• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.251-257
• /
• 2012

Human body communication means transmitting and receiving data through human body medium or through free space along with the human body skin. Electric field distribution around the human body between the transmitter and the receiver were calculated at five different frequencies with 5 MHz interval between 10 MHz and 30 MHz. Commercial electromagnetic simulation tool was used for the calculation of E-field distributions applying the Korean standard male model including 29 different kinds of human tissues. After calculating specific absorption rate(SAR) values on back of the hand, it was compared with International Commission on Non-Ionizing Radiation Protection(ICNIRP) human protection guideline. While conductivities(${\sigma}$) and relative permittivities(${\varepsilon}_r$) of the human tissues for each frequency were input as the analyzing parameters, electric field intensities near both hands were integrated along the integral line between the nearby electrodes for the calculation of the transmitting and receiving voltages whose ratio was defined as channel loss. The calculated channel losses were about ($75{\pm}1$) dB and showed nearly flat response all through the evaluated frequencies.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.687-694
• /
• 1994

Heteroepitaxial InP/GaAs layers were grown using the selective liquid phase epitaxy (SLPE) technique. It was observed that the optimum LPE conditions were $660^{\circ}C$ growth temperature, $5^{\circ}C$ supercooling, and $0.4^{\circ}C$/min cooling rate. Maximum expitaxial layer overgrowth (ELO) of 110-160$\mu \textrm{m}$ was obtained when the seed was aligned along (112) orientation. Initial melt-back of the substrate was observed but limited to the seed region so that flat In-Ga-As-P layers were grpwn throughout the GaAs substrates. The InP/GaAs heteroepitaxial structure could be obtained by growing an additional InP layer on top of the In-Ga-As-P layer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.4
• /
• pp.45-71
• /
• 1991

The landscape systems in Korean island settlements can be recognized as results of ingabitants' ecological adptation to the isolated environment with the limited natural resources. Both the fishery dominant industry in island society and ecological nature of its environments seem to have influenced on inhabitants' environmental cognition as well as the physical landscape of island villages such as its location, spatial pattern in each village, housing form and so on. This study was done mainly by both refering to the related documents and direct observations in case study areas, and results of the study can be summarized as follows. 1. In general, the landscape of an individual island seems to take more innate characteristics of island's own, corresponding to the degree of isolation from mainland. That is, while the landscape of island in neighboring waters takes both inland-like and island-innate landscape character at the same time, the one in the open sea far from land takes more innate landscape character of all island's own in the aspects of village location, land use and housing density etc. 2. The convex landform of most islands brings about more centrifugal village allocation than centripetal allocation in most inland villages. And thus most villages in each island face extremely diverse directions different from the south facing preference in most inland rural villages. 3. Most island villages tend to be located along the ecologically transitional strip between land and sea, so called 'line of life', rather than between hilly slope and flat land as being in most inland village locations. So they are located with marine ecology bounded fishing ground ahead and land ecology bounded agricultural site at the back of them. 4. The settlement pattern of the island fishing villages shows more compact spatial structure than that of inland agricultural villages, due to the absolute limits of usable land resources and the adaptation to the marine environment with severe sea winds and waves or for the easy accessability to the fishing grounds. And also the managerial patterns of public owned sea weed catching ground, which take each family as the unit of usership rather than an individual, seem to make the villagescape more compact and the size of Individual residence smaller than that of inland agricultural village. 5. The folk shrine('Dand') systems, in persrective of villagescape, represent innate environmental cognition of island inhabitants above all other cultural landscape elements in the island. Usually the kinds and the meanings of island's communal shrine and its allocative patternsin island villagescape are composed of set with binary opposition, for example 'Upper shrine(representing 'earth', 'mountain' or 'fire')' and 'Lower Shrine(representing 'sea', 'dragon' or 'water') are those. They are usually located at contrary positions in villagescape each other. That is, they are located at 'the virtical center or visual terminus(Upper shrine at hillside behind the village)' and 'the border or entrance(Lower Shrine at seashore in front of the village)'. Each of these shirines' divinity coincides with each subsystem of island's natural eco-system(earth sphere vs marine sphere) and they also contribute to ecological conservation, bonded with the 'Sacred Forest(usually with another function of windbreak)' or 'Sacred Natural Fountain' nearby them, which are representatives of island's natural resources.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.167-174
• /
• 2001

