• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.209-214
• /
• 2002

Mechanical micro-engineering is an easy and cheap way to fabricate micro-structures. If the application of the conventional machining method using flat-end mill becomes available for the micro-manufacturing process, it will be advanced as an extension of the conventional machining process. In this study, micro-grooves cutting using flat-end mill(($\phi$8) was performed. The characteristics on flat-end milling was investigated to improve machinability of micro-grooves. The experiments were performed according to variations of spindle revolution, depth of cut, and feed rate. Machinability through various cutting conditions was evaluated by surface geometry, tool wear, and cutting force. The results show that micro V-grooves of width(pitch) 29${\mu}{\textrm}{m}$ were acquired by flat-end milling. The maximum and minimum roughness of the wall of grooves was 438 and 67nm, respectively

• 한국석유지질학회지
• /
• 제10권1_2호
• /
• pp.10-17
• /
• 2004

한국 서남해안에 위치한 두우리 조간대는 사주와 보호섬이 존재하지 않고 외해로 열려있는 전형적인 개방형 조간대이다. 이러한 개방형 조간대에서는 바람에 의한 파랑이 퇴적작용에 중요한 요소의 하나이므로, 계절에 따른 파랑에너지의 차이가 조간대 표층퇴적물의 분포와 퇴적구조의 특성에 직접적으로 반영된다. 두우리 조간대는 상부의 조수해빈 (tidal beach), 중부의 전형적인 조간대 (intertidal flat)와 최하부의 니질대 (lowermost mudflat)로 구분된다. 이러한 구분은 표층퇴적물의 구성뿐만 아니라 조간대의 경사도에 의한 구분과도 일치한다. 조간대 내에서의 퇴적물은 1차 퇴적구조와 사서질 퇴적물의 함량에 따라 다시 사질 조간대, 혼합 조간대와 니질조간대로 나누어진다. 두우리 조간대의 표층퇴적상은 계절에 따라서 퇴적물의 함량과 퇴적구조에 변화를 보이며, 퇴적상의 변화양상은 계절풍의 방향과 세기, 폭풍과 밀접한 관련이 있다. 북서계절풍이 강한 겨울철과 봄철에는 사질 조간대의 퇴적상이 우세하며, 약한 남동풍이 우세한 여름철에는 니질 조간대의 퇴적상이 우세하게 분포한다. 가을철에는 혼합 조간대가 우세하게 나타난다. 표층퇴적물은 여름에는 전 조간대가 약 20 cm 두께의 니질 퇴적물로 뒤덮이고 가을이 지나 겨울로 가면서 니질 퇴적상에서 사질 퇴적상으로 바뀐다. 이러한 표층퇴적상의 변화는 바람도 세어지고 풍향도 바뀌어 조간대를 공격하는 파랑의 에너지가 강해지면서 여름철에 퇴적되었던 니질 퇴적물을 침식시키기 때문이다. 캔코아 주상시료에서 퇴적구조는 여름철에는 조간대 상부 ($0{\~}l.3 {\cal}km$)에서는 니질 퇴적물의 평행엽층리와 상승연흔 사엽층리가 하부 $(1.7{\~}2.3 {\cal}km)$에서는 괴상의 니질 퇴적층이, 겨울철에는 전체적으로 평행엽층리와 연흔사층리가 우세하게 나타나며, 부분적으로 둔덕사층리 (HCS)가 나타난다.

• 한국가시화정보학회지
• /
• 제18권1호
• /
• pp.18-25
• /
• 2020

The droplet impact behavior is dominated by some parameters such as surface temperature, We number, surface and fluid property. Especially, Leidenfrost effect which prevents the contact between surface and droplet is very powerful phenomenon for determining droplet impact behavior. Due to this effect, the impact regime is divided into contact boiling regime and film boiling regime whether the droplet contact with the surface. Many studies have found that surface micro-structures which processed by surface processing are effective to overcome the Leidenfrost effect. In this study, droplet impact behaviors were compared using ethanol both on flat and laser-ablated Al surface. On the flat surface, impact regime was mainly divided by surface temperature. And there is key dominant parameter for each regime. On the laser-ablated surface, we could see changed impact regime and different impact behavior such as jetting and ejection of tiny droplets despite of same impact conditions.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제10권2호
• /
• pp.49-52
• /
• 2006

요즈음 디스플레이가 평판 제품인 PDP, LCD등으로 급속히 대체됨으로써 브라운관도 두께가 점점 얇아지고 있다. 따라서 새도우마스크 부품도 점점 평평해진다. 평평한 곡면은 진동이나 충격에 약하기 때문에 곡면을 크라운하게 설계하는 방법을 제시한다.

