• Journal of the Korean Geosynthetics Society
• /
• v.15 no.3
• /
• pp.77-85
• /
• 2016

This study was conducted to solve the problem such as damage of completed compaction ground using the conventional compaction control method. In this study, a TDR system equipped with a flat type probe has been developed. Also, the Piezoelectric stack, which is an instrument for measuring the elastic wave on the ground, has been added to the developed flat type probe. In this study, the strength variation of reinforced soil with time was determined by using the TDR system. The value of compression and shear modulus increased from 198.65MPa to 541.80MPa and from 125.55MPa to 302.02MPa with time, respectively. Based on the test results, it has been confirmed that the developed TDR system can be used as reinforced effect analysis of soil and compaction control.

• Journal of the Korean Society of Costume
• /
• v.65 no.6
• /
• pp.1-14
• /
• 2015

This study is aims to study the background of how the shape of the wooden shoes developed and worn by Koreans and Japanese in the ancient times by sorting and examining the types and shapes. Relevant bibliography, which are mainly related to the excavated wooden shoes from 3 B.C.E to C.E. 8., were used as research materials. The formation of wooden shoes required easy access to raw materials -which is trees- for production. According to the analysis, both Korea and Japan made the flat wooden shoes using cuboid wood. Both countries bore a hole on a specific location to distinguish the right foot and left foot, however the style of the heel was different in the two countries. The slip-on(Undu-hyeong) wooden shoes were also common in both countries. The slip-on had no-heels and was made by digging-out a piece of the cuboid wood. Some slip-ons made by the Japanese had furrows on the bottom, and they were known to make different types of the slip-on wooden shoes depending on the purpose. Observation of the wearing methods show that commonality can be found between the wooden shoes of Korea and Japan, and this indicates that cultural exchanges between the Silla/Baekje and Japan took place from the 4th to the 6th century. Also, the flat wooden shoes in Japan developed rapidly, as the shoes became an integral part of its life and culture, which was closely tied to agriculture. Eventually, due to the difference in climate and life-style, the slip-ons became the primary type of wooden shoes in Korea, while the flats became the main type of wooden shoes in Japan. It is, however, clear that as the relationship between the two countries became closer, the cultural exchanges regarding the wooden shoes were considerable.

• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.427-441
• /
• 2005

In order to choose proper dispersion model and emission factors suitable in Korea in evaluating the effect of pollutants emitted by the vehicles in highway on nearby area, various road dispersion models and vehicle emission factors were reviewed. With theoretical inter-comparisons of the exiting models for line source, CALINE 3 and CALINE 4 models which were suggested by US EPA were selected as the road dispersion models for further evaluation with the measurement. The emission factors suggested by Korean Ministry of Environment was turned out to be appropriate since the classification of vehicle kinds was simple and easy to apply in Korea. The comparisons of predicted concentrations by CALINE 3 and 4 models with the measurements in flat, fill and bridge road types showed that CO and PM-10 were in good agreements with experiments and the differences between CALINE 3 and 4 models are negligible. The model concentrations of $NO_2$ by CALINE 4 were also in good agreement with the measurement but those by CALINE 3 were over-predicted. The discrepancies in CALINE 3 model were due to rapid decay reaction of $NO_2$ near the highway, which was not included in CALINE 3 model. For the road type with one & two side cutting grounds, the similar patterns as the flat & fill road type for CO, PM10, & $NO_2$ were observed but the number of data for comparison in these cases were not enough to draw the conclusion. These results lead to the conclusion that CALINE4 model is proper in road environmental impact assessment near the highway in flat, fill and bridge road types.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.320-326
• /
• 2015

In this study, permeation experiments were carried out using the symmetric and asymmetric sinusoidal flux continuous operation (SFCO) modes for the submerged flat sheet membrane in the 0.5 wt% emulsion type cutting oil solution. The effective area and nominal pore size of the used microfiltration membrane were $0.02m^2$ and $0.15{\mu}m$, respectively. The emulsion cutting oil was rejected over 99% based on turbidity. Transmembrane pressure increased lower as the aeration rates increased. The symmetric SFCO mode was a little more effective than the symmetric SFCO mode in low permeate flux between 10 and $15L/m^2{\cdot}h$. However, the symmetric SFCO mode was shown very effectively in high permeate flux between 25 and $30L/m^2{\cdot}h$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1823-1829
• /
• 2012

Rice noodles are popular worldwide; however, no standard procedure is available for screening the potential for rice flour to make good quality noodles. This study reports two standard laboratory-scale procedures for preparing flat (sheet type) and extruded noodles. Eight rice cultivars were examined and the cooking loss and tensile strength of cooked noodles were determined. It was relatively easy to control the amount of water added to extruded noodles, whereas flat noodles were very sensitive to the amount of water used. Sheet formation was determined based on the amount of moisture content during preparation, and the Chenmaai cultivar was found to be most appropriate for both noodles making procedures and cooking and textural properties. Finally, good noodle making cultivar such as Chenmaai was less likely to be affected by the milling method.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.249-256
• /
• 2015

