• Journal of the Korean Society of Costume
• /
• v.34
• /
• pp.67-78
• /
• 1997

We executed the wearing test in order to revise the basic Beosun pattern for five kinds of foot type. And we took sensory test to evaluated that revisions. The result were as follows: 1. The characteristics of slender foot is that the foot circumference III is short as compared with foot length. So Kou of basic Beosun is sharp-pointed Hoimok and beosunmok are broad. For slender foot we took down ou of Beosun and use foot cir-cumference III/2-1.5cm as Hoimok like the part shown in dotted line of Fin 6. 2. The characteristics of broad foot is that the foot circumference III is long as comparison with foot length. So Kou of ba-sic Beosun is stubby Hoimok and Beosunmok are narrow. For broad foot we took up Kou of Beosun put foot circum-ferenceI /2-1.5cm for the width of Apbol and circumfernce III 2/-1.5cm for Hoimok like the part shown in dotted line of Fig. 8. 3. because the arch of flat foot is flat the sole of basic Beosun is not suitable to the flat foot. It developes on wrinkles of Duichuk and sole. For flat foot we took down Hom of the basic Beousun like the part shown in dotted line of Fig. 10. 4 We evaluated the revisions of basic Beousun for foot types were useful in senso-ry test.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.55-62
• /
• 2013

An analytical procedure to determine a proper profile of the spring rail that generates intended contact pressure distribution in the flat wiper blade is introduced. The flat wiper blade is one piece blade and subjected to pressing force at a center point. In this type of blade, contact pressure distribution in the tip of rubber strip is determined by the pressing force, the initial profile of the blade before contact and bending stiffness of the blade. Experimentally obtained bending stiffness of the blade assembly is almost identical to that of the spring rail. Principle of reciprocity has been used to define the initial profile of spring rail from the deformed profile that is assumed to be identical to the windshield glass profile. The procedure has been verified experimentally by measuring the contact pressure of the blade assembled with the spring rail designed by the procedure proposed here. Measured contact pressure distributions of the blades show good agreements with intended distributions over the entire blade span. Consequently, it can be concluded that proposed procedure has relatively good accuracy in developing the spring rail for flat blade having a specific contact pressure distribution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.822-833
• /
• 2011

A Xe plasma flat lamp, which has been noticed as a new eco-friendly LCD (liquid crystal display) backlight, requires the improvement of the luminance and the luminous efficiency although it has several advantages. To improve the performance of a lamp, it is necessary to understand the effects of discharge variables on the luminous characteristics of the lamp. Since it is difficult to diagnose a lamp discharge experimentally, the numerical analysis can be used instead. In this study, the luminous characteristics of a planar type Xe plasma flat lamp were analyzed with the variation of an input voltage and a pulse frequency. The numerical analysis of a lamp discharge was then performed using a RCT (relaxation continuum) model and a LFA (local field approximation) model. The comparison with the experimental results showed that the RCT model is valid for the numerical analysis of the flat lamp. The numerical analysis also showed that the modifications of a high frequency component and a voltage falling rate in the input voltage waveform could improve the luminous characteristics of the lamp.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.349-356
• /
• 2011

This research is aim to analyze of changing landscape and according to phenological cycle from image information of coastal environment obtained by multi-media were analyzed by camera and satellite image. The digital camera and satellite image were used for tidal flat vegetation monitoring during the construction of Sihwa lake. The vegetation type and phenological cycle of Sihwa tidal flat have been changed with the Sihwa lake ecosystem. The environment changes of Sihwa tidal flat area and ecological change were analyzed by field work digital camera images and satellite images. The airborne, UAV and satellite images were classified with the changed elements of coastal ecological environment and tidal flat vegetation monitoring carried out the changed area and shape of vegetation distribution with time series images.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.133-140
• /
• 2017

The purpose of this study is to provide a basic data of clothing development that can improve the satisfaction of the body shape by examining the subjective evaluation and characteristics of each type. The types of body shape of middle-aged women were analyzed as four types: elasticity loss ladder type, flat rectangular type, thin reverse ladder type, and upper body obesity inverted triangle type. The elasticity loss ladder type was developed with the lower body, and it was analyzed that the legs size such as the thighs and claves were large, the abdomen was protruded, and especially the underbelly appeared. The flat rectangular type was the largest of the four types, and was the skinny type. The width was larger than the thickness of the body, and the difference between the hip circumference and the waist circumference was small, and it was classified into a flat rectangular shape. The thin reverse ladder type was the smallest of the four types, the upper body was developed, the back had weight, and the body was leaning forward. And the lower body and leg were poor and the abdomen was protruding. Finally, the upper body obesity inverted triangular was the highest type of BMI index among 4 types. All of subjects belong to the mild and middle obesity, and the second was the smallest but the most weighted type among 4 types. They had the fat body and big bust, the upper body was developed, and the lower body and legs were analyzed to be poor body shape. Based on the body shape of middle-aged women, it is necessary to develop designs and patterns that can cover the shortcomings of body shape.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.188-196
• /
• 2009

