• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.265-271
• /
• 2018

We investigated the effect of paclobutrazol (PB) and prohexadione-Ca (PC) on seed yield, and the content of oils and endogenous gibberellin in flax grown in a greenhouse. Flax seedlings were cultivated in a greenhouse with average ambient temperature ranging from $35^{\circ}C$ to $38^{\circ}C$ during the growing period, and then PB and PC were applied on the leaves. The height of flax plants was reduced significantly by the foliar application of PB and PC. The highest ripening seed rate recorded was 94.5% with 2000 ppm PC; a 10.3% increase compared with that of the control. Both PB and PC markedly increased the fructification of flax seed. The application of two plant growth retardants resulted in higher seed production in flax seedlings grown in open field than in those grown in a greenhouse. The highest oil content was observed in flax treated with PC, whereas, the lowest oil content was observed in flax treated with PB. The oil content and ratio of unsaturated fatty acids were higher in flax seedlings grown in greenhouse than in those grown in open field. The level of two endogenous bioactive gibberellins ($GA_1$ and $GA_4$) in flax seeds decreased with the application of PB and PC. The flax plants treated with PB and PC presented higher secoisolariciresinol diglucoside content than that of the control. The optimal concentration of PC was found to be 2000 ppm. In conclusion, the foliar application of 2000 ppm PC might be useful in increasing oil content and seed production in flax plants.

• Composites Research
• /
• v.27 no.1
• /
• pp.19-24
• /
• 2014

In this study, an investigation on mechanical properties of flax/vinyl ester natural fiber composite was performed as a precedent study on the design of eco-friendly structure using flax/vinyl ester composite. Vacuum Assisted Resin Transfer Molding(VARTM) manufacturing method was adopted for manufacturing the flax fiber composite specimen. The mechanical properties of the manufactured flax composites were compared with flax composite data cited from some references. Based on this, the experimental data showed that the flax/vinyl ester composite has some advantages when it is applied to environment-friendly structure.

• Advances in materials Research
• /
• v.3 no.3
• /
• pp.151-161
• /
• 2014

Geopolymer composites reinforced with different layers of woven flax fabric are fabricated using lay- up technique. Mechanical properties, such as flexural strength, flexural modulus and fracture toughness of geopolymer composites reinforced with 2.4, 3 and 4.1 wt% flax fibres are studied. The fracture surfaces of the composites are also examined using scanning electron microscopy. The results show that all the mechanical properties of the composites are improved by increasing the flax fibre contents. It is also found that the mechanical properties of flax fabric reinforced geopolymer composites are superior to pure geopolymer matrix. Micro-structural analysis of fracture surface of the composites indicated evidence of various toughening mechanisms by flax fabrics in the composites.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.2
• /
• pp.119-127
• /
• 1999

This study was conducted to evaluate the effect of cigarette papers, flax and wood, on the delivery of mainstream smoke. The main components of cigarette papers were cellulose, hemicellulose, lignin, and pectin. Lignin contents, known as precursor of smoke's phenolic compounds, of the flax and wood cigarette papers were 5.8% and 10.6%, respectively. The pyrolysis products of cigarette papers were similar by the profile of total ion chromatogram. But, the area % of some components, such as 1,3-cyclopentanedione, 3,5- dimethyl cyclopentane-1,2-dione, 2-hydroxy-3-methyl-2-cyclopentenone, dihydro-2(3H)-furanone, 3-methyl-2(5H)-fruanone, and 5-methyl-2-furaldehyde delivered through pyrolysis of the flax cigarette paper were higher than that of wood cigarette paper. Otherwise, the area % of some components, such as 2-methyl-cyclopentene-l-one), 2,3-butanedione, 2-cyclopentene-l-one, and 5-hydroxy-2-methyl-furaldehyde, 2-furaldehyde delivered through pyrolvsis of the wood cigarette paper were higher than that of flax cigarette paper. To identify the difference between two cigarette papers, we used the cigarette column filled with the cut cigarette paper instead of the cut tobacco leaf. The amounts of semi-volatile fraction delivered from flax cigarette paper was more than that of wood cigarette paper. But, by using the cut tobacco, there was no big difference of delivery amount between flax and wood cigarette papers. Also, aroma of TPM by collecting from brening cut tobacco wrapped in flax and wood papers showed a different pattern by the electonic nose system. Although the difference between two cigarette papers by using the cut tobacco was smaller than that of cut cigarette paper, this result indicated that the fax and wood had the different effects on the delivery of smoke components as shown in the sensory test results.

