• 한국작물학회지
• /
• 제63권3호
• /
• pp.265-271
• /
• 2018

We investigated the effect of paclobutrazol (PB) and prohexadione-Ca (PC) on seed yield, and the content of oils and endogenous gibberellin in flax grown in a greenhouse. Flax seedlings were cultivated in a greenhouse with average ambient temperature ranging from $35^{\circ}C$ to $38^{\circ}C$ during the growing period, and then PB and PC were applied on the leaves. The height of flax plants was reduced significantly by the foliar application of PB and PC. The highest ripening seed rate recorded was 94.5% with 2000 ppm PC; a 10.3% increase compared with that of the control. Both PB and PC markedly increased the fructification of flax seed. The application of two plant growth retardants resulted in higher seed production in flax seedlings grown in open field than in those grown in a greenhouse. The highest oil content was observed in flax treated with PC, whereas, the lowest oil content was observed in flax treated with PB. The oil content and ratio of unsaturated fatty acids were higher in flax seedlings grown in greenhouse than in those grown in open field. The level of two endogenous bioactive gibberellins ($GA_1$ and $GA_4$) in flax seeds decreased with the application of PB and PC. The flax plants treated with PB and PC presented higher secoisolariciresinol diglucoside content than that of the control. The optimal concentration of PC was found to be 2000 ppm. In conclusion, the foliar application of 2000 ppm PC might be useful in increasing oil content and seed production in flax plants.

• Composites Research
• /
• 제27권1호
• /
• pp.19-24
• /
• 2014

본 연구에서 아마/비닐에스테르(Flax/vinyl ester)를 적용한 친환경 구조물 설계를 위한 선행 연구로서 아마/비닐 에스테르 자연 섬유 복합재료의 기계적 물성치를 분석하였다. 시편 제작을 위해 VARTM 제작 공법이 적용되었다. 참고문헌에서 제시한 자연 섬유 복합재료의 물성치와 본 연구에서 제작된 시편의 물성치를 비교하였다. 이 결과를 바탕으로 아마/비닐 에스테르 복합재료가 친환경 구조물에 적용하는 것이 유리함을 확인하였다.

• Advances in materials Research
• /
• 제3권3호
• /
• pp.151-161
• /
• 2014

Geopolymer composites reinforced with different layers of woven flax fabric are fabricated using lay- up technique. Mechanical properties, such as flexural strength, flexural modulus and fracture toughness of geopolymer composites reinforced with 2.4, 3 and 4.1 wt% flax fibres are studied. The fracture surfaces of the composites are also examined using scanning electron microscopy. The results show that all the mechanical properties of the composites are improved by increasing the flax fibre contents. It is also found that the mechanical properties of flax fabric reinforced geopolymer composites are superior to pure geopolymer matrix. Micro-structural analysis of fracture surface of the composites indicated evidence of various toughening mechanisms by flax fabrics in the composites.

• 한국연초학회지
• /
• 제21권2호
• /
• pp.119-127
• /
• 1999

This study was conducted to evaluate the effect of cigarette papers, flax and wood, on the delivery of mainstream smoke. The main components of cigarette papers were cellulose, hemicellulose, lignin, and pectin. Lignin contents, known as precursor of smoke's phenolic compounds, of the flax and wood cigarette papers were 5.8% and 10.6%, respectively. The pyrolysis products of cigarette papers were similar by the profile of total ion chromatogram. But, the area % of some components, such as 1,3-cyclopentanedione, 3,5- dimethyl cyclopentane-1,2-dione, 2-hydroxy-3-methyl-2-cyclopentenone, dihydro-2(3H)-furanone, 3-methyl-2(5H)-fruanone, and 5-methyl-2-furaldehyde delivered through pyrolysis of the flax cigarette paper were higher than that of wood cigarette paper. Otherwise, the area % of some components, such as 2-methyl-cyclopentene-l-one), 2,3-butanedione, 2-cyclopentene-l-one, and 5-hydroxy-2-methyl-furaldehyde, 2-furaldehyde delivered through pyrolvsis of the wood cigarette paper were higher than that of flax cigarette paper. To identify the difference between two cigarette papers, we used the cigarette column filled with the cut cigarette paper instead of the cut tobacco leaf. The amounts of semi-volatile fraction delivered from flax cigarette paper was more than that of wood cigarette paper. But, by using the cut tobacco, there was no big difference of delivery amount between flax and wood cigarette papers. Also, aroma of TPM by collecting from brening cut tobacco wrapped in flax and wood papers showed a different pattern by the electonic nose system. Although the difference between two cigarette papers by using the cut tobacco was smaller than that of cut cigarette paper, this result indicated that the fax and wood had the different effects on the delivery of smoke components as shown in the sensory test results.