Reflection method using ultrasonic source has been attempted to obtain the information about tunnel lining structures composed of lining, shotcrete, water barrier and voids at the back of lining. In this work, two different types of sources, i.e. single-pulse source and sweep source, can be used. Single-pulse source with short time duration has the frequency content whose amplitudes tend to be concentrated around the dominant frequency, whereas sweep source with long time duration denotes a flat distribution of relatively larger amplitude over a broad frequency band, although the peak to peak amplitude of single-pulse source wavelet is equivalent to that of sweep source one. In traditional seismic application, a single-pulse source(weight drop, dynamite) is typically used. However, to investigate the fine structure, as it is the case in the tunnel lining structure, the sweep wavelet can be also a desirable source waveform primarily due to the higher energy over a broad frequency band. For the investigation purposes of sweep source, a physical modeling is a useful tool, especially to study problems of wave propagation in the fine layered media. The main purpose of this work was using a physical modeling technique to explore the applicability of sweep source to the delineation of inner layer boundaries. To this end, a two-dimensional physical model analogous to the lining structure was built and a special ultrasonic sweep source was devised. The measurements were carried out in the sweep frequency range 10 ∼ 60 KHz, as peformed in the regular reflection survey(e.g. roll-along technique). The measured data were further rearranged with a proper software (cross-correlation). The resulting seismograms(raw data) showed quitely similar features to those from a single-pulse source, in which high frequency content of reflection events could be considerably emphasized, as expected. The data were further processed by using a regular data processing system "FOCUS" and the results(stack section) were well associated with the known model structure. In this context, it is worthy to note that in view of measuring condition the sweep source would be applied to benefit the penetration of high frequency energy into the media and to enhance the resolution of reflection events.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.600-613
• /
• 2011

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

• Journal of the Korean Society of Costume
• /
• v.1
• /
• pp.101-117
• /
• 1977

This thesis is a study of the Simui(深衣) system which was a dress regulation peculiar to old China with skirt and coat. The origin of Simui is a very long time, that is, before Ju dynasty in China. Its wearing range had a large circle irrespective of rank and good or bad luck. This was a ordinary dress to the Emperor or the lords, a below court attire or a below sacrificial rites attire to the illustrious officials, and good luck dress to the common people. But this was a funeral rites attire or coming-of-age ceremony attire in domestic behaviour. In the times of Song dynasty, lots of confucian scholars had put on this simui because of Juhi's recommendation for domestic behaviour. This Simui had been put on through all the times of China and was the original text of all the dress. Especially the court attire and silkworm working dress of Empress, and the court attire and underwear court attire of Emperor is also made out of this Simui, therefore this is a origin of the ceremonial dress which formed into long coat. In Korea it is said that this Simui was brought in prior to the middle of Goryeo dynasty. But we can't tell the correct transmitted age. According to the following records in Goryeo History, "King had put on the Simui as a sacrificial rite attire in the times of Yejong". It is sure that this Simui was brought in prior to the times of Yejong. In fact, lots of confucian scholars had put on the Simui since the introduction of confucianism in the end of Goryeo dynasty and after that time this was taken by many confucian scholars through Yi dynasty. Korean Simui system was complied with Chinese system through confucian domestic behaviour, This was respected for court dress of confucian scholars, as it were, Chumri, (an ordinary dress of scholars), Nansam (a uniform of upper student), and Hakchangui (a uniform of confucian student). There are many deta about Simui system in the book of Yeki, chapter Okcho and Simui, and other many canfucian books. But we didn't demonstrate the theory about it till now. Especially there are diversifies of opinions about the phrase of "Sok Im Ku Byun" in Yeki. Simui was cut in separate and then was stitched together in one piece. Generally its shape had round sleeve and angled lapel, its length reaches to the anklebone. And it has a line around the lapel, the sleeve band, and the edge of skirt. It is called Simui because the body can be wrapped deeply in broad width and large sleeve. The Simui was made of white fine linen and was cut by the natural size of body. Every part of Simui had a profound meaning; the round sleeve in compliance with regulation can keep a courtesy when a walker moves his hands and the angled lapel like a carpenter's square in compliance with square keeps them front loosing their Justice and a string of the back also keeps them loosing from their righteousness and the flat lower part of Simui makes their heart and mind calm. This Simui was usually attendant on a head cover and belt made cloth, and black shoes. This thesis was made a study of documents and portrait from Yi dynasty, for the actual object was not obtained.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2006

