• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제22권4호
• /
• pp.629-634
• /
• 2013

This study aims to investigate a new structure for a concentrating photovoltaic (PV) module using a III-V compound semiconductor solar cellto solve the problems of existing concentrating PV modules and to explore a concentrating optical system with a flat structure, which shows remarkable advantages in terms of manufacturing cost, installation, and maintenance. This study should greatly contribute toward the development of concentrating PV modules. This study was performed to achieve an improvement in efficiency and economy and to implement an actual product. A new source of renewable energy is the only way in which countries that cannot produce oil can even emerge as an energy power. Therefore, this work can serve as a fundamental study that will help South Korea grow into a country that is a PV power generation force.

• Mass Spectrometry Letters
• /
• 제7권4호
• /
• pp.91-95
• /
• 2016

In recent years, matrix-free laser desorption ionization (LDI) for mass spectrometry of thermally labile molecules has been an important research subject in the pursuit of new ionization methods to serve as alternatives to the conventional matrix-assisted laser desorption ionization (MALDI) method. While many recent studies have reported successful LDI of thermally labile molecules from various surfaces, mostly from surfaces with nanostructures, understanding of what drives the LDI process still requires further study. This article briefly reviews the thermal aspects involved in the LDI mechanism, which can be characterized as rapid surface heating. The thermal mechanism was supported by observed LDI and postsource decay (PSD) of peptide ions produced from flat surfaces with special thermal properties including amorphous Si (a-Si) and tungsten silicide ($WSi_x$). In addition, the concept of rapid surface heating further suggests a practical strategy for the preparation of LDI sample plates, which allows us to choose various surface materials including crystalline Si (c-Si) and Au tailorable to specific applications.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.933-935
• /
• 2003

Geo-scientifically viable, environmentally suitable, and socially acceptable sanitary landfill sites are very limited in the Kathmandu Valley and is confronted with the burning problem of safe disposal of urban waste. This paper deal with the evaluation and assessment of its interface, following the major criteria defining suitable geological barrier, Cation Exchange Capacity and other necessary physical parameters with the optimum utilization of remotely sense data along with GIS techniques. The study revealed one of the most viable sites at the flat land of natural depression of Taikabu area and has potential to serve all the municipalities of the Kathmandu Valley.

• Advances in nano research
• /
• 제12권3호
• /
• pp.263-279
• /
• 2022

In this research, the physical education training quality was investigated using the entropy model to compute variance associated with a random value (a strong tool). The entropy and undefined estimation principles are used to extract the greatest entropy of information dependent on the index system. In the study of tennis motion tracking from a dynamic viewpoint, such stages are utilized to improve the perception of the players' achievement (Lv et al. 2020). Six female tennis players served on the right side (50 cm from the T point). The initial flat serve from T point was the movement under consideration, and the entropy was utilized to weigh all indications. As a result, a multi-index measurement vector is stabilized, followed by the confidence level to determine the structural plane establishment range. As a result, the use of the unascertained measuring technique of information entropy showed an excellent approach to assessing athlete performance more accurately than traditional ways, enabling coaches and athletes to enhance their movements successfully.

• Journal of the Korea Convergence Society
• /
• 제11권9호
• /
• pp.325-332
• /
• 2020

This study aimed to identify the difference of scapular movements between tennis players with and without shoulder impingement syndrome(SIS) and to verify the effect of kinesiology taping applied to scapular. A total of 15 players were categorized in SIS group(n=7) and control(CON) group(n=8). The scapular movements evaluated using 3-dimensional motion analysis in the 5 events of the flat first serve before and after the application of taping. The male of SIS group(-7.31±1.19° and -5.28±1.08°, respectively) had tilted scapular more anteriorly compared to CON group(-0.98±5.38° and -0.44±3.52°, respectively) at the maximally humeral external rotation and the impact(Z=-2.309, p=.021 and Z=-2.309, p=.021, respectively). The scapular(-8.11±2.57°) of female in SIS group tilted more anteriorly than that of CON(-0.97±3.31°) group at the maximally humeral external rotation(Z=-2.121, p=.034). But the scapular movements had no statistical differences between before and after the application of taping.

