• Journal of KIISE:Databases
• /
• v.34 no.2
• /
• pp.109-118
• /
• 2007

Recently, flash memory is used to store data in mobile computing devices such as PDAs, SmartCards, mobile phones and MP3 players. These devices need index structures like the B-tree to efficiently support some operations like insertion, deletion and search. The BFTL(B-tree Flash Translation Layer) technique was first introduced which is for implementing the B-tree on flash memory. Flash memory has characteristics that a write operation is more costly than a read operation and an overwrite operation is impossible. Therefore, the BFTL method focuses on minimizing the number of write operations resulting from building the B-tree. However, we indicate in this paper that there are many rooms of improving the performance of the I/O cost in building the B-tree using this method and it is not practical since it increases highly the usage of the SRAM memory storage. In this paper, we propose a BOF(the B-tree On Flash memory) approach for implementing the B-tree on flash memory efficiently. The core of this approach is to store index units belonging to the same B-tree node to the same sector on flash memory in case of the replacement of the buffer used to build the B-tree. In this paper, we show that our BOF technique outperforms the BFTL or other techniques.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.127-135
• /
• 2013

In order to acquire images in low-light environments, it is usually necessary to adopt long exposure times or resort to flash lights. However, flashes often induce color distortion, cause the red-eye effect and can be disturbing to subjects. On the other hand, long-exposure shots are susceptible to subject-motion, as well as motion-blur due to camera shake when performed hand-held. A recently introduced technique to overcome the limitations of traditional low-light photography is that of multi-spectral flash. Multi-spectral flash images are a combination of UV/IR and visible spectrum information. The general idea is that of retrieving details from the UV/IR spectrum and color from the visible spectrum. However, multi-spectral flash images themselves are subject to color distortion and noise. This works presents a method to compute multi-spectral flash images so that noise can be reduced and color accuracy improved. The proposed approach is a previously seen optimization method, improved by the introduction of a weight map used to discriminate uniform regions from detail regions. The weight map is generated by applying canny edge operator and it is applied to the optimization process for discriminating the weights in uniform region and edge. Accordingly, the weight of color information is increased in the uniform region and the detail region of weight is decreased in detail region. Therefore, the proposed method can be enhancing color reproduction and removing artifacts. The performance of the proposed method has been objectively evaluated using long-exposure shots as reference.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.10-24
• /
• 2021

Purpose: The purpose of this study is to determine the dangers of biodiesel and general diesel mixtures currently used as alternative fuels by equipment (tag method and penski Marten method) and to determine the difference between flash point and combustion point (closed, open) according to test methods. It is intended to be used as a reference material for identification and evaluation of firecausing substances by confirming the risk of mixtures by comparative analysis and measurement, and establishing a risk assessment method for chemical substances. Method: Flash point test method and result treatment were tested based on ASTM and KS M mode, which are tag sealing and pen schematense test methods used as flash point and combustion point test methods for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was a test equipment that satisfies the test standards of KS M 2010 with equipment produced by TANAKA of Japan. The flash point and combustion point were measured, and the flash point according to the test method of biodiesel and general diesel mixture ( Closed, open), and the ignition point of a mixture of biodiesel and general diesel was compared and analyzed for ignition risk compared with conventional diesel. Results: Looking at the experimental results, first, as an analysis of the risk of flammability of the mixture, the flash point of a substance containing 70% biodiesel was found to be about 92℃ based on general diesel with a flash point of 64.5℃, and gasoline and biodiesel or When the biodiesel mixture was synthesized, it was confirmed that the flash point tends to decrease. In addition, the difference between the flash point and the combustion point was analyzed as about 20 ~ 30℃, and when a small amount of gasoline or methanol was mixed, the flash point was lowered, but it was confirmed that the combustion point was similar to that of the existing mixture. Conclusion: In this study, in order to secure the effectiveness of the details of the criteria for judging dangerous materials in the existing Dangerous Materials Safety Management Act, and to secure the reliability and reproducibility of the judgment of dangerous materials, we confirm the criteria for judging the risk of the mixture through an experimental study on flammable mixtures. It will be able to provide reference data for experimental criteria for flammable liquids that are regulated in the field. In addition, if this study accumulates know-how on experiment by test method, it is expected that it can be used as a basis for research on risk assessment and research on dangerous goods.

