• Ocean Science Journal
• /
• v.43 no.4
• /
• pp.223-232
• /
• 2008

In order to determine the temporal and spatial variations of nutrient profiles in the shallow pore water columns (upper 30 cm depth) of intertidal sandflats, we measured the salinity and nutrient concentrations in pore water and seawater at various coastal environments along the southern coast of Korea. In the intertidal zone, salinity and nutrient concentrations in pore water showed marked vertical changes with depth, owing to the active exchange between the pore water and overlying seawater, while they are temporally more stable and vertically constant in the sublittoral zone. In some cases, the advective flow of fresh groundwater caused strong vertical gradients of salinity and nutrients in the upper 10 cm depth of surface sediments, indicating the active mixing of the fresher groundwater with overlying seawater. Such upper pore water column profiles clearly signified the temporal fluctuation of lower-salinity and higher-Si seawater intrusion into pore water in an intertidal sandflat near the mouth of an estuary. We also observed a semimonthly fluctuation of pore water nutrients due to spring-neap tide associated recirculation of seawater through the upper sediments. Our study shows that the exchange of water and nutrients between shallow pore water and overlying seawater is most active in the upper 20 cm layer of intertidal sandflats, due to physical forces such as tides, wave set-up, and density-thermal gradient.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.184-190
• /
• 2016

Recently, wood is attracting attention as green building interior decoration material. When wood is used as building interior decoration material, excellent dimensional stability and thermal performance is required. In this study, superheated steam treatment process and thermal compression process were applied to flat sawn Pinus koraiensis wood panel in order to improve dimensional stability and thermal performance. According to results of this study, superheated steam treatment process and thermal compression process improve thermal performance and dimensional stability of wood, especially in tangential direction. The spring back in radial direction reduces the effect of thermal compression on dimensional stability of wood in radial direction.

• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.57-61
• /
• 1974

The patient, a girl of 19 years in good health, had a class I malocclusion. The maxillary left centra1 incisors and both lateral incisors had already erupted. But the space for the right central incisor was partially closed by the mesial drifting of the neighboring teeth. The caused a shift in the midline and a cross-bite relation on the incisors. X-ray examination revealed the presence of the right central incisor in the alveolar bone and odontoma just above the crown of the right central incisor. After enough space for the impacted incisor was created in the dental arch with a open-coil spring the rectangular incision was made. Removing the odontoma uncovered the flat surface of the labial aspect of the incisor. During the tooth had erupted of its own accord, any unnecessary force had been imposed on the tooth. When it was decided that the tooth should be brought out by the mechanical device, the gold cast onlay with hook was used and run a light elastic between this hook and the main arch wire. Finally the tooth was brought down to the arch level. The result was excellent. Fortunately the esthetic problem and any detrimental effects on the psychological make-up could be avoided.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.281-290
• /
• 2013

The vertical structure of sediment temperatures in the tidal flats of Geunso Bay and Seonyu Island in western Korea were measured for more than a year and analyzed. Mean temperature decreased with depth in spring and summer. On the contrary, it increased with depth in fall and winter, faithfully reflecting the seasonal variation resulting from the heating and cooling of the surface sediment. The surface sediment temperatures are shown to be strongly dependent on solar radiation, M2, and M4 tidal components. They are also weakly affected by precipitation. Thermal diffusivity of sediment is estimated at each depth and in each of the four seasons by applying the amplitude equation method. In Geunso Bay, the estimated seasonal-mean values decreased with depth, while they showed little change in Seonyu Island. Depth-averaged thermal diffusivity in Geunso Bay ($1.94 {\times}10^{-7}m^2/s$) was smaller than Seonyu Island ($2.20 {\times}10^{-7}m^2/s$). The variability of thermal diffusivity is shown to corelate with sediment composition and sorting from the grain-size analysis of intertidal sediments in Geunso Bay and Seonyu-do.

• The Korean Journal of Ecology
• /
• v.27 no.2
• /
• pp.73-77
• /
• 2004

Movement of shorebirds for roosting was studied to find their response to insufficient roosting area on Ganghwa Island. It was taken from two kinds of aspects of population fluctuation and direct observation of movement from March to October in 2002. Based on the data from their weekly fluctuation and flight observation, shorebirds on Ganghwa Island moved to roosts located far away. Shorebirds feeding at southern Ganghwa Island moved to Yeongjong Island for roosting during the spring tide period. High tide count showed that the number of shorebirds on Yeongjong Island increased strikingly, while the number of birds on Ganghwa Island decreased. As the tide level increased, the number of shorebirds on Ganghwa Island decreased in the fall migrating season (r$_{s}$= -0.81, p＜0.001), whereas that on Yeongjong Island was not correlated significantly. Direct observation showed that some of the birds on the upper tidal zone of Ganghwa Island moved directly to the northern mudflat of Yeongjong Island during the flowing tide or dropped by flat zone on Seondu-ri. Insufficient coastal wetlands on Ganghwa Island induced them to move away from the island for roosting place and to endure costly flight energy expenditure. The development of wetlands on the southern Yeongjong Island would make them have no place available to roosts. Therefore this study proposes that shorebird roosts on Ganghwa Island should be created to conserve their habitat.t.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.733-740
• /
• 2016

