• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.3-12
• /
• 2020

Nowadays, as-is BIM generation has been popularly adopted in the architecture, engineering, construction and facility management (AEC/FM) industries. In order to generate a 3D as-is BIM of a structural component, current methods require a registration process that merges different sets of point cloud data obtained from multiple locations, which is time-consuming and registration error-prone. To tackle this limitation, this study proposes a registration-free 3D point cloud data acquisition technique for as-is BIM generation. In this study, small-size mirrors that rotate in both horizontal and vertical direction are used to enable the registration-free data acquisition technique. First, a geometric model that defines the relationship among the mirrors, the laser scanner and the target component is developed. Second, determinations of optimal laser scanner location and mirror location are performed based on the developed geometrical model. To validate the proposed registration-free as-is BIM generation technique, simulation tests are conducted on key construction components including a PC slab and a structural wall. The result demonstrates that the registration-free point cloud data acquisition technique can be applicable in various construction elements including PC elements and structural components for as-is BIM generation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.17-17
• /
• 2022

Leaves are an important organism for photosynthesis and transpiration. The shape of leaf is crucial factor affecting plant architecture. V-shape leaf rolling is enhancing canopy photosynthesis by increasing the CO₂ penetration and the light capture by reducing the shadow between the leaves. Therefore, moderate leaf rolling is thought to more high grain yield per area than flat leaf. We investigated 278 KRICE_CORE accession's Adaxial Leaf Rolling Index (LRI) in first heading using the following equation. For each accession, genomic DNA was used for sequencing. We sequenced the genomics with ~8 X coverage to detect SNPS. Raw reads were aligned against the rice reference (IRGSP 1.0) for SNP identification and genotype calling. To generate genotype data for GWAS, SNPs were filtered with minor allele frequency 0.05. Finally, 841,134 high-quality SNPs were used for our GWAS. The significant threshold was -log10(P)>7.23. From the results, 2 significance SNP were detected. Considering the LD block of 250kbp, 60 candidate gene were selected including Hypothetical gene and Conserved gene. In this poster, we analyzed candidate gene affecting adaxial Leaf Rolling through single-trait GWAS.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.243-243
• /
• 2022

Leaves are an important organism for photosynthesis and transpiration. The shape of leaf is crucial factor affecting plant architecture. V-shape leaf rolling is enhancing canopy photosynthesis by increasing the CO₂ penetration and the light capture by reducing the shadow between the leaves. Therefore, moderate leaf rolling is thought to more high grain yield per area than flat leaf. We investigated 278 KRICE CORE accession's Adaxial Leaf Rolling Index (LRI) in first heading using the following equation. For each accession, genomic DNA was used for sequencing. We sequenced the genomics with ~8 X coverage to detect SNPS. Raw reads were aligned against the rice reference (IRGSP 1.0) for SNP identification and genotype calling. To generate genotype data for GWAS, SNPs were filtered with minor allele frequency 0.05. Finally, 841,134 high-quality SNPs were used for our GWAS. The significant threshold was -log10(P) >7.23. From the results, 2 significance SNP were detected. Considering the LD block of 250kbp, 60 candidate gene were selected including Hypothetical gene and Conserved gene. In this poster, we analyzed candidate gene affecting adaxial Leaf Rolling through single-trait GWAS.

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.647-657
• /
• 2023

The study analyzes the forest status of each local government for Korean forests and believes that it can be used as basic data for setting the direction pursued by each local government. The study took into account the fact that the forest rate in Korea was 63.5%, because it was judged that the higher the proportion of forest area, the more important it was to use the characteristics of forests. The characteristics of forests were analyzed based on four factors in 12 factors to identify the location of the ground body by dividing seven types. In addition, basic information on carbon absorption sources was provided by grasping the ability of carbon absorption sources per year through the amount of forest resources to be analyzed. In addition, as a result of analyzing the characteristics of the weather for the promotion of carbon absorption sources, the flat area on the side of Gangneung Mountain was a warm forest with a warm index of 106.0.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.4
• /
• pp.1-14
• /
• 2008

Although the Dreamland site was the only flat amusement park in the northern part of Seoul, the site lost its function as a regional park due to aging and, therefore, was no longer in use. The site is surrounded by currently existing high dense low-story housing blocks and proposed new towns. A renovation plan for Dreamland was raised by the City of Seoul to enhance the quality of the urban environment in the northern part of Seoul. This study articulates the design concepts and strategies of the prizewinning work of the International Design Competition for Gangbuk Large Park. The three key points can be summarized as follows: First, this design proposal tried to find a new possibility for a large mountain park in an urban areas. These days, mountain parks are used limitedly as ordinary living spaces for activities such as a walking, hiking, and physical training. New strategies were sought to reconstruct the sentiment with which our ancestors enjoyed the mountains. Second, this proposal tried to make Dreamland a socially self-sufficient park. We designed a park which generates self-energy and which communicates with the city, not a park which only exists as a green island in a city. Lastly, rain fed paddy fields, a typical Korean vernacular landscape, was a tangible space which represented people's life-styles harmonizing with the nature. Rain fed paddy fields is a design motif which puts the three surrounding mountains together with the site. It is expected that the new design will works as a noted place.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.6
• /
• pp.67-77
• /
• 2019