In Concrete, shrinkages occur like plastic shrinkage and drying shrinkage in the early age because of evaporation and transfer of moisture. Within the country, the crack test standardized by KS is used to test the drying shrinkage of the concrete by using the restricted drying shrinkage of Dumbbell type mold, but this test is for the cracking-point and the restricted shrinkage stress. Thus it is difficult to valuate the crack quantitative test. In this study, it is intended to develop the Flat-ring type restrained test method for the shrinkage deformation movement of the concrete and to provide the quantitative data for evaluating the cracks in concrete. And it suggest the proper specimen diameter and quantitative test method about shrinkage crack properties on Flat-ring type restrained test method. And Verified the suitability.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.33-38
• /
• 2015

In this study, flat-type photocatalytic reaction system is applied to reduce toxic hexavalent chromium (Cr(VI)) to trivalent chromium (Cr(III)) in aqueous solution under UV irradiation. To overcome the limitation of conventional photocatalysis, a novel approach toward photocatalytic system for reduction of hexavalent chromium including nanotubular $TiO_2$ (NTT) on two kinds of titanium substrates (foil and mesh) were established. In addition, modified Ti substrates were prepared by bending treatment to increase reaction efficiency of Cr(VI) in the flat-type photocatalytic reactor. For the fabrication of NTT on Ti substrates, Ti foil and mesh was anodized with mixed electrolytes ($NH_4F-H_2O-C_2H_6O_2$) and then annealed in ambient oxygen. The prepared NTT arrays were uniformly grown on two Ti substrates and surface property measurements were performed through SEM and XRD. Hydraulic retention time(HRT) and substrate type were significantly affected the Cr(VI) reduction. Hence, the photocatalytic Cr(VI) reduction was observed to be highest up to 95% at bended(modified) Ti mesh and lowest HRT. Especially, Ti mesh was more effective as NTT substrate in this research.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.6
• /
• pp.624-634
• /
• 2003

The purpose of this study was to classify body types of elderly male aged between 60 and 80. 40 direct items and 22 indexes were measured. The result were as follows. First. through the factor analysis of indexes, 8 factors were extracted upon factor scores, 4 clusters represented characteristics of elderly male's body type. Type 1 indicates flat and bend-forward type. Type 2 indicates fat and bend-forward type. Type 3 indicates lean-back type and is a little bit fat and the waist is round. Type 4 indicates a straight type in which the chest and the hip are developed. Second, drop was needed to discriminate elderly male's body type. 3 types of drop were extracted. The body type with big drop is Y type in which the drop distance is between 14 and 22cm. The body type with standard drop is A type in which the drop distance is between 6 and 14cm. The body type with small drop is B type in which the drop distance is between -4 and 6cm. Third, when the types of appearance rate were combined, 7 body types of elderly male showed high appearance rate; A1, B1, A2, B2, A3, A4, B4. According to the above result, flat and bended-forward type with drop A was dominant body type of elderly male.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.966-971
• /
• 2008

Free-piston engine system is a new type energy converter which uses a linear motion of piston by using linear generator. In free-piston engine system, the piston is not connected to a crank-shaft. The major advantages of free-piston engine system are high efficiency and low mechanical loss from the absence of motion conversion devices. Linear generator of free-piston engine system is used as generator and starting motor. In design step, considering of back-emf and detent force characteristics for generating mode and thrust and control characteristics for starting mode is needed. In this research, generating mode of flat-type linear generator and tubular-type linear generator is analyzed by finite element analysis method and starting mode of both type linear generators is analyzed by using capability curve. Capability curve is plotted from electrical parameters of both type linear generator and motion profile is calculated from mechanical parameters.

• Journal of the Korean Mathematical Society
• /
• v.41 no.2
• /
• pp.379-396
• /
• 2004

In this article, we study rotation surfaces in the 4-dimensional pseudo-Euclidean space E$_2$$^4$. Also, we obtain the complete classification theorems for the flat rotation surfaces with finite type Gauss map, pointwise 1-type Gauss map and an equation in terms of the mean curvature vector. In fact, we characterize the flat rotation surfaces of finite type immersion with the Gauss map and the mean curvature vector field, namely the Gauss map of finite type, pointwise 1-type Gauss map and some algebraic equations in terms of the Gauss map and the mean curvature vector field related to the Laplacian of the surfaces with respect to the induced metric.