1 |
Micallef, K., Sagaseta, J., Fernandez, R.M. and Muttoni, A. (2014), "Assessing punching shear failure in reinforced concrete at slabs subjected to localized impact loading", J. Imp. Eng., 71, 17-33.
DOI
|
2 |
Moeinaddin, F. (2012), "Concentric punching shear strength of reinforced concrete flat plates", M.Sc. Dissertation, Swinburne University of Technology, Melbourne, Australia.
|
3 |
Muttoni, A. (2008), "Punching shear strength of reinforced concrete slabs without transverse reinforcement", ACI Struct. J., 105(4), 440-450.
|
4 |
Ruiz, F.M. and Muttoni, A. (2009), "Applications of the critical shear crack theory to punching of R/C slabs with transverse reinforcement", ACI Struct. J., 106(4), 485-494.
|
5 |
Ruiz, F.M., Mirzaei, Y. and Muttoni, A. (2013), "Post-punching behavior of flat slabs", ACI Struct. J., 110(5), 801-812.
|
6 |
Shuraim, A.B., Aslam, F., Hussain, R.R. and Alhozaimy, A.M. (2016), "Analysis of punching shear in high strength RC panels-experiments, comparison with codes and FEM results", Comput. Concrete, 17(6), 739-760.
DOI
|
7 |
Zahura, F.T. and Ahsan, R. (2016), "Numerical simulation of punching shear of flat plates with low reinforcement", J. Civil Environ. Struct. Constr. Architect. Eng., 10(7), 883-886.
|
8 |
Abaqus 6.9 (2009), Abaqus Analysis User's Manual, DassaultSystemesSimulia Corp., Providence, Rhode Island, U.S.A.
|
9 |
Abaqus 6.9 (2009), Abaqus Analysis User's Manual, DassaultSystemesSimulia Corp., Providence, Rhode Island, U.S.A.
|
10 |
ACI 318-05 (2005), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
|
11 |
Eurocode 2 (2004), Design of Concrete Structures-Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization (CEN), Brussels, Belgium.
|
12 |
Fib (2010), International Federation for Structural Concrete, Comite Euro-International and Federation for Prestressing, Lausanne, Switzerland.
|
13 |
Guandalini, S., Burdet, O. and Muttoni, A. (2009), "Punching tests of slabs with low reinforcement ratios", ACI Structural J., 106(1), 87-95.
|
14 |
Lips, S., Ruiz, F.M. and Muttoni, A. (2012), "Experimental investigation on punching strength and deformation capacity of shear-reinforced slabs", ACI Struct. J., 109, 889-900.
|
15 |
Keyvani, L., Sasani, M. and Mirzaei, Y. (2014), "Compressive membrane action in progressive collapse resistance of RC flat plates", Eng. Struct., 59, 554-564.
DOI
|
16 |
Kinnunen, S. and Nylander, H. (1960), Punching of Concrete Slabs without Reinforcement", Royal Institute of Technology, Stockholm, Sweden.
|
17 |
Kurtoglula, A.E., Cevik, A., Albegmprli, H.M., Gulsan, M.E. and Bilgehanld, M. (2016), "Reliability-based modeling of punching shear capacity of FRP-reinforced two-way slabs", Comput. Concrete, 17(1), 0-20.
|
18 |
Mahmoud, A.M. (2015), "Finite element implementation of punching shear behaviors in shear-reinforced flat slabs", Ain Sham. Eng. J., 6(3), 735-754.
DOI
|
19 |
Mirzaei, Y. and Sasani, M. (2011), "Punching shear failure in progressive collapse analysis", Struct. Congr., 2941-2950.
|
20 |
Mirzaei, Y. and Sasani, M. (2013), "Progressive collapse resistance of flat slab-modeling post punching behavior", Comput. Concrete, 12(3), 351-375.
DOI
|