• Korean Journal of Mathematics
• /
• 제24권4호
• /
• pp.613-626
• /
• 2016

In this article, we study skew ruled surfaces by using the geodesic Frenet trihedron of its generator. We obtained some conditions on this surface to ensure that this ruled surface is flat, II-flat, minimal, II-minimal and Weingarten surface. Moreover, the parametric equations of asymptotic and geodesic lines on this ruled surface are determined and illustrated through example using the program of mathematica.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.25-32
• /
• 2000

In this paper, experiments investigating the high-temperature region heat transfer coefficients for the spray cooling of hot flat plates were performed by down spray water using flat spray nozzles. The heat transfer surface is made of copper and is 100mm in length and 40mm in width and 15mm in thickness. The experimental condition of spray are as follows: temperatures of the water droplets are T=20~$80^{\circ}C$ and droplets volume fluxes are D=0.001565~0.010438$m^3/m^2s$. Next, correlating equations for the heat transfer characteristics of spray cooling in the high temperature region are developed from the effects of droplets volume flux and the surface temperature of heat transfer plate.

• Ocean Science Journal
• /
• 제40권4호
• /
• pp.221-227
• /
• 2005

The architecture of macrofaunal burrows and the total area of the sediment-water interface created by biogenic structure were investigated in the Donggeomdo tidal flat on the west coast of Korea. Resin casting methods were applied to recover burrows of four dominant species, Macrophthalmus japonicus, Cleistostoma dilatatum, Perinereis aibuhitensis, and Periserrula leucophryna, and whole burrows within the casting area at three sites in different tidal levels. P. leucophryna excavated the largest burrow in terms of a surface area among them. In the case of whole burrow casting, the space occupied by the biogenic structure was extended into deeper and expanded more greatly at the higher tidal level. In the uppermost flat, the burrow wall surface area within sediment was more extensive than the sediment surface area. Increased oxygen supply through the extended interface could enhance the degradation rates of organic carbon and also change the pathways of degradation. Quantifying the relationship between the extended interface and mineralization rate and pathway requires more extensive study.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.181-186
• /
• 2015

This study presents the dynamic wetting characteristics of an impact droplet on hole-patterned textured surfaces. The flat surfaces were manufactured by a drilling machine to generate the micro-order holes, leading to make the surface hydrophobic. Other flat surfaces were fabricated by the anodizing technique to make hydrophilic texture surfaces with a nanometer order. For hydrophilic and hydrophobic textured surfaces with similar texture area fractions, the impinging droplet experiments were conducted and compared with flat surface cases. As results, an anodized textured surface decreases apparent equilibrium contact angle and increases contact diameters, because of increase in contact area and surface energy. This is attributed to more penetration inside holes from larger capillary pressure on nanometer-order holes. On the other hand, temporal evolution of the contact diameter is smaller for the hydrophobic textured surface from less penetration on the micro-order holes.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.234-243
• /
• 1999

Using the geometric and the vector methods, three dimensional surface texture and roughness models in flat end milling are developed. In these models, rear cutting effect on surface generation is considered along with tool run-out and tool setting error including tool tilting and eccentricity between tool center and spindle rotational center. Rear cutting is the secondary cutting of the already machined surface by the trailing cutting edge. The effects of tool geometry and tool deflection on surface roughness are also considered. For representing the surface texture more practically, three dimentional surface topography parameters such as RMS deviaiton, skewness and kurtosis are introduced and used in expressing the surface texture characteristics. Under various cutting conditions, it is confirmed that the developed models predict the real surface profile precisely. These models could contribute to the cutter design and cutting condition selection for the reduction of machining and manual finishing time.

• 대한원격탐사학회지
• /
• 제15권3호
• /
• pp.217-225
• /
• 1999

Landsat TM 위성영상을 이용하여 전라북도 줄포만 간석지의 미지형을 무감독분류의 ISODATA 기법으로서 분석한 결과 mudflat, mixed flat, sandflat 의 3지형으로 분류되었다. 각각의 미지형들은 퇴적물 입도와 지형에 있어서 상이한 특성을 나타내었으며, mudflat은 내만쪽에 위치하고 snadflat은 만의 입구 그리고 mixedflat은 그 사이에 각각 분포하였다. 각 지역의 지형특성으로는 2m 내외의 갯골이 평탄면 사이에 분포하는 mudflat과 평균기복이 10cm 이하로서 아주 평탄한 지형으로 물결무늬가 발달한 sandflat 그리고 이 양자의 중간형태를 취하는 mixedflat 으로 구분되었다. 아울러 Landsat TM의 7개의 밴드중에서 밴드 5와 7이 간석지의 미지형분류, 밴드4는 육지와 간석지의 분류 그리고 밴드 3은 해면과 간석지의 분류에 각각 효율적임이 밝혀졌다.