• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1872-1874
• /
• 2001

This paper presents an implantable telemetry LC resonance-type pressure sensor to measure the cerebral ventricle pressure. The sensor consists of an inductor and a capacitor. The LC resonant circuit consists of the sensor and an external antenna coil that are coupled magnetically. The resonance frequency of the circuit decreases as the applied pressure increases the capacitance of the sensor. The sensor is designed in consideration of the biocompatibility and long lifetime for continuous monitoring of the ventricle pressure. The sensor is simple to fabricate and small in comparison with others reported previously. The inductor is fabricated by electroplating and the variable capacitor is constructed with a flexible p+ diaphragm. Also, the deflection of the diaphragm, the variation of the capacitance and the resonance frequency are analyzed and calculated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1490-1493
• /
• 2009

In this work we present a new type of line plasma source using an internal-type ICP operated at 2MHz with a ferrite module, describe the effect of ferrite module on the enhancement of the plasma properties and the uniformity, and compare to those obtained with 13.56MHz discharge. Also the electrical characteristics of the antenna line and the characteristics of the plasma uniformity were studied.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.154-160
• /
• 2007

A direction finding system test-bed(DFSTB) at the electronic warfare communication-band is presented to efficiently evaluate and optimize the performance of the direction finding system through the indoor test setup. This test-bed gives a significant benefit to the designers of the direction finding system because it allows flexible test and design trade-off in the system design cycle. The system description and implementation of test-bed architecture, and the experiment results of direction finding accuracy according to modulation schemes are presented.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.65-68
• /
• 2000

In this paper, as a compatible software radio transmission system, Digital-Radio conversion system which can directly change the digital signal generated by the logic circuit into radio signal is proposed. By the vector synthesis method, the digital signals can change directly into radio signal. If such a circuit is realized, RF circuit and an antenna can be composed by the simple one device, and the radio is directly controlled and performed by the software processing which is the essence of software radio. This Digital-Radio conversion system of this paper give many number of communication channels being offered by PN code and offer a hardware design flexibility by digitization, therefore it decrease the percentage ratio of hardware of system and give a more flexible function of software basis. In this paper, this proposed Digital-Radio conversion system is called D/R converter, and the principle of this D/R converter, radio signal generation algorithm is explained and the performance characteristics of proposed algorithm is shown in time base by the computer simulation method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.253-253
• /
• 2012

Low temperature SiOx film process has being required for both silicon and oxide (IGZO) based low temperature thin film transistor (TFT) for application of flexible display. In recent decades, from low density and high pressure such as capacitively coupled plasma (CCP) type plasma enhanced chemical vapor deposition (PECVD) to the high density plasma and low pressure such as inductively coupled plasma (ICP) and electron cyclotron resonance (ECR) have been used to researching to obtain high quality silicon oxide (SiOx) thin film at low temperature. However, these plasma deposition devices have limitation of controllability of process condition because process parameters of plasma deposition such as RF power, working pressure and gas ratio influence each other on plasma conditions which non-leanly influence depositing thin film. In compared to these plasma deposition devices, neutral beam assisted chemical vapor deposition (NBaCVD) has advantage of independence of control parameters. The energy of neutral beam (NB) can be controlled independently of other process conditions. In this manner, we obtained NB dependent high crystallized intrinsic and doped silicon thin film at low temperature in our another papers. We examine the properties of the low temperature processed silicon oxide thin films which are fabricated by the NBaCVD. NBaCVD deposition system consists of the internal inductively coupled plasma (ICP) antenna and the reflector. Internal ICP antenna generates high density plasma and reflector generates NB by auger recombination of ions at the surface of metal reflector. During deposition of silicon oxide thin film by using the NBaCVD process with a tungsten reflector, the energetic Neutral Beam (NB) that controlled by the reflector bias believed to help surface reaction. Electrical and structural properties of the silicon oxide are changed by the reflector bias, effectively. We measured the breakdown field and structure property of the Si oxide thin film by analysis of I-V, C-V and FTIR measurement.

• Journal of Multimedia Information System
• /
• 제9권2호
• /
• pp.145-154
• /
• 2022

The authors are making a prototype flexible board of a radio-frequency transmitter for measuring an electromyogram (EMG) of a flying moth and plan to apply for an experimental station license from the Ministry of Internal Affairs and Communications of Japan in the summer of 2022. The goal is to create a continuous low-dose exposure standard that incorporates scientific and physiological functional assessments to replace the current standard based on lethal dose 50. This paper describes the technical evaluation of the hardware. The signal of a bipolar EMG electrode is amplified by an operational amplifier. This potential is added to a voltage-controlled crystal oscillator (27 MHz, bandwidth: 4 kHz), frequency-converted, and transmitted from an antenna about 10 cm long (diameter: 0.03 mm). The power source is a 1.55-V wristwatch battery that has a total weight of about 0.3 g (one dry battery and analog circuit) and an expected operating time of 20 minutes. The output power is -7 dBm and the effective isotropic radiated power is -40 dBm. The signal is received by a dual-whip antenna (2.15 dBi) at a distance of about 100 m from the moth. The link margin of the communication circuit is above 30 dB within 100 m. The concepts of this hardware and the measurement data are presented in this paper. This will be the first biological data transmission from a moth with an official license. In future, this telemetry system will improve the detection of physiological abnormalities of moths.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.423-432
• /
• 2023

