• Science of Emotion and Sensibility
• /
• v.21 no.4
• /
• pp.63-76
• /
• 2018

The purpose of this study was to investigate the effect of contact type textile electrode structure on heart activity signal acquisition for smart healthcare. In this study, we devised six contact type textile electrodes whose electrode size and configuration were manipulated for measuring heart activity signals using computerized embroidery. We detected heart activity signals using a modified lead II and by attaching each textile electrode to the chest band in four healthy male subjects in a standing static posture. We measured the signals four times repeatedly for all types of electrodes. The heart activity signals were sampled at 1 kHz using a BIOPAC ECG100, and the detected original signals were filtered through a band-pass filter. To compare the performance of heart activity signal acquisition among the different structures of the textile electrodes, we conducted a qualitative analysis using signal waveform and size as parameters. In addition, we performed a quantitative analysis by calculating signal power ratio (SPR) of the heart activity signals obtained through each electrode. We analyzed differences in the performance of heart activity signal acquisition of the six electrodes by performing difference and post-hoc tests using nonparametric statistic methods on the calculated SPR. The results showed a significant difference both in terms of qualitative and quantitative aspects of heart activity signals among the tested contact type textile electrodes. Regarding the configurations of the contact type textile electrodes, the three-dimensionally inflated electrode (3DIE) was found to obtain better quality signals than the flat electrode. However, regarding the electrode size, no significant difference was found in performance of heart signal acquisition for the three electrode sizes. These results suggest that the configuration method (flat/3DIE), which is one of the two requirements of a contact type textile electrode structure for heart activity signal acquisition, has a critical effect on the performance of heart activity signal acquisition for wearable healthcare. Based on the results of this study, we plan to develop a smart clothing technology that can monitor high-quality heart activity without time and space constraints by implementing a clothing platform integrated with the textile electrode and developing a performance improvement plan.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.389-406
• /
• 2023

The research area, located in the northern coastal region of South Korea's West Sea, involves three bird habitats. Among these are two newly established habitats in Songdo International Business District, created by filling and developing tidal flats that were previously utilized as stopover sites for migratory birds. One of these areas showed decrease (Residual tidal flats, site.1) while the other showed increase (Artificial lake, site.2) in bird influx. The third habitat (Namdong reservoir, site.3) is a pre-existing stable habitat which has been maintained as a stable habitat. This study conducts an assessment of habitats based on avian population clusters and environmental surveys and proposes habitat management measures. A survey of bird populations and habitat environments was conducted for a total of 39 occasions from January to December 2022. The observed bird species totaled 14 families and 48 species with 20,760 individuals. Compared to the existing habitats, the newly established habitats showed relatively lower influx of bird species and individuals. During the habitat assessment, the newly established habitats were rated as I to II grade, while the existing habitat was rated as relatively high III grade on the grading assessment of the tidal flat. An analysis of habitat types revealed that the existing habitat, in which diverse strategies for habitat type diversity and mitigating anthropogenic interference were demonstrated, attracted a diverse range of bird species. Through this research, it was deduced that the diversity of habitat types plays a significant role in attracting various bird species. Upon evaluation of habitat types concerning the habitat characteristics of the bird species selected for habitat management, as habitat management measures, it is deemed that the creation of shielded green areas (referred to as 'buffer green') to minimize interference from the surroundings, the establishment of reed fields (site.1, 2) positively correlated with reservoirs, and the improvement of sandbanks (site.1) positively associated with tidal flats, the two relations which we drew from correlation analysis between occurrence species and habitat types, would contribute to the future restoration and maintenance of stable habitats. The results of this study can be applied not only to the study area but also to other development zones, such as coastal reclamation sites, which share similar geographical and environmental characteristics, including arrival sites for migratory birds.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.211-217
• /
• 2010

