• 한국수산과학회지
• /
• 제23권4호
• /
• pp.315-322
• /
• 1990

본 실험에서는 붕장어통발의 가장 바람직한 형 및 구조를 알아내기 위해, 튜브형 그물통발, 사각주형 그물통발, 사각판형 그물통발 및 파이프형 통발을 사용하여 수단에서 그들의 붕장어 유입성능을 비교하고, 이들 중 유입성능이 우수하다고 판단된 사각판형 그물통발과 파이프형 통발을 골라 해상에서 대통발 및 플라스틱통발과 어획비교 실험을 행하였다. 얻어진 결과를 요약하면 대략 다음과 같다. 1) 붕장어 유입성능은 파이프형 통발에서 가장 좋고, 다음이 사각판형 그물 통발이며, 사각주형그물통발, 튜브형 그물통발로 갈수록 나빴다. 2) 파이프형 통발은 길이 50cm 짜리와 60cm 짜리 사이에 유입성능의 차가 없었고, 둘 다 붕장어의 입롱이 쉽게 빨리 일어나므로 통발접촉 마리수가 크게 증가하지 않은 채 빨리 감소해가며, 통발투하 후 30분 이내에 접촉이 종료되었다. 3) 길이가 50cm되는 사각판형 그물통발에서는 그 높이와 입구 직경의 최소유효치가 각각 5cm로 나타났다. 4) 붕장어의 어획은 파이프형 통발에서 가장 많았고, 다음이 사각판형 그물통발이었으며, 대통발과 플라스틱통발에서는 서로간에 유의차가 없이 다같이 적었다.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.475-485
• /
• 2004

This paper was studied to investigate and compare the effects of inclined baffle plate on the turbulent flow characteristics of a gun-type gas burner through X-Y plane and Y-Z plane respectively by using X-probe from hot-wire anemometer system. For this purpose, two burner models with a cone-type baffle plate and a flat-type one respectively were used. The fast jet flow spurted from slits plays a role such as an air-curtain because it encircles rotational flow by swirl vanes and drives mixed main flow to axial direction regardless of the inclination of baffle plate. The inclined baffle plate causes axial mean velocity component and turbulent intensities etc. to be greatly concentrated towards the central part of a burner, and its effect especially appears in the range of about X/R=1.0-2.0. Also, it gives much larger size to axial mean velocity component and turbulent intensities etc formed near the slits in the range of X/R=1.4103. Especially the inclined baffle plate shifts more the Reynolds shear stress uw to the central region of a burner(Y/R=${\pm}$0.75) than the flat-type one, moreover it develops more strongly than uv.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.385-388
• /
• 2002

We measured and evaluated digital, pre-sampling and overall imaging properties (characteristic curves, Modulation Transfer Function (MTF), Wiener spectra (WS), Noise Equivalent Quanta (NEQ) and Detective Quantum Efficiency (DQE)) for the direct type and indirect type of Flat-Panel Detector (FPD). First, the digital and overall characteristic curves of the both types of FPD had more wide dynamic range than that of the S/F system. Second, the pre-sampling and overall MTF of the direct-type FPD were superior to those of the indirect-type FPD. Third, for identical exposures, the digital and overall WS of the direct-type FPD were similar or worse than those of the indirect-type FPD, and for larger exposure, the digital WS of the both types of FPD were smaller, but overall WS of the both types of FPD were larger. Fourth, the digital and overall NEQ and DQE of the direct-type FPD were worse than both NEQ and DQE of the indirect-type FPD at lower spatial frequencies, but were better at higher spatial frequencies.

• Computers and Concrete
• /
• 제20권6호
• /
• pp.731-738
• /
• 2017

Reinforced concrete flat plates consist of slabs supported directly on columns. The absence of beams makes these systems attractive due to advantages such as economical formwork, shorter construction time, less total building height with more clear space and architectural flexibility. Punching shear failure is usually the governing failure mode of flat plate structures. Punching failure is brittle in nature which induces more vulnerability to this type of structure. To analyze the flat plate behavior under punching shear, twelve finite element models of flat plate on a column with different parameters have been developed and verified with experimental results. The maximum range of variation of punching stress, obtained numerically, is within 10% of the experimental results. Additional finite element models have been developed to analyze the influence of integrity reinforcement, clear cover and column reinforcement. Variation of clear cover influences the punching capacity of flat plate. Proposed finite element model can be a substitute to mechanical model to understand the influence of clear cover. Variation of slab thickness along with column reinforcement has noteworthy impact on punching capacity. From the study it has been noted that integrity reinforcement can increase the punching capacity as much as 19 percent in terms of force and 101 percent in terms of deformation.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1073-1084
• /
• 1999