Objective : The purposes of this study was to perform a kinematical analysis on age and walkway types in elderly women subjects. Method : Forty subjects participated in the experiment (A1 group - age: $67.30{\pm}1.49yrs$, height: $153.81{\pm}4.47cm$, weight: $61.80{\pm}5.24kg$, A2 group - age: $71.70{\pm}1.10yrs$, height: $152.01{\pm}2.84cm$, weight: $59.69{\pm}7.34kg$, A3 group - age: $76.80{\pm}0.98yrs$, height: $150.16{\pm}6.08cm$, weight: $57.27{\pm}6.42kg$, A4 group - age: $81.80{\pm}0.60yrs$, height: $152.18{\pm}4.77cm$, weight: $55.80{\pm}7.78kg$). The study method adopted was the 3D analysis with six cameras. Ground type were classifed as gait pattern on flat, ascent and descent ramp. For the statistical analysis, the SPSS 21.0 was used to perform Repeated measured Two-way ANOVA. Results : In velocity of CM, there was faster movement on flat ground. When it came to the velocity of right toe, there was no significance in early mid-swing of right foot, but A4 was the slowest in late mid-swing of right foot on flat ground. In joint angle in left foot strike, the left hip joint and knee joint were more flexed in descent ramp, In addition left and right ankle joints were more plantarflexed in descent ramp, and left ankle joint was more plantarflexed in the over 75 yrs age groups. Conclusion : The higher age group were more flexed in lower body joints during descent ramp.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.74-80
• /
• 2008

This paper evaluates seismic capacities of slab-column joints in flat plate system which has columns with various aspect ratio as experimental parameters. Continuous - bended shear reinforcements were applied for the prevention of punching shear failure in this study. The specimens of FIS1-05, FIS1-10, and FIS1-20 have the aspect ratio of 0.5, 1.0, and 2.0 respectively. Static lateral force was applied to the specimens in a horizontal direction and vertical load was applied by constant gravity load ratio. The test results were evaluated by lateral displacement and strength of slab-column joint. Consequently, the lateral resisting capacity of rectangular type column such as FIS1-05, FIS1-20 is superior to the square type column such as FIS1-10.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.51-58
• /
• 2022

Flat plate slab is cost-efficient structural system widely used in high rise building, apartment and parking garages. But flat plate-column connections are so weak against punching shear failure that it may cause collapse of overall structure. In this study, spiral type shear reinforcement which increases the shear strength and ductility of the plate-column connection and has good workability was proposed. And experimental test was performed to verify the punching shear capacity of spiral type shear reinforcement. The current code does not accurately estimate the punching shear strength of slab-column connection with shear reinforcement because slab is so slender that punching failure may occurred before shear reinforcement reached yield stress. Therefore modified equation of ACI code for punching shear strength was proposed base on finite element analysis using LUSAS program, and data analysis from CEB-FIP database.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.2
• /
• pp.211-223
• /
• 2018

In global apparel product development, flat is one of the most important key factor for technical design communication. Proportionally correct flats based on correct scaled human body figures are imperative to be successful in the fashion business. In this study the researchers were to develop body templates for flats for Korean women body types using data from 'Size Korea 2004 (5th)', which is a Korean government apparel sizing project to analyze women's body measurements (age range 7-49). We measured 13 height measurements, 6 width measurements, 8 circumference measurements, 6 length measurements, 3 angle measurements and 5 body measurements. A body figure (i.e., schema) for each group was created by Pattern Design Software (PAD) System 4.1. Muscle was added to the schema created by Adobe Illustrator to ensure a better visualization and convenience for industry uses for flats. Developed body figure template of representative type had the largest difference in height level compared to exiting figures. It had a bigger head, lower crotch level, and longer crotch depth and hip length than existing figures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.1-11
• /
• 2004

An experimental study was carried out to investigate the influence of flow conditions of a boundary layer on the near-wake of a flat plate. Various attaching positions of tripping wires were selected to change flow conditions on a boundary layer. Laminar, transitional, and turbulent boundary layer conditions at 0.98C from the leading edge are imposed to investigate the evolution of symmetric and asymmetric wake. An x-type hot-wire probe(55P61) is employed to measure at 8 stations of the near-wake region. Measured mean velocity distributions are presented in terms of similarity parameter. It is found that the symmetric wake collapses well to the universal profile in the central part of the wake. However, the universal profile is not suitable in describing an asymmetric wake.