This study was conducted to investigate a proper method of ball mark repair by comparing the creeping bentgrass recovery speed on golf course green treated by various methods of ball mark repair. Nine general repairing methods were tested and compared; control (no repair, A type), two common methods of USGA (B type) and GCSAA (C type), three methods with fork shaped hand set performing at Korean golf courses (Ansung Benest, D; Sky72, E; Lakeside, F type), and three methods using the repair machine with 6, 8, or 14 teeth (G, H, I type, respectively). Three creeping bentgrass cultivar of 'Penncross', 'T-1', and 'CY-2' were tested in this field experiment. This test was carried out from September to November in 2009 at the nursery on the Seoul Lakeside Golf course. The average speed of turfgrass recovery after various ball mark repairing methods have been ranked as in the order of E, D, C, B, F, I, H, G, and A. The methods of hand practise showed more effective results than repair method using machines. The ball mark recovery speeds of 'Penncross' were in the order of E, D, B, C, F, I, H, and A. In the case of 'T1' and 'CY-2', similar orders were showed as D, E, B, F, C, H, I, A, G and the order of D, E, C, F, B, H, G, I, A, respectively. The ball mark recovery speed among creeping bentgrass cultivar resulted in the order of 'CY-2', 'Penncross', and 'T-1'. The most proper method of ball mark repair was repair method using a hand set tool especially the method of the Sky72 Golf course (E type). At the first, remove a damaged grass area with fork and tap. And then gather the side grasses into the center area with pulling the grasses with fork. After that, make harden and flat on the turf surface by pounding and rolling with the round wooden stick. The final Nstep, water the repaired grass surface. This ball mark repairing practise showed a most rapid and proper recovery method on creeping bentgrass green.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.28-37
• /
• 2011

In this study, the series-poem, Bihaedangsasippalyoung(48 poems for beautiful scene of Bihaedang), written by scholars of Jiphyonjeon for Bihaedang garden of Anpyung-Daegun(Prince Anpyung, 1416-1453), was analyzed focusing on scenery lexeme to interpret the meaning of scenery and gardening culture of Sadaebu(noblemen) during the first term of Chosun Dynasty. The study result is as followings. First, the subtitle of Sasippalyoung(48 poems) written by Anpyung-Daegun while he grew Bihaedang garden on the foot of Inwang Mountain showed repetitive nomativity comparing joining of yin and yang, such as life and form of animal and plan, time and space, meaning and symbolism, etc. Among scenery lexemes, 38 are represented plant and flowers, and 8 are represented gardening ornaments and animals. Second, the names of gardens were expressed as Wonrim, Jongje, Imchon(Trees and Ponds), or Hwawon(Flower garden), or also presented as Gongjeong(Empty garden), Manwon(Full garden), Jungjeong(Middle garden), Huwon(Backyard), Wonrak(Inner court), or Byulwon(Seperated garden) depending on density and location. In addition, there were pavilions and ponds, stepping stones and stairs, a pergola, a flat bench, flowerpots, an artificial hill, oddly shaped stones, wells, aviary, flower beds, or hedges. A gardener was called Sahwa(flower keeper), planting and gardening of garden trees were called Jaebae(cultivation), a pond island was called Boogoo(floating hill), and miniature landscapes were called Chukjee(reduced land). Third, willows were planted on the outdoor yard, and plum trees were planted in front of the library, which led to bamboo woods road. Peony, camellia, tree peony and crepe myrtle were planted on the inner court with mossy rocks, small artificial hills, glass rocks, flower pots. There were rectangular ponds, while breeding deer, dove, rooster, and cranes. Fourth, landscape elements were enjoyed as metaphysical symbolic landscape by anthropomorphism, such as (1) gentlemen and loyalty, (2) wealth and prosperity, (3) Taoist hermit and poetical life, (4) reclusion and seclusion, (5) filial piety, virtue, introspection, etc. In other words, the garden presented a variety of gardening culture appreciating meaningful landscape, such as investigation of things, reclusion and seclusion, and building orientation of a fairyland yearning eternal youth and Mureungdowon(Taoist Arcadia) by making a garden blending beautiful flowers and trees, with precious birds and animals. Fifth, there were many landscape appreciation schemes, such as Angkyung(looking-up), Bukyung(looking-down), Jeokyung(looking-under), Chakyung(bringing outer space into inside), Yookyung(flower viewing), Yojeong(walking around the garden enjoying flowers), Hwasaekhyangbyuk(flower gardening), and Garden appreciation enjoying landscape through time and seasons with different inspirations.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.45-53
• /
• 2008

The purpose of this study was to determine the effects on the elastic moduli of the adhesive and the hybrid layer from thermocycling. Twenty one human molars were used to create flat dentin surfaces. Each specimen was bonded with a light-cured composite using one of three commercial adhesives (OptiBond FL [OP], Clearfil SE Bond [CL], and Xeno III [XE]). These were sectioned into two halves and subsequently cut to yield 2-mm thickness specimens; one specimen for immediate bonding test without thermocycling and the other subjected to 10,000 times of thermocycling. Nanoindentation test was performed to measure the modulus of elasticity of the adhesive and the hybrid layer, respectively, using an atomic force microscope. After thermocycling, XE showed a significant decrease of the modulus in the adhesive layer (p < 0.05). Adhesives containing hydrophilic monomers are prone to hydrolytic degradation. It may result in the reduced modulus of elasticity, which leads to the mechanically weakened bonding interface.