With the increasing demand for mobile devices featuring multi-touch operation, extensive research is being conducted on touch screen panel (TSP) Readout ICs (ROICs) that should possess low power consumption, compact chip size, and immunity to external noise. Therefore, this paper discusses capacitive touch sensors and their readout circuits, and it introduces research trends in various circuit designs that are robust against external noise sources. The recent state-of-the-art TSP ROICs have primarily focused on minimizing the impact of parasitic capacitance (Cp) caused by thin panel thickness. The large Cp can be effectively compensated using an area-efficient current compensator and Current Conveyor (CC), while a display noise reduction scheme utilizing a noise-antenna (NA) electrode significantly improves the signal-to-noise ratio (SNR). Based on these achievements, it is expected that future TSP ROICs will be capable of stable operation with thinner and flexible Touch Screen Panels (TSPs).

• 한국인터넷방송통신학회논문지
• /
• 제15권2호
• /
• pp.269-272
• /
• 2015

Human Body 안테나를 신체에 탈 부착하여, Superhigh Frequency RF Beam을 통해 지상(하)에 매설된 기폭제를 전방위($360^{\circ}$)로 탐지할 수 있는 Human Body 안테나 장치에 관한 연구로, 전투복을 착용한 상태에서 신체에 탈 부착식으로 장착하여 지뢰의 금속 및 비금속이 아닌 기폭제를 전방위($360^{\circ}$)로 탐지할 수 있고, 기폭제 탐지 데이터를 원격지 전투지휘 서버로 전송시켜 데이터를 공유할 수 있으며, 플렉시블 루프 방사형 안테나 구조로 Superhigh Frequency RF Beam을 전방 지면, 측방 지면으로 복수개로 방사시키고, 기폭제 전처리부를 통해 전처리시키며, 비선형회귀모델 알고리즘 엔진부를 통해 Superhigh Frequency RF Beam에 수신되는 신호세기의 지연시간에 따라 비선형적으로 감쇄하는 특성을 반영하여, 지연시간에 따른 Superhigh Frequency RF Beam 응답신호의 세기를 기반으로 지뢰 및 폭약일 가능성이 높은 신호를 검출할 수 있어, 지뢰의 금속과 비금속이 아닌 기폭제를 식별하면서 지뢰, 불발탄, 급조폭발물을 탐지할 수 있으며, 기존보다 탐지율을 90% 향상시킬 수 있다.

• 한국통신학회논문지
• /
• 제37권2B호
• /
• pp.120-129
• /
• 2012

전술 네트워크는 통신 인프라의 부족과, 산악 지형 등의 지형적 특성에 의하여 원활한 통신이 이루어지지 않는 경우가 생긴다. 무선 메쉬 네트워크 (WMN)는 메쉬 포인트들의 멀티-홉 통신을 통하여 별도의 통신 인프라 없이 넓은 지역에 대하여 무선 통신을 공급한다. 따라서, 전술 네트워크에서 무선 메쉬 네트워크의 활용 가능성은 매우 크다. 그러나 기존에 연구되었던 무선 메쉬 네트워크는 메쉬 네트워크를 구성하는 메쉬 포인트들의 이동성을 고려하지 않는다. 본 논문에서는 전술 상황을 고려하여 메쉬 포인트들이 그룹 이동성을 갖을 때 예상되는 MAC의 collision 문제와 PHY의 채널 사용 문제를 해결한다.

• 한국진공학회지
• /
• 제18권6호
• /
• pp.488-493
• /
• 2009

탄소나노튜브 Array를 고성능의 전자소자로 응용하고자 함에 있어, 탄소나노튜브의 전기적 특성을 결정짓는 길이와 직경을 제어하는 일은 매우 중요하다. 본 연구에서는 비교적 간단한 공정을 통하여 탄소나노튜브의 길이를 제어하는 기술을 개발 하였다. 기판에 평행하게 정렬된 탄소나노튜브 Array 박막을 열화학기상증착법을 이용하여 성장 시킨 후, 간단한 포토 리소그래피 공정과 산소 플라즈마 에칭 공정을 통하여 균일한 길이의 탄소나노튜브 Array를 기판위에 형성하였다. 본 연구를 통하여 개발된 균일한 길이의 고밀도 탄소나노튜브 Array는 대면적의 나노전자 소자뿐만 아니라, 태양전지, 바이오센서 등에 적용할 수 있다.