• Journal of the Korean Institute of Gas
• /
• v.14 no.5
• /
• pp.19-25
• /
• 2010

The flash points for the systems, o-xylene+n-pentanol and m-xylene+n-hexanol, were measured by using Tag open-cup tester(ASTM D1310-86). The experimental data were compared with the values calculated by the Raoult's law and the optimization method using van Laar and Wilson equations. The calculated values based on the optimization method were found to be better than those based on the Raoult's law. The predictive curve of the flash point prediction model based on the van Laar equation described the experimentally-derived data more effectively than was the case when the prediction model was based upon the Wilson equation.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.495-498
• /
• 1998

Mobile computers have restrictions for size, weight, and power consumption that are different from traditional workstations. Storage device must be smaller, lighter. Low power consumed storage devices are needed. At the present time, flash memory device is a reasonable candidate for such device. But flash memory has drawbacks such as bulk erase operation and slow program time. This causes of worse average write performances. This paper suggests a storage method which improves write performance.

• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.383-394
• /
• 2010

Flash memory based SSDs are currently being considered as a promising candidate for replacing hard disks due to several superior features such as shorter access time, lower power consumption and better shock resistance. However, SSDs have different characteristics from hard disk such as difference of unit and time for read, write and erase operation and impossibility for over-writing. Because of these reasons, SSDs have disadvantages on hard disk based systems, so FTL(Flash Translation Layer) is designed to increase SSDs' efficiency. In this paper, we propose an advanced logical address mapping method for increasing SSDs' performance, which is named HAMM(Hybrid Address Mapping Method). HAMM addresses drawbacks of previous block-mapping method and super-block-mapping method and takes advantages of them. We experimented our method on our own SSDs simulator. In the experiments, we confirmed that HAMM uses storage area more efficiently than super-block-mapping method, given the same buffer size. In addition, HAMM used smaller memory than block-mapping method to construct mapping table, demonstrating almost same performance.

• Journal of Korea Water Resources Association
• /
• v.49 no.1
• /
• pp.19-28
• /
• 2016

The objective of this study is the generation of the gridded flash flood index using the gridded hydrologic components of TOPLATS land surface model and statistic flash flood index model. The accuracy of this method is also examined in this study. The study area is the national capital region of Korea, and 38 flash flood damages had occurred from 2009 to 2012. The spatio-temporal resolutions of land surface model are 1 h and 1 km, respectively. The gridded meteorological data are generated using the inverse distance weight method with automatic weather stations (AWSs) of Korea Meteorological Administration (KMA). The hydrological components (e.g., surface runoff, soil water contents, and water table depth) of cells corresponding to the positions of 38 flood damages reasonably respond to the cell based hourly rainfalls. Under the total rainfall condition, the gridded flash flood index shows 71% to 87% from 4 h to 6 h in the lead time based on the rescue request time and 42% to 52% of accuracy at 0 h which means that the time period of the lead time is in a limited rescue request time. From these results, it is known that the gridded flash flood index using the cell based hydrological components from land surface model and the statistic flash flood index model have a capability to predict flash flood in the mountainous area.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.1-9
• /
• 2017

Recently, flash memory has been in a great demand from embedded system sectors for storage devices. However, program/erase (P/E) cycles per block are limited on flash memory. For the limited number of P/E cycles, many wear leveling techniques are studied. They prolonged the life time of flash memory using information tables. As one of the techniques, block erase table (BET) method using a bit array table was studied for embedded devices. However, it has a disadvantage in that performance of wear leveling is sharply low, when the consumption of memory is reduced. To solve this problem, we propose a novel wear leveling technique using Sampling-based Block Erase Table (SBET). SBET relates one bit of the bit array table to each block by using exclusive OR operation with round robin function. Accordingly, SBET enhances accuracy of cold block information and can prevent to decrease the performance of wear leveling. In our experiment, SBET prolongs life time of flash memory by up to 88%, compared with previous techniques which use a bit array table.

• Journal of the Korean Institute of Gas
• /
• v.11 no.3
• /
• pp.13-18
• /
• 2007

The multivariate statistical analysis, using the multiple linear regression(MLR), have been applied to analyze and predict the flash points of binary systems. Prediction for the flash points of flammable substances is important for the examination of the fire and explosion hazards in the chemical process design. In this paper, the flash points are predicted by MLR based on the physical properties of pure substances and the experimental flash points data. The results of regression and prediction by MLR are compared with the values calculated by Raoult's law and Van Laar equation.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1710-1717
• /
• 2009

Flash memory has become the most important storage media in mobile devices along with its attractive features such as low power consumption, small size, light weight, and shock resistance. However, a flash memory can not be written before erased because of its erase-before-write characteristic, which lead to some garbage collection when there is not enough space to use. In this paper, we propose a novel garbage collection scheme, called block-level buffer garbage collection. When it is need to do merge operation during garbage collection, the proposed scheme does not merge the data block and corresponding log block but also search the block-level buffer to find the corresponding block which will be written to flash memory in the next future, and then decide whether merge it in advance or not. Our experimental results show that the proposed technique improves the flash performance up to 4.6% by reducing the unnecessary block erase numbers and page copy numbers.