• Journal of Trauma and Injury
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2016

Purpose: Tracheobronchial injuries caused by trauma are rare, but can be life threatening. The objective of this study was to evaluate the surgical outcome for patients with tracheobronchial injuries and to determine the difference, if any, between the outcomes for patients with penetrating trauma and those for patients with blunt trauma. Methods: From January 2010 to June 2015, 40 patients underwent tracheobronchial repair surgery due to trauma. We excluded 14 patients with iatrogenic injuries, and divided the remaining 26 into two groups. Results: In the blunt trauma group, injury mechanisms were motor vehicle accident (9 cases), free falls (3 cases), flat falls (1 case) and mechanical injury (1 case). In the penetrating trauma group, injury mechanisms were stab wounds (10 cases), a gunshot wound (1 case) and a stab wound caused by metal pieces (1 case). The mean RTS (Revised Trauma Score) was $6.89{\pm}1.59$ (range: 2.40-7.84) and the mean ISS (Injury Severity Score) was $24.36{\pm}7.16$ (range: 11-34) in the blunt group; the mean RTS was $7.56{\pm}0.41$ (range: 7.11-7.84), and the mean ISS was $13{\pm}5.26$ (range: 9-25) in the penetrating trauma group. In the blunt trauma group, 9 primary repairs, 1 resection with end-end anastomosis, 2 lobectomies, 1 sleeve bronchial resection and 1 pneumonectomy were performed. In the penetrating trauma group, 10 primary repairs and 2 resections with end-end anastomosis were performed. Complications associated with surgery were found in one patient in the blunt trauma group, and one patient in the penetrating trauma group. No mortalities occurred in either groups. Conclusion: Surgical management of a traumatic tracheobronchial injury is a safe procedure for both patients with a penetrating trauma and those with a blunt trauma.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.4
• /
• pp.1-14
• /
• 2008

Although the Dreamland site was the only flat amusement park in the northern part of Seoul, the site lost its function as a regional park due to aging and, therefore, was no longer in use. The site is surrounded by currently existing high dense low-story housing blocks and proposed new towns. A renovation plan for Dreamland was raised by the City of Seoul to enhance the quality of the urban environment in the northern part of Seoul. This study articulates the design concepts and strategies of the prizewinning work of the International Design Competition for Gangbuk Large Park. The three key points can be summarized as follows: First, this design proposal tried to find a new possibility for a large mountain park in an urban areas. These days, mountain parks are used limitedly as ordinary living spaces for activities such as a walking, hiking, and physical training. New strategies were sought to reconstruct the sentiment with which our ancestors enjoyed the mountains. Second, this proposal tried to make Dreamland a socially self-sufficient park. We designed a park which generates self-energy and which communicates with the city, not a park which only exists as a green island in a city. Lastly, rain fed paddy fields, a typical Korean vernacular landscape, was a tangible space which represented people's life-styles harmonizing with the nature. Rain fed paddy fields is a design motif which puts the three surrounding mountains together with the site. It is expected that the new design will works as a noted place.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.1
• /
• pp.7-14
• /
• 1974

1. Stylochus ijimai spawns from May to October with peak spawning from July to September, P. obscurus spawns from June to October with peak spawning from July to September. 2. S. ijimai spawns approximately 96,000-132,000 eggs by one spawning. 1. Just after spawnings, the eggs of S. ijimai were $102\mu$ in diameter, and those of P. obscurus were $108\mu$. 4. S. ijimai and P. obscurus have simple eggs. S. ijimai develop indirectly having Gotte larvae, while P. obscurus develop directly. 5. These two species show very similar patterns of early developments from maturation division of eggs to the gastrula stage. 6. The zygots of S. ijimai reaches mesentoblast stage 48 hours after fertilization, and Gotte larvae hatch out 7 days after fertilization. The zygots of P. obscurus reaches mesentoblast stage 72 hours after fertilization, and juveniles hatch out 14 days after fertilization. 7. S. ijimai, have 14 days of planktonic larvae stages bearing strong phototacic behavior : P. obscurus have 7 days of planktonic life without phototacic behavior. 8. Newly hatched larvae of S. ijimai and P. obscurus are $138\mu\;and\;170\mu$ in length respectively. The early creeping forms of S. ijimai and P. obscurus are $152\mu\;and\;185\mu$ in length respectively. 9. In the early creeping stage S. ijimai are characterized by testing processes and flattening of the body. In the same stage P. obscurus lost 2 eye-spots in the cerebral area. 10. The early creeping larvae of these two species were found only in mud-flat substrates.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.108-115
• /
• 2016

