• Transactions of the Society of Information Storage Systems
• /
• v.7 no.1
• /
• pp.7-12
• /
• 2011

The flash memory has been remarked as the next generation media of portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major data storage components for desktop and servers. The purpose of our study is to upgrade a traditional mirroring scheme based on SSD storages due to the relatively slow or freezing characteristics of write operations, as compared to fast read operations. For this work, we propose a new storage management scheme called Memory Mirror-Switching based on traditional mirroring scheme. Our Mirror-Switching scheme improves flash operation performance by switching write-workloads from flash memory to RAM and delaying write operations to avoid freezing. Our test results show that our scheme significantly reduces the write operation delay and storage freezing.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.74-82
• /
• 2011

SSD has a limitation of number of erase/write cycles and does not allow in-place update unlike the hard disk because SSD is composed of an array of NAND flash memory. Thus, FTL is used to effectively manage SSD of having different characteristics from traditional disk. FTL has page, block, log-block mapping method. Among then, when log-block mapping method such as BAST and FAST is used, the performance of SSD is degraded because frequent merge operations cause lots of pages to be copied and deleted. This paper proposes a data allocation and replacement method based on access frequency by allocating PRAM as checking area of access frequency, log blocks, storing region of hot data in SSD. The proposed method can enhance the performance and lifetime of SSD by storing cold data to flash memory and storing log blocks and frequently accessed data to PRAM and then reducing merge and erase operations. Besides, a data replacement method is used to increase utilization of PRAM which has limitation of capacity. The experimental results show that the ratio of erase operations of the proposed method is 46%, 38% smaller than those of BAST and FAST and the write performance of the proposed method is 34%, 19% higher than those of BAST and FAST, and the read performance of the proposed method is 5%, 3% higher than those of BAST and FAST, respectively.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.763-766
• /
• 2014

플래시 메모리는 입출력 속도가 빠르고 에너지 효율성이 좋지만, out-place update만 가능하며 쓰기 연산을 위한 IO의 지연시간이 읽기 연산보다 현저히 길다는 단점을 가진다. 이를 보완하기 위해 고안된 FlashSSD(Solid State Drive)는 최근 하드 디스크를 대체하는 저장장치로 주목받고 있다. DBMS(Database Management System)의 성능 개선을 위하여 FlashSSD를 활용한 다양한 연구가 진행되었다. 그중 FD-tree를 사용한 인덱스는 좋은 갱신 성능을 보임과 동시에 검색 성능을 보인다. 하지만 FD-tree의 구성 요소 중 하나인 레벨이 하나의 자료구조로만 이루어져 있어 인덱스로서의 비효율성을 가지고 있기 때문에 이를 인덱스의 접근 빈도를 이용하여 개선하고 검색 성능을 높이고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1591-1594
• /
• 2010

NAND 플래시 메모리 기반의 Solid State Disk (SSD)의 내부에는 Flash Translation Layer (FTL)이라는 소프트웨어가 사용되고 있다. FTL은 파일 시스템으로부터 요청되는 논리 주소를 플래시 메모리의 물리 주소로 변환하며 이를 위하여 사상 테이블을 사용한다. 사상 테이블의 빠른 접근을 위하여 사상 테이블은 SSD 내부의 RAM에 유지하는데 SSD의 용량이 커지게 되면 사상 테이블로 인해 요구되는 RAM의 크기도 커지는 문제점이 있다. 본 논문에서는 FTL의 사상 테이블을 페이지 단위로 나누어 필요할 때마다 RAM에 적재하는 다단계 사상 테이블 기법을 연구하였다.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.81-86
• /
• 2023

SSD (solid state disk), which is flash memory-based storage device, has the advantages of high density and fast data processing. Therefore, it is being utilized as a storage device for high-capacity data storage systems that manage rapidly increasing big data. However, flash memory, a storage media, has a physical limitation that when the write/erase operation is repeated more than a certain number of times, the cells are worn out and can no longer be used. In this paper, we propose a method for converting defective multi-bit cells into single-bit cells to reduce the defect rate of flash memory and extend its lifetime. The proposed idea distinguishes the defects and treatment methods of multi-bit cells and single-bit cells, which have different physical characteristics but are treated as the same defect, and converts the expected defective multi-bit cells into single-bit cells to improve the defect rate and extend the overall lifetime. Finally, we demonstrate the effectiveness of our proposed idea by measuring the increased lifetime of SSD through simulations.