• Plant Resources
• /
• v.7 no.2
• /
• pp.110-115
• /
• 2004

This study was conducted to evaluate the effect of herbicides on weed control, growth characteristics and yield in flax, after direct seeding it to the field, the herbicides treated had no effect on the emergence period. The major weeds were decreased some what more with mecoprop-wp, herbicide than the other herbicides and by hand weeding. Mecoprop-wp and simazin-wp were had no injury but sethoxydim-EC and 2.4-D-wp were slighthy harmful for the flax with recommended concentration, On the other hand, all herbicides were harmful in the double dosage level

• International Journal of Aerospace System Engineering
• /
• v.4 no.1
• /
• pp.9-12
• /
• 2017

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered-up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.21-28
• /
• 2014

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered -up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• Plant Resources
• /
• v.7 no.1
• /
• pp.15-21
• /
• 2004

This study was conducted to evaluate the effect of mecoprop-wp concentrations on weed control, growth characters and yield in flax, after 7cm and 14cm of plant height it to the field. The major weeds were Alopecurus aequalis var. a murensis (kom) ohwi, Persicaria hydropiper spach, Lamium amplexicaule L, Stellaria alsine Grimm var. undulata ohwi, Eleusine indica(L.) Gaertn. Flax yield were increased somewhat more with 250g/10a mecoprop-wp at 7cm of plant height than the other treatment and by hand weeding treatment of mecoprop-wp, 250g/10a at 7cm of plant height was slightly harmful for the flax with recommended concentration, On the other hand, all treatments were harmful in the double dosage level.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.64-72
• /
• 1996

To develop a scouring method for the high-grade quality and the high value added of flax for spinning, it was measured and analyzed weight loss and degree of injury with change of scouring concentration, time, temperature and pH. We got the f ollowing results; Firstly, in case that flax was scoured at a fixed condition, the weight loss and degree of injury of scoured flax under the no-cutting condition were lower than that of scoured flax under the cutting condition. Secondly, when flax was scoured with $Na_{2}CO_{3}$, it was obtained that the higher weight loss and degree of injury and weight loss with the increase of scouring time and condition. The degree of injury was lower than any other under the treatment condition of 4% $Na_{2}CO_{3}$concentraion for 2 hours. Finally, when alkaline scoured flax was rescoured by pectinase, enzyme activation effect was the most active under the treatment condition of pH 4 for 2 hours. The scouring effect was better than that of alkaline scouring only.

• Composites Research
• /
• v.36 no.1
• /
• pp.32-36
• /
• 2023

Recently, as global environmental issues for sustainable development, such as carbon neutrality, have emerged, disposal methods of glass fiber composites, a material of existing wind turbines, have become a problem. To solve this problem, in this study, 30kW wind turbine blades were manufactured using flax fiber-based composites, which are eco-friendly natural fiber composites that can replace existing glass fiber composites, and their suitability was evaluated. First, mechanical strength tests were conducted to verify the feasibility of using eco-friendly natural flax fiber composites as a wind turbine blade material, and as a result, better strength were confirmed compared to previous studies on the properties of flax fiber composites. In addition, the suitability was confirmed through a static strength performance evaluation test to measure the static strength of the flax fiber composite blade using the manufactured 30kW class flax fiber composite blade.