Purpose: Radio frequency (RF) heating is a promising thawing method, but it frequently causes undesirable problems such as non-uniform heating. This can occur because of the food shape, component distribution, and initial temperature differences between food parts. In this study, RF heating was applied to the thawing of cylindrically shaped pork sirloin by changing the shape of electrodes and the surrounding temperature. Methods: Curved electrodes were utilized to increase the thawing uniformity of cylindrically shaped frozen meat. Pork sirloin in the shape of a half-circle column was frozen in a deep freezer at $-70^{\circ}C$ and then thawed by RF heating with flat and curved electrodes. In order to prevent fast defrosting of the food surface by heat transfer from air to the food, the temperature of the thawing chamber was varied by -5, -10, and $-20^{\circ}C$. The temperature values of the frozen pork sirloin during RF thawing were measured using fiber-optic thermo sensors. Results: After multiple applications of curved electrodes resembling the food shape, and a cooled chamber at $-20^{\circ}C$ the half-cylindrically shaped meat was thawed without surface burning, and the temperature values of each point were similarly increased. However, with the parallel electrode, the frozen meat was partially burned by RF heating and the temperature values of center were overheated. The uniform heating rate and heat transfer prevention from air to the food were crucial factors for RF thawing. In this study, these crucial factors were accomplished by using a curved electrode and lowering the chamber temperature. Conclusions: The curved shape of the electrode and the equipotential surface calculated from the modeling of the parallel capacitor showed the effect of uniform heating of cylindrically shaped frozen food. Moreover, the low chamber temperature was effective on the prevention of the surface burning during RF thawing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.4
• /
• pp.45-71
• /
• 1991

The landscape systems in Korean island settlements can be recognized as results of ingabitants' ecological adptation to the isolated environment with the limited natural resources. Both the fishery dominant industry in island society and ecological nature of its environments seem to have influenced on inhabitants' environmental cognition as well as the physical landscape of island villages such as its location, spatial pattern in each village, housing form and so on. This study was done mainly by both refering to the related documents and direct observations in case study areas, and results of the study can be summarized as follows. 1. In general, the landscape of an individual island seems to take more innate characteristics of island's own, corresponding to the degree of isolation from mainland. That is, while the landscape of island in neighboring waters takes both inland-like and island-innate landscape character at the same time, the one in the open sea far from land takes more innate landscape character of all island's own in the aspects of village location, land use and housing density etc. 2. The convex landform of most islands brings about more centrifugal village allocation than centripetal allocation in most inland villages. And thus most villages in each island face extremely diverse directions different from the south facing preference in most inland rural villages. 3. Most island villages tend to be located along the ecologically transitional strip between land and sea, so called 'line of life', rather than between hilly slope and flat land as being in most inland village locations. So they are located with marine ecology bounded fishing ground ahead and land ecology bounded agricultural site at the back of them. 4. The settlement pattern of the island fishing villages shows more compact spatial structure than that of inland agricultural villages, due to the absolute limits of usable land resources and the adaptation to the marine environment with severe sea winds and waves or for the easy accessability to the fishing grounds. And also the managerial patterns of public owned sea weed catching ground, which take each family as the unit of usership rather than an individual, seem to make the villagescape more compact and the size of Individual residence smaller than that of inland agricultural village. 5. The folk shrine('Dand') systems, in persrective of villagescape, represent innate environmental cognition of island inhabitants above all other cultural landscape elements in the island. Usually the kinds and the meanings of island's communal shrine and its allocative patternsin island villagescape are composed of set with binary opposition, for example 'Upper shrine(representing 'earth', 'mountain' or 'fire')' and 'Lower Shrine(representing 'sea', 'dragon' or 'water') are those. They are usually located at contrary positions in villagescape each other. That is, they are located at 'the virtical center or visual terminus(Upper shrine at hillside behind the village)' and 'the border or entrance(Lower Shrine at seashore in front of the village)'. Each of these shirines' divinity coincides with each subsystem of island's natural eco-system(earth sphere vs marine sphere) and they also contribute to ecological conservation, bonded with the 'Sacred Forest(usually with another function of windbreak)' or 'Sacred Natural Fountain' nearby them, which are representatives of island's natural resources.