• Plant Resources
• /
• 제7권2호
• /
• pp.110-115
• /
• 2004

This study was conducted to evaluate the effect of herbicides on weed control, growth characteristics and yield in flax, after direct seeding it to the field, the herbicides treated had no effect on the emergence period. The major weeds were decreased some what more with mecoprop-wp, herbicide than the other herbicides and by hand weeding. Mecoprop-wp and simazin-wp were had no injury but sethoxydim-EC and 2.4-D-wp were slighthy harmful for the flax with recommended concentration, On the other hand, all herbicides were harmful in the double dosage level

• International Journal of Aerospace System Engineering
• /
• 제4권1호
• /
• pp.9-12
• /
• 2017

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered-up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• International Journal of Aerospace System Engineering
• /
• 제1권1호
• /
• pp.21-28
• /
• 2014

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered -up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• Plant Resources
• /
• 제7권1호
• /
• pp.15-21
• /
• 2004

This study was conducted to evaluate the effect of mecoprop-wp concentrations on weed control, growth characters and yield in flax, after 7cm and 14cm of plant height it to the field. The major weeds were Alopecurus aequalis var. a murensis (kom) ohwi, Persicaria hydropiper spach, Lamium amplexicaule L, Stellaria alsine Grimm var. undulata ohwi, Eleusine indica(L.) Gaertn. Flax yield were increased somewhat more with 250g/10a mecoprop-wp at 7cm of plant height than the other treatment and by hand weeding treatment of mecoprop-wp, 250g/10a at 7cm of plant height was slightly harmful for the flax with recommended concentration, On the other hand, all treatments were harmful in the double dosage level.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.64-72
• /
• 1996

To develop a scouring method for the high-grade quality and the high value added of flax for spinning, it was measured and analyzed weight loss and degree of injury with change of scouring concentration, time, temperature and pH. We got the f ollowing results; Firstly, in case that flax was scoured at a fixed condition, the weight loss and degree of injury of scoured flax under the no-cutting condition were lower than that of scoured flax under the cutting condition. Secondly, when flax was scoured with $Na_{2}CO_{3}$, it was obtained that the higher weight loss and degree of injury and weight loss with the increase of scouring time and condition. The degree of injury was lower than any other under the treatment condition of 4% $Na_{2}CO_{3}$concentraion for 2 hours. Finally, when alkaline scoured flax was rescoured by pectinase, enzyme activation effect was the most active under the treatment condition of pH 4 for 2 hours. The scouring effect was better than that of alkaline scouring only.

• Composites Research
• /
• 제36권1호
• /
• pp.32-36
• /
• 2023

최근 탄소 중립 등 지속 가능한 발전을 위한 지구환경 문제가 대두되면서 기존 풍력터빈의 소재인 유리섬유 복합재의 폐기 시 처리 방안이 문제가 되고 있다. 이를 해결하기 위해 본 연구에서는 기존의 유리섬유 복합재를 대체할 수 있는 친환경 복합재인 아마섬유 기반 복합재를 활용하여 30kW 풍력터빈 블레이드를 제조하고 적합성을 평가하였다. 먼저 친환경 천연 아마섬유 복합재의 풍력터빈 블레이드 소재로 활용 가능성을 검증하기 위해 기계적 강도 시험을 수행하였으며, 그 결과 선행 아마섬유 복합재 물성 연구 대비 좀 더 우수한 강도가 측정된 것을 확인하였다. 또한 제작된 30kW 급 아마섬유 복합재 블레이드를 활용하여 아마섬유 복합재 블레이드의 정적강도를 측정하는 정적강도 성능평가 시험을 통하여 적합성을 확인하였다.