마트폰의 슬림화를 위한 방법으로 스마트폰의 두께 방향이 아닌 너비 방향으로 진동하는 수평 선형 진동 모터를 여러 회사에서 현재 개발 중이다. 진동 모터 개발과정 중 수학적 모델링을 이용한 방법은 진동을 예측하기 위한 효율적인 방법 중 하나이다. 하지만 실제 수평 선형 진동모터에서는 Lorentz Force에 의한 수평 힘과 진동자 내의 자석과 브라켓 사이에 작용하는 자력에 인한 인력과 진동자 중력에 의한 수직 힘이 발생하여 진동자는 수평 선형 운동이 아닌 비틀림 운동을 하게 된다. 즉, 진동자에 수평 힘만 고려되어져 이상적인 운동으로 가정하는 수학적 모델링은 해석 오차의 발생 원인 중 하나이다. 따라서, 본 논문은 상용 동역학 해석 프로그램인 "DAFUL"을 이용한 진동 모터의 동적해석을 제시한다. 이 해석 프로그램은 진동자에 작용하는 수평, 수직 힘을 모두 고려할 수 있어 실제 진동모터의 움직임에 가까운 운동을 구현하여 수학적 모델링이 가지는 한계를 극복할 수 있다. 또한 "DAFUL"을 이용하여 해석 결과를 검증하기 위해 실험을 행하였고, 각각의 데이터를 비교 및 분석하여 결과를 확인하였다.

• 기술혁신연구
• /
• 제8권2호
• /
• pp.19-65
• /
• 2000

This study analyzes the development of technological infrastructure(TI) and technological infrastructure policy(TIP) to enhance the technological capabilities of small and mid-sized manufacturing enterprises(SMEs) in the U.S. and Korea in terms of the technological system(TS) concept, which is composed of technological infrastructure, industrial organization, and institutional infrastructure. In order to analyze the internal dynamics of the system, such as incentive mechanisms, the interaction among economic actors, and the policy implementation process, we compare the MEP(Manufacturing Extension Partnership) system of the U.S. and the Joong-Jin-Gong system of Korea. Among many similarities, contrasts, and insights from each country's effort to construct TI and TS, the main findings are as follows. (1) Both the MEP system and the Joong-Jin-Cong system are TI-led or government-led type TS. However, the nation-wide picture is different: in the U.S., most TSs including the MEP system., are classified as TI-led type; in Korea, many TI-assisted or private sector-led TSs have been developed since the early 1960s. (2) the MEP system, as a representative case of the U.S., is less stable than the Joong-Jin-Gong system of Korea in terms of financing and political cycle. (3) The MEP system is a more complex and cooperative network than the Joong-Jin-Gong system. NIST, as a critical mass, generates the system, bridges various institutions, and influences the development of the system by providing funding. (4) Regarding TI components, TSs in both countries focus on utilizing off-the-shelf technologies rather than advanced technologies. However, the direction of movement is different: in the U.S., TSs have come to emphasize existing technologies to counterbalance an innovation system that has been highly focused toward new technologies; in Korea, TSs have been moving from focusing on a higher diffusion rate of imported process technologies to stressing new technology development. (5) Personnel and staffing, embodying technological capability, is an important concern in both countries. But the human capital infrastructure of the U.S. system is more efficient and industry-oriented than that of the Korean system due to a more flexible labor market. (6) While the U.S. has a strong tradition of state and local autonomy in constructing TI and TS to fit SMEs's specific need, Korea has a centralized and bureaucratically-led policy implementation process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.107-108
• /
• 2006

This paper shows the design optimization of the paper feeding mechanism under dynamic behavior by using commercial codes of RecurDyn/MTT2D and RecurDyn/AutoDesign which are developed by functionBay, Inc. A virtual mockup for dynamics analysis of the paper feeding mechanism is build on RecurDyn/MTT2D and is simulated. Flexible paper is represented as a series of rigid bars connected by revolute joints and rotational spring dampers. Paper is fed by a contact and friction mechanism on rollers or guides. The slip of the paper and nip force of rollers are measured to estimate the system performance. After a simulation, these performances are automatically send to RecurDyn/AutoDesign which is a sequential approximate optimization tool based on the response surface modeling. RecurDyn/AutoDesign makes the approximate objective function and computes the optimized design points of the design variables and gives them to analysis tool. And then the simulation is repeated with the updated design variables. These processes are repeated until finding a tolerable design optimization. In this paper, a paper feeding mechanism is introduced and it is optimized with the proposed algorithms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.555-560
• /
• 2003

Korean High Speed Train(KHST) has been tested on the high speed test line in Osung site of Korea High Speed Rail Construction Authority (KHRC). since it was developed as G7 Project Plan In 2002. This paper introduces the dynamic test devices in KHST and shows the comparison between the results of test and theoretical computing results which derive from the new model for KHST dynamic behavior. Previous computer simulation model for KHST was developed to review wether the vehicle system was satisfied with the dynamic performance requirements during the design procedure. But It should be applied the results of the parts test for suspension elements in order to compare between the results of computation and real test. Using VAMPIRE Program made by AEA Technology in UK. the new model also was modified. This paper shows that the static wheel loads calculated from new model is similar to test results. For test on high speed line, we prepared the test devices for evaluating the dynamic performances. which was consisted of the accelerometers( based on Kisler Co.) and the data aquisition systems (based on National instrument Co.), and test program coded by LabView 6i program. These lest devices and programs are flexible to extension the channels for adding sensors and connect to the ethernet network. The acceleration of car bodies, bogie frames and axle boxes were compared between the results of computation and test at 150km/. This paper shows that the results of test were high in high frequency band range but similar frequency band range. It might be considered that these differences were caused by the test which did not performed at constant speed for comparison analysis. Also. It will be able to understand the differences and make better results through a lot of tests planed in future.