The effects of secondary flow on the structure of a turbulent wake generated by a flat plate was investigated experimentally. The secondary flow was induced In a $90^{\circ}$ curved duct in which the flat plate wake generator was installed. The wake generator was installed in such a way that the wake velocity gradient exists in the span wise direction of the curved duct. Measurements were made in the plane containing the mean radius of curvature where pressure gradient and curvature effects were small compared with the secondary flow effect. All six components of the Reynolds stresses were measured in the curved duct. Turbulence intensities in the curved wake are higher than those in the straight wake due to an increase of the turbulent kinetic energy production by the secondary flow. In the inner wake region, shear stress and strain in the plane containing the velocity gradient of the wake show opposite signs with respect to each other, so that eddy viscosity Is negative in this region. This indicates that gradient-diffusion type turbulence models are not appropriate to simulate this type of flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.87-92
• /
• 2000

This study is to investigate the heat transfer characteristics the for a round turbulent jet impinging on the flat plate with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured using liquid crystal and a digital color image processing system. The experiments were made fur the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, and the rib type [height ($d_1$) 2mm, pitch (p) from 12 to 36mm]. It was found that for $L/d{\ge}6$ the average Nusselt numbers on the flat plate with rib type C ($p/d_1=16$) are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface.

• 한국패류학회지
• /
• 제15권2호
• /
• pp.115-119
• /
• 1999

We investigated the processes of egg and larval developments for aquaculture technique development of seedling production fo the flat oyster, Ostrea denselamellosa. Teo flat oyster of larviparous type was different from the pacific oyser (ovivarous type) because their larvae (trochophore and prodissoconch larvae) in the gill released into the seawater. The process of egg development was observed by artificial fertilization at $25^{\circ}C$, using a dissecting method. The sizes of Unfertilized eggs ranged from 80 to 90 $\mu\textrm{m}$ and fertilized eggs with globule-shape was 90-100 $\mu\textrm{m}$. The Polar body appeared after fertilization and egg cleavage began within 1 hour, reaching the blastula stage after 10 hours. The trochophore in the gill appeared 2-3 days after fertilization and grew to the prodissoconch larvae (130 140 $\mu\textrm{m}$) having a complete shell after 1-2 days. The shell of prodissoconch larvae grew to 205 220 $\mu\textrm{m}$ after 10 hours, and then they became umbo stage larvae showing oval in shape. The velum of umbo stage larvae was degenerated about 17-20 days after fertilization and grew into a pediveliger with a developed foot, at this time, the shell length size was 320 360 $\mu\textrm{m}$.

• Journal of Oral Medicine and Pain
• /
• 제41권3호
• /
• pp.137-143
• /
• 2016

Posterior disk displacement (PDD) of the temporomandibular joint (TMJ) is a rare condition and most descriptions of TMJ PDD are about the adhesion of superior TMJ in which the position of disk is relatively posterior to anteriorly translated condyle in open mouth position. However, there have been reports about truly posteriorly positioned disk to the condyle in closed mouth position. This type of PDD has been classified into three subtypes-thin flat disk type, grossly posterior displaced disk type, and perforated disk type. Here, we report two rare cases of TMJ PDD, one with thin flat disk and one with perforated disk. Its possible etiology, pathogenetic mechanisms, related signs and symptoms, differential diagnoses, and treatments were reviewed and discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.849-852
• /
• 2002

Recently, amorphous selenium is used as x-ray conversion material for flat-panel x-ray detector. In this paper, we investigated the effect of breakdown under high voltage and leakage current in PN-type multi-layer structure based on p-type a-Se and n-type conductive thin film. Experimental results show that the multi-layer based detector reduced leakage current because n-type CeO2 conductive layer prevent from hole injection into a-Se layer from collection electrode, Also, the breakdown voltage was improved by dielectric layer between a-Se and top electrode.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2886-2891
• /
• 2008

The purpose of this study is to develop a highly-efficient and compact steam reformer for PEMFC changing the burner types. For the purpose some of the Can type flat burners were adopted and the results were compared with 'O' company's typical cylinderical flat burner. We used commercial STAR-CD tools for numerical calculation. We found the optimum Can type STR burner and this type of burner was highly efficient comparing with typical burner.