• Journal of Digital Contents Society
• /
• v.12 no.2
• /
• pp.141-150
• /
• 2011

Recently the Solid State Drive (SSD) is widely used for storage system of various mobile devices. In this case, existing buffer replacement algorithms based on the hard disk do not consider characteristics of flash memory, so it caused performance degradation of the system. This paper proposes a novel buffer replacement policy called ABM (Asymmetric Buffer Management) policy. ABM policy separates read and write buffer space and applies different replacement unit and replacement algorithm for each buffer. In addition, write buffer delay scheme and dynamic size adaptation algorithm is applied for better performance. ABM outperforms other replacement policies, especially ABM-LRU-CLC shows 32% better performance than normal LRU policy.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.593-598
• /
• 2022

Recently, data production has seen explosive growth, and the storage systems to store these big data safely and quickly is evolving in various ways. A typical configuration of storage systems is the use of SSDs with fast data processing speed as a RAID group that can maintain reliable data. However, since NAND flash memory, which composes SSD, has the feature that deterioration if writes more than a certain number of times are repeated, can increase the likelihood of simultaneous failure on multiple SSDs in a RAID group. And this can result in serious reliability problems that data cannot be recovered. Thus, in order to solve this problem, we propose a method of throttling IOs so that each SSD within a RAID group leads to a different life-end. The technique proposed in this paper utilizes SMART to control the state of each SSD and the number of IOs allocated according to the data pattern used step by step. In addition, this method has the advantage of preventing large amounts of concurrency defects in RAID because it induces differential lifetime finishes of SSDs.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.3
• /
• pp.17-21
• /
• 2008

Application of flash memory in mobile and ubiquitous related devices is rapidly being increased due to its low price and high performance. In addition, some notebook computers currently come out into market with a SSD(Solid State Disk) instead of hard-drive based storage system. Regarding this trend, applications need to increase the storage capacity using multiple flash memory chips for larger capacity sooner or later. Flash memory based storage subsystem should resolve the performance bottleneck for writing in perspective of speed and lifetime according to its physical property. In order to make flash memory storage work with tangible performance, reclaiming of invalid regions needs to be controlled in a particular manner to decrease the number of erasures and to distribute the erasures uniformly over the whole memory space as much as possible. In this paper, we study the performance of flash memory recycling algorithms and demonstrate that the proposed algorithm shows acceptable performance for flash memory storage with multiple chips. The proposed cleaning method partitions the memory space into candidate memory regions, to be reclaimed as free, by utilizing threshold values. The proposed algorithm handles the storage system in multi-layered style. The impact of the proposed policies is evaluated through a number of experiments.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.35-40
• /
• 2010

NAND flash memory has been widely used than traditional HDD in PDA and other mobile devices, embedded systems, PC because of faster access speed, low power consumption, vibration resistance and other benefits. DiskSim and other HDD simulators has been developed that for find improvements for the software or hardware. But there is a few Linux-based simulators for NAND flash memory and SSD. There is necessary for Windows-based NAND flash simulator because storage devices and PC using Windows. This paper describe for development of simulator-NFSim for FTL performance analysis in NAND flash. NFSim is used to measure performance of various FTL algorithms and FTL wear-level. NAND flash memory model and FTL algorithm developed using Windows Driver Model and class for scalability. There is no need for another tools because NFSim using graph tool for data measure of FTL performance.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.2
• /
• pp.41-46
• /
• 2010

Recently, Flash Memory Drives are one of the best media to support portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major database storage components for desktop and server computers. However, we need to improve traditional storage management schemes based on HDD(Hard Disk Drive) and RAID(Redundant Array of Independent Disks) due to the relatively slow or freezing characteristics of write operations of SSDs, as compared to fast read operations. In order to achieve this goal, we propose a new storage management scheme called Hetero-Mirroring based on traditional HDD mirroring scheme. Hetero-Mirroring-based storage management improves RAID-1 operation performance by balancing write-workloads and delaying write operations to avoid SSD freezing.