To achieve bipedal walking in real human environments, a bipedal robot should be capable of modifiable walking both on uneven terrain with different heights and on flat terrain. In this paper, a novel walking pattern generator based on a 3-D linear inverted pendulum model (LIPM) is proposed to achieve this objective. By adopting a zero moment point (ZMP) variation scheme in real time, it is possible to change the center-of-mass (COM) position and the velocity of the 3-D LIPM throughout the single support phase. Consequently, the proposed method offers the ability to generate a modifiable pattern for walking on uneven terrain without the necessity for any extra footsteps to adjust the COM motion. In addition, a control strategy for bipedal walking on uneven terrain with unknown height is developed. The torques and ground reaction force are measured through force-sensing resisters (FSRs) on each foot and the foot of the robot is modeled as three virtual spring-damper models for the disturbance compensation. The methods for generating the foot and vertical COM of 3-D LIPM trajectories are proposed to achieve modifiable bipedal walking on uneven terrain without any information regarding the height of the terrain. The effectiveness of the proposed method is confirmed through dynamic simulations.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.95-101
• /
• 2015

Purpose: During the start-up period, the response time of a hydraulic system increases in the winter because of the increased oil viscosity caused by the cold weather. The problems of delayed tractor starting and excessive wear of the clutch disk occur for these reasons. Therefore, this study develops an analysis model using the commercial hydraulic analysis program AMESim to examine the characteristics of delays in power shuttle starting at different oil temperatures. Methods: In the experiment, a tractor was stationary on a flat surface with the engine running at a constant speed of 1,080 rpm. The forward lever was then pressed to activate the power shuttle at three different oil temperatures, and the pressure changes were measured. The pressure on the forward clutch control valve was measured by a pressure gauge installed on the hydraulic line supplied to the transmission from the main valve. An analysis model was also developed and verified with actual tests. Results: The trend of the simulated pressures of the power shuttle is similar to that of the measured pressures, and a constant modulation period was observed in both the simulation and test results. However, the difference found between the simulation and test results was the initial pressure required to overcome the initial force of the clutch spring. Conclusions: This study also examines the characteristics of the delayed startup of the power shuttle at different oil temperatures through simulations.

• Ocean and Polar Research
• /
• v.40 no.1
• /
• pp.15-22
• /
• 2018

In the present study, we investigated temporal variation in the reproductive effort and biochemical contents in adult Manila clam Ruditapes philippinarum at Shi-Heung-Ri beach on the east coast of Jeju Island. Gonad-somatic index (GSI), a ratio of the egg mass to the total biomass determined using ELISA increased dramatically from late May to June (7.1% to 19.5%). In mid-July, GSI dropped to 15.1%, indicating spawning on a small scale during this period. GSI also declined dramatically from late August (15.5%) to September (4.3%), suggesting that massive spawning occurred during this period. A positive correlation was observed between clam size and potential fecundity, while potential fecundity ranged between 1.19-8.40 million eggs/clam. Total proteins and lipids in the tissue increased from late spring to mid-summer, coinciding with an increase in GSI. Protein, lipid and carbohydrate contents in the tissue were lowest in January, indicating that clams were suffering from poor nutritional circumstances, which may be associated with poor food supply from the environment. Monthly increase and/or decrease in the body weight were closely related to gonad maturation and subsequent spawning, which was also linked to temporal changes in the contents of protein, lipid and carbohydrates in the tissue.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 1992.11a
• /
• pp.91-101
• /
• 1992

The aim of this study is to offer the basic data concerning the architectural characteristics of the recently constructed farmhouses built by the residents’ self-planning after 1987, compared with the standard housing plan, for the desirable farmhouse planning. The 77 farmhouses, scattered in Milyang-gun, Yangsan-gun and Ulsan-gun near Ulsan city, were selected for the field measurement and the data, compared with the 14 standard housing plans, were analysed by the qualitative method. The farmhouses studied here showed average size of 25-pyongs(82.5m2) and took the flat slab type of roof by the masonry construction of the red blicks. The characteristics in planning were \circled1 the Anbang placed adjacent above the living room, \circled2 a pare of double-sliding doers for the Anbang. \circled3 a pare of double-sliding doors between the living room and the yard for the openness of the living room, \circled4 a door between the living room and the kitchen, \circled5 the multiuse-room by the kicthen for supplemental use, and \circled6 the storage space as attics secured indoor. The standard housing plans, different from these of the recently constructed farmhouses, placed emphasis on the separativeness of each space using the one hinged doors. The farmhouses built recently therefore were not affected by the characteristics of the standard housing plans.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.227-231
• /
• 2004

Technological advance in information technology has sparked the necessity of small form factor (SFF) optical disk for mobile devices. Small form factor optical disk is highly anticipated to be a next generation storage device because it can be used for a cost-effective way compared with solid state memory. For the application to the 5 mm height small-form-factor optical disk drive, we have presented an optical flying head and swing arm actuator. In this study, we propose a small 1-axis actuator for compensating ficus error and SA due to the variation of cover-layer thickness in the cover-layered small optical disk. The main design issues of the 1-axis actuator are the realization of compact structure and the new support structure of the actuator: Finally, the compensating principle and performance of the 1-axis actuator will be explained.