• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.14-21
• /
• 2017

PURPOSE. The aim of this study was to compare the retention of mini implant overdenture by the number, the type of magnetic attachment, and the directions of applied dislodging force. MATERIALS AND METHODS. The experimental groups were designed by the number and type of magnetic attachment. Twenty samples were tested with Magden implants. Each attachment was composed of the magnet assembly in overdenture sample and the abutment keeper in a mandibular model. Dislodging forces were applied to the overdenture samples (50.0 mm/min) in 3 directions. The loading was repeated 10 times in each direction. The values of dislodging force were analyzed statistically using SPSS at 95% level of confidence. RESULTS. The retentive force of group 2 was greater than that of group 1 in both types of attachment in every direction (P < .05). Oblique retentive force of flat type magnetic attachment was higher than that of cushion type attachment in both groups (P < .05). In group 1, oblique retentive force showed the highest and anterior-posterior retentive force showed the lowest value in both attachment types (P < .05). In group 2, both types of attachment showed the lowest retentive force with anterior-posterior direction of dislodging force (P <.05). CONCLUSION. Proper retentive properties for implant overdenture were obtained, regardless of the number and type of magnetic attachment. In both types of magnetic attachment, the greater retentive force was attained with more implants. Oblique retentive force of flat type magnetic attachment was greater than that of cushion type. Among all subgroups, anterior-posterior retentive force was the lowest among three different directions of dislodging force.

• 대한수학회지
• /
• 제55권2호
• /
• pp.293-311
• /
• 2018

We study the homotopical minimal periods for maps on infra-solvmanifolds of type (R) using the density of the homotopical minimal period set in the natural numbers. This extends the result of [10] from flat manifolds to infra-solvmanifolds of type (R). We give some examples of maps on infra-solvmanifolds of dimension three for which the corresponding density is positive.

• 천문학논총
• /
• 제18권1호
• /
• pp.1-9
• /
• 2003

In the framework of linear perturbation theory and linear approximation of spacetime anisotropy, we investigated the formulae for the CMBR temperature anisotropy and fluctuation spectrum which have their origin in the primordial tensor perturbations of the perturbed Bianchi type I universe model. The resulting formulae were compared with those of the flat Friedmann model.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.407-419
• /
• 2014

잣나무, 리기다소나무, 낙엽송, 백합나무 등 수종과 두께가 다른 평단판 및 단판롤(롤 형태의 단판)을 고정형 마이크로파로 가열하여 가열 전후 형상, 표면 함수율, 함수중량 변화와 표면 열분포를 분석한 결과는 다음과 같다. 평단판의 경우 마이크로파 가열에 따른 품질상태는 비교적 양호한 것으로 나타났지만, 약간의 뒤틀림이 발생하였으며, 이는 비균일 건조응력에 따른 변형과 고정형 마이크로파 장비의 특성상 단판 형태로 가열 시 국부적인 조사가 이루어진 영향이 컸기 때문으로 판단된다. 단판롤 형태의 마이크로파 가열 특성은 가열 후 품질 모두 양호하였으며, 특히 평단판에서 나타난 뒤틀림 등의 결함은 없는 것으로 나타났다. 또한 열분포 및 확산 등이 매우 안정적으로 이루어진 것으로 판단되며, 이러한 열분포는 표면 함수율 분포 및 함수중량 감소에 많은 영향을 미치는 것으로 나타났다. 따라서 단판롤 형태는 수종 및 두께에 따라 출력과 조사시간 등 충분한 시험이 실시된다면, 고정형 장비에서도 충분한 건조효율을 나타낼 수 있을 것으로 판단된다.

• 한국측량학회지
• /
• 제38권1호
• /
• pp.69-83
• /
• 2020

간판은 보행자의 안전과 도심의 재난 예방을 위해 국가법령에 따라 간판의 규격이 정해져 있다. 간판은 규격에 따라 설치되어야 하지만 오랜 기간 동안 설치되어온 다수의 간판과 빈번하게 변화하는 점포로 인해 간판을 체계적으로 관리하기가 수월하지 않다. 이에 본 연구에서는 규격에 어긋나는 간판을 판별하는 방법론을 제안하였다. 이를 위해, 스테레오 카메라를 이용하여 간판을 촬영한 후 영상에서 간판의 3차원 좌표를 결정하여 간판의 가로와 세로 크기를 계산하여 간판의 규격을 판별하였다. 스테레오 카메라의 내부표정요소와 상호표정요소를 결정하기 위해서 실외의 3차원 건물을 검정장으로 사용하였다. 그리고 나서 약 15m ~ 22m 거리에서 촬영한 간판 영상에서 딥러닝을 이용하여 간판의 네 꼭지점에 대한 영상좌표를 추출하였다. 스테레오 카메라의 내부표정요소와 상호표정요소 그리고 간판의 네 꼭지점에 대한 영상좌표를 이용하여 간판의 3차원 좌표를 결정한 후 간판의 가로 및 세로 크기를 계산한 결과 평균적으로 약 2.7cm의 오차가 있었다. 10개의 판류형 간판에 대한 규격을 살펴본 결과 가로 크기는 모두 규격을 준수하였으나, 세로 크기는 평균적으로 약 36.5cm를 초과하였다. 이를 통해 판류형 간판의 정비가 필요한 것을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2139-2146
• /
• 2023