The purpose of this study is to analyze how much particulate matter at the center of the urban park is reduced compared to the entrance of the park, where the particulate matter problem is serious. It also endeavored to analyze the relationship between the space closure rate and particulate matter reduction rate in the center of the park through the collection and analysis of experimental data. Seven flat land type urban neighborhood parks in Suseong-gu, Daegu were measured at the same place for three days. The research results are as follows. First, the center of the urban neighborhood park had an average temperature 1.05℃ lower than at the entrance and an average humidity of 2.57% higher. Second, the rate of fine dust reduction was PM1- 17.09%, PM2.5- 17.65%, PM10- 14.99%. As for the reduction rate of particulate matter, the smaller the size of the park, the greater the reduction rate. In addition, the reduction rate at the center of the park was lower on days when particulate matter concentration based on the weather reports was low. The higher the concentration at the park entrance, the higher the reduction rate was. Third, a higher the rate of space closures at the center of the park resulted in a higher effect of particulate matter reduction. Noting this, the relationship between particulate matter reduction and the space closure rate in urban neighborhood parks was clearly shown. We hope to be the basis for more extensive experimental data collection.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.11
• /
• pp.820-829
• /
• 2006

Wireless sensor networks consisting of hundreds to thousands of nodes are expected to be increasingly deployed in coming years, as they enable reliable monitoring and analysis of physical worlds. These networks have unique features that are very different from traditional networks, e.g., the numerous numbers of nodes, limitation in power, processing, and memory. Due to these unique features of wireless sensor networks, sensor data management including querying becomes a challenging problem. Furthermore, due to wide popularization of the Internet and its facility in use, it is generally accepted that an unattended network can be efficiently managed and monitored over the Internet. In particular, in order to more efficiently query and manage data in a sensor network. in this paper, the architecture of a sensor gateway including web-based query server is presented and its implementation detail is illustrated. The presented web-based gateway is largely divided into two important parts: Internet part and sensor network part. The sensor network part plays an important role of handling a variety of sensor networks, including flat or hierarchical network architecture, by using internally layered architecture for efficiently querying and managing data in a sensor network. In addition, the Internet part provides a modular gateway function for favorable exchange between the sensor network and Internet.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.58-65
• /
• 2015

Compared to pavement of Chinese palace gardens, those of private gardens in south part of the Yangtze River(長江) in China shows variety of patterns. In order to figure out what causes the difference in paving pattern, this article focuses on the traditional Chinese ideologies during the all time. An analysis on 'Classical Gardens of Suzhou', which has been designated as UNESCO World Heritage, was used to determine how ideologies have influence on paving pattern of Classical Gardens. As a result, various Chinese ideologies such as Nature worship, Totemism, Confucianism, Taoism, Buddhism, and Folk Culture were found in paving patterns of the private gardens. Pattern of sun in the Retreat & Reflection Garden(Toisawon) is an example of Nature worship among primitive beliefs of ancient China. Phoenix pattern of the Couple's Retreat Garden(Ouyuan, Liuyuan) reflects Totemistic beliefs. Confucianism is the underlying philosophy of Eight Square pattern, Six Square pattern, and Cross Square pattern. These patterns were mainly used to pave large area and easily found in many gardens. Patterns reflect Taoism are "Wufu holding life" pattern(the Five blessing holding life, 五福捧壽), Flat peach pattern, and Alluding Eight Immortals pattern. Paving patterns related to Buddhism are patterns of 'Eight treasures' and Endless knot pattern appears most frequently since it expresses concept of reincarnation well. Paving patterns shows folk culture and beliefs of the time in China are bat, butterfly, dragonfly, frog, carp, and coin(ingot).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.112-121
• /
• 2017

Large eddy simulations of transitional flows around a stud installed on a flat plate have been performed to investigate an influence of grid resolution on turbulence stimulation by the stud. Because streamwise vortical structures generated by the stud played an important role in turbulence stimulation of boundary layer, streamwise vorticity was compared in the wake region behind the stud when the number of grids increased or decreased by a ratio of ${\sqrt{2}}$ in streamwise, wall-normal and spanwise directions respectively. The streamwise vorticity was shown to be mainly affected by spanwise grid resolution (${\Delta}z^+$) rather than streamwise and wall-normal grid resolution. In a viewpoint of numerical efficiency as well as physical resolution, ${\Delta}x^+{_{min}}=7.6$, ${\Delta}x^+{_{max}}=41$, ${\Delta}y^+{_{wall}}=0.25$ and ${\Delta}z^+=7.6$ was found to be desirable. Once a grid resolution was determined in each direction, a grid verification was carried out by increasing or decreasing the grid resolution y a ratio of ${\sqrt{2}}$ in all directions. The grid uncertainties of pressure and drag coefficients were 21.6 % and 2.8 % while the corrected uncertainties were 2 % and 0.3 %, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.528-538
• /
• 2011

As a forming method for curved hull plates more efficient than the flame bending, mechanical bending using multi point press forming and die-less forming is discussed in this paper. the mechanical forming is a flexible manufacturing system for automatically forming of hull parts. It is especially suited to varied curved parts. This paper discusses a multiple point pressing machine composed of a pair of reconfigurable punches in order to achieve the rapid forming of curved hull plates using division forming and presents how forming information is obtained from the given design surface. Although the mechanical forming can be efficient in the metal forming, spring back after pressing is a phenomenon which must be carefully considered when quantifying the process variables. If the spring back is not accurately controlled, the fabricated shell plate cannot meet assembly tolerance. This paper describes the principles to calculate the proper stroke of each punch at the divided areas. the strokes are determined by an iterative process of sequential pressing and spring back compensation from an unfolded flat shape to its given design surface. FEA(finite element analysis) is used to simulate the spring back of the plate and the IDA(iterative displacement adjustment) method adjusts the offset of pressing punches from the deformation results and the design surface. The shape deviations of two surfaces due to spring back are compensated by integrated system using FEA and IDA method. For the practical application, It is aimed to develop an integrated system that can automatically perform the compensation process and calculate strokes of punches of the double sides' reconfigurable multiple-press machine and some experimental results obtained with mechanical bending are presented.