The purpose of this study was to evaluate normalized jerk according to shoes, slope, and velocity during walking. Eleven different test subjects used three different types of shoes (running shoes, mountain climbing boots, and elevated forefoot walking shoes) at various walking speeds(1.19, 1.25, 1.33, 1.56, 1.78, 1.9, 2, 2.11, 2.33m/sec) and gradients(0, 3, 6, 10 degrees) on a treadmill. Since there were concerns about using the elevated forefoot shoes on an incline, these shoes were not used on a gradient. Motion Analysis (Motion Analysis Corp. Santa Rosa, CA USA) was conducted with four Falcon high speed digital motion capture cameras. Utilizing the maximum smoothness theory, it was hypothesized that there would be differences in jerk according to shoe type, velocity, and slope. Furthermore, it was assumed that running shoes would have the lowest values for normalized jerk because subjects were most accustomed to wearing these shoes. The results demonstrated that elevated forefoot walking shoes had lowest value for normalized jerk at heel. In contrast, elevated forefoot walking shoes had greater normalized jerk at the center of mass at most walking speeds. For most gradients and walking speeds, hiking boots had smaller medio-lateral directional normalized jerk at ankle than running shoes. These results alluded to an inverse ratio for jerk at the heel and at the COM for all types of shoes. Furthermore, as velocity increased, medio-lateral jerk was reduced for all gradients in both hiking boots and running shoes. Due to the fragility of the ankle joint, elevated forefoot walking shoes could be recommended for walking on flat surfaces because they minimize instability at the heel. Although the elevated forefoot walking shoes have the highest levels of jerk at the COM, the structure of the pelvis and spine allows for greater compensatory movement than the ankle. This movement at the COM might even have a beneficial effect of activating the muscles in the back and abdomen more than other shoes. On inclines hiking boots would be recommended over running shoes because hiking boots demonstrated more medio-lateral stability on a gradient than running shoes. These results also demonstrate the usefulness of normalized jerk theory in analyzing the relationship between the body and shoes, walking velocity, and movement up a slope.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.297-309
• /
• 2009

The study analyzed the mechanism of plantar foot pressure distribution during pitching wedge swinging on a flat, an up hill lie and a down hill lie to provide the fundamental information regarding biomechanical motion data by using plantar foot pressure measuring instrument. In the results, time factor spanning according to slope differences, plantar foot pressure factor and swing motion on the slope could have negative effect on the coiling of lower limbs during back swing, as well as the blocking of the lower limbs to minimize the dispersion of the weight and the release of the lower limbs after the impact during the down swing process. Moreover, since slope is one of many external factors affecting swing motion, address motion on an up hill lie limits the lower limbs movement, therefore, a relatively narrow stance is better on a down hill lie. It is estimated that a relatively wide stance would be better in order to limit the bigger activation of the lower limbs. Not only for the address motion but also during the down swing on an up hill lie it is concluded that the weight should be on the left foot in order to keep the body balance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.36-46
• /
• 1979

Using N_ Ch silicon gate technology . the capacitors and transistors with various dimenssion were fabricated. Although the applied process was somewhat standard the conditions of ion implantation for the gate were varied by changing the implant energies from 30keV to 60keV for B and from 100 keV to 175keV for P . The doses of the implant also changed from 3 $\times$ 10 /$\textrm{cm}^2$ to 5 $\times$ 10 /$\textrm{cm}^2$ for B and from 4$\times$ 10 /$\textrm{cm}^2$ to 7 $\times$ 10 /$\textrm{cm}^2$ for P . The D. C. parameters such as threshold voltage. substrate doping level, the degree of inversion, capacitance. flat band voltage, depletion layer width, gate oxide thickless, surface states, motile charge density, electron mobility. leakage current were evaluated and also compared with the corresponing theoretical values and / or good numbers for application. The threshold voltages measured using curve tracer and C-V plot gave good agreements with the values calculated from SUPREM II which has been developed by Stanford University process group. The threshold vol tapes with back gate bias were used to calculate the change of the substrate doping level. The measured subthreshold slope enabled the prediction of the degree of inversion The D. C. testing results suggest the realized capacitors and transistors are suited for the memory applications.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.183-191
• /
• 2020

In this study, in order to obtain basic data on the development of a new hanbok skirt pattern for developing a customizing system, a new hanbok brand skirt pattern was compared and analyzed. After analyzing the patterns of six new hanbok brands, virtual simulation was performed to evaluate the appearance, clothing pressure, and airgap. As a result of analyzing the waist skirt patterns of commercial new hanbok brands A, B, C, D, E, and F, it was found that they were produced in different dimensions despite the free size skirt of the same design. The pattern of new hanbok waist skirt was composed of a flat pattern like the traditional hanbok. As a result of appearance evaluation, it was evaluated that there were significant differences between the patterns of the six brands in all the evaluation items on the front, side, and back. In the appearance evaluation, it was evaluated that the waist skirt of the B brand was excellent. As a result of examining the color distribution and airgap, it was evaluated that the airgap was large in most parts due to the characteristics of the waist skirt worn around the waist, and the garment pressure was low. In this paper, we propose a basic data for standardizing dimensions and patterns according to activation New Hanbok. It is thought that a unified pattern development based on the B brand pattern should be made.