During reactor operation, the divertor must withstand unprecedented simultaneous high heat fluxes and high-energy neutron irradiation. The extremely severe service environment of the divertor imposes a huge challenge to the bonding quality of divertor joints, i.e., the joints must withstand thermal, mechanical and neutron loads, as well as cyclic mode of operation. In this paper, potassium-doped tungsten (KW) is selected as the plasma facing material (PFM), oxygen-free copper (OFC) as the interlayer, oxide dispersion strengthened copper (ODS-Cu) alloy as the heat sink material, and reduced activation ferritic/martensitic (RAFM) steel as the structural material. In this study, a vacuum brazing technology is proposed and optimized to bond Cu and ODS-Cu alloy with the silver-free brazing material CuSnTi. The most appropriate brazing parameters are a brazing temperature of 940 ℃ and a holding time of 15 min. High-quality bonding interfaces have been successfully obtained by vacuum brazing technology, and the average shear strength of the as-obtained KW/Cu and ODS-Cu alloy joints is ~268 MPa. And a fabrication route for manufacturing the flat-type divertor target based on brazing technology is set. For evaluating the reliability of the fabrication technologies under the reactor relevant condition, the high heat flux test at 20 MW/m² for the as-manufactured flat-type KW/Cu/ODS-Cu/RAFM mockup is carried out by using the Electron-beam Material testing Scenario (EMS-60) with water cooling. This paper reports the improved vacuum brazing technology to connect Cu to ODS-Cu alloy and summarizes the production route, high heat flux (HHF) test, the pre and post non-destructive examination, and the surface results of the flat-type KW/Cu/ODS-Cu/RAFM mockup after the HHF test. The test results demonstrate that the mockup manufactured according to the fabrication route still have structural and interfacial integrity under cyclic high heat loads.

• 한국지역지리학회지
• /
• 제3권2호
• /
• pp.195-208
• /
• 1997

1910년대 지형도와 1990년대 지형도 및 위성영상을 기본도로 하여 한국의 각 지역별 간석지 분포와 간척 현황을 GIS로서 계량하고 지역별 간석지 발달조건을 고찰했다. 그 결과 우리나라 간석지 자원은 1910년대 이후 간척된 것을 포함하여 약 $3,800km^2$이고 전남 서해안, 경기만, 아산만, 전남남해안, 군산만, 천수만, 경남부산해안 순으로 넓게 형성되어 있으며, 현재 공사중인 것까지 합하면 50% 이상 간척되고 있다. 간석지 발달조건의 측면에서 경기 아산만은 모든 조건이 고루 갖추어져 있고, 군산만은 육상퇴적물 공급체계가, 전남 해안은 해안선 조건이 각각 두드러지게 양호하여 간석지가 발달했다. 군산만을 사례로 간석지 발달의 경년변화를 살펴본 결과 간석지 모양은 계속 변해가고 있으며, 면적이 조금씩 늘고 있다. 그러나 20C 전반부에는 면적증가율이 비교적 높은 데 비하여 후반부에는 훨씬 낮아져 거의 정체상태에 있는 것으로 나타났다.

• Imaging Science in Dentistry
• /
• 제37권4호
• /
• pp.205-209
• /
• 2007

Purpose: To determine the physical properties of a newly developed cone beam computed tomography (CBCT). Materials and Methods: We measured and compared the imaging properties for the indirect-type flat panel detector (FPD) of a new CBCT and the single detector array (SDA) of conventional helical CT (CHCT). Results: First, the modulation transfer function (MTF) of the CBCT were superior to those of the CHCT. Second, the noise power spectrum (NPS) of the CBCT were worse than those of the CHCT. Third, detective quantum efficiency (DQE) of the indirect-type CBCT were worse than those of the CHCT at lower spatial frequencies, but were better at higher spatial frequencies. Although the comparison of contrast-to-noise ratio (CNR) was estimated in the limited range of tube current, CNR of CBCT were worse than those of CHCT. Conclusion: This study shows that the indirect-type FPD system may be useful as a CBCT detector because of high resolution.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.105-121
• /
• 2006

Body measurement was first made with the subjects of 193 males in their 20s residing in the Ningbo area, Zhejiang Province in China. In this first report, lower body shapes were classified and discriminated by using anthropometric measurement indices and lower body analysis. The following sums up the research: 1. Compared with the average values of Korean males in their 20s, the Chinese subjects were characterized with thinner waist, more flat hip, and smaller midthigh. 2. The subjects of Chinese males in their 20s showed three types of lower bodies: H-Round Type (25.91%)-thick waist-abdomen, round cross-section waist-abdomen, and small waist-hip difference. A-Trapezoid Type (34.72%)-small width of omphalion waist-abdomen, average cross-section waist-abdomen, and large waist-hip difference. A-Balance Type (39.38%)-average width of omphalion waist-abdomen, flat cross-section waist-abdomen, and large waist-hip difference. 3. Seven useful variables for the categorization of the subjects' lower body types were chosen through stepwise discriminant analysis, and the hit ratio of discrimination was 96.89%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2227-2229
• /
• 1999

As a direct-view flat panel displays, there are many devices, such as plasma display panels(PDPs), vacuum fluorescent displays (VFDs), and light emitting diode(LED). Among these, a PDP is the first type of panel display to be made commercially available. A 'Plasma display' is the general term for a flat display utilizing the light emission that is produced by gas discharge. However, the brightness and Luminous efficiency are still not adequate for consumer television. So, the new sustain electrode type of ac PDP was proposed. By arranging the transparent electrode of quadrangle by zigzag, the area of electrode are reduced, and the length of electrode gap is increased. It generates a high luminous efficiency(corresponding to a 40% improvement of standard type), the same discharge voltage characteristics, and the low power consumption at same luminance.