• Journal of agricultural medicine and community health
• /
• 제7권1호
• /
• pp.57-65
• /
• 1982

A special law on health care for rural areas was enacted, as of Dec. 31, 1980, in order to provide effective health care service in rural areas through the primary health care approach. The implementation of the PHC developed the CHP(Community Health Practitioner) and provided the training program lasted 24 weeks. The qualification of CHP is a registered nurses or midwivies. This study was conducted in order to analyze the characteristics of trainees of CHP and training environments. The data was collected from personal questionnaire by means of mailing. Respondent was 338 out of 356 trainees. The summary of the findings are as follows : 1) The 38.0% out of trainees is 25-29 years of age (minimum : 20, maximum 55, mean : 30.3). 2) The 59.0% of respondent come from county area and the 52.5% are married. 3) The 61.0% didn't receive any in-service education. 4) In their experience related to health care service, the 29.8% of them experienced during 4 year 6 year and the 50.8% of the holders in experience was engaged in clinical field. 5) As to motivation of application of CHP, the 55.1% respond to "Independently workable" and the 35.1% respond to "Worthwhile". 6) The 45.1% got any information sources on CHP from Newsletter of KNA. 7) The 46.8% of respondent showed that instructor had utilized both teaching materials and reference book. 8) During the training, the 49.4% stayed at own house but the 35.0% stayed with lodgings and flat. 9) The 52.8% of trainees comment on very short of living allowance. 10) The 19.3% of respondent is willing to serve as CHP for ten years or more, but the 42.1% respond to serve for obligation namely 2 years. This study result could be utilized as a basic data for improving the CHP training program and management of the CHP's field activity in the future.

• Laser Solutions
• /
• 제12권3호
• /
• pp.14-17
• /
• 2009

The laser welding was performed for the flange joint of two overlapped coaxial circular pipes which serve as the inlet and connector pipes of STS 316L. The laser welding test finally resulted in a good penetration depth of 1.8 to 2.0 mm. On the way to get the good welding quality, two important parameters were found to be optimized. One is the focal positioning which is the offset of the laser beam focus to the exact welding seam line, which is more critical in the inner flange laser welding. When the beam spot size was deviated more than $200\;{\mu}m$ from the seam line, welding of two pipes is failed. The other is a gap size since a certain amount of gap is inevitable due to fabrication tolerance, or artificial allowances for smooth insertion of a pipe. However, it is required to restrict the gap allowance within 0.2mm to avoid undesirable undercut on a welding bead.

• Korean Institute of Interior Design Journal
• /
• 제22권3호
• /
• pp.127-134
• /
• 2013

Baroque is fundamentally in contrast with renaissance style classicism, which attempted to fix a world view itself as the value of perpetuity. Furthermore, it is interpreted as a topic of incompletion or transformation that is not defined or is not exemplary and which may be enjoyed by people in the classical life, which requires a microscopic concept in contrast with dualism, the central axis of western civilization, namely, rational lucidity. Also, such characteristics are estimated to serve as a lubricant in life while going beyond the formal aesthetic level of art even from a contemporary perspective, and to play a productive role and to have potential. Consequently, this paper assumed that the concepts expressed by the 20th century US contemporary architect Richard Meier of a complex space, namely architectural formative vocabularies such as overlapping, interpenetration, collision, and collage style mixture created by a layered structure, in his architecture are in common with the double surface technique and juxtaposition of a flat structure of Baroque architecture. Then, the paper analyzed and considered the characteristics. The paper considered the following two issues: Such Baroque style formal principle is reinterpreted against a backdrop in which his architectural flow based on the domino theory of Le Corbusier became established as his own unique architectural feature, and it may be proposed as one big flow that enables us to seek again modernistic architecture that attempts to make an architectural space absolute as an atypical formal contour.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.229-236
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection. which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the buckling problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The accuracy of the present element is demonstrated in the prediction of buckling loads and buckling modes of shells with multiple delaminations. The present shell element should serve as a powerful tool in the prediction of buckling loads and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.69-72
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection, which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the eigenvalue problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The present shell element should serve as a powerful tool in the prediction of natural frequency and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.