• 한국화재소방학회논문지
• /
• 제24권6호
• /
• pp.170-175
• /
• 2010

동축류버너를 이용한 제트확산화염에서 이산화탄소의 첨가가 매연 생성에 미치는 영향을 조사하였다. R-타입 열전대를 이용하여 화염대 및 황염과 청염의 경계온도를 측정하였다. 광감쇄법을 이용하여 화염이 존재하는 국소부분에서의 상대적인 매연 농도(1-I/$I_0$)를 측정하였다. 광원으로는 파장이 632.8nm인 He-Ne 레이저가 사용되었고 디텍터를 이용하여 매연입자에 의해 산란과 흡수를 겪은 후의 감쇄된 신호를 직접 측정하였다. 또한, 매연 생성에 있어서의 열적 효과를 알아보기 위해 산화제의 유속을 변화시켜 유속에 의한 영항을 알아보았다. 실험 결과로써, 황염과 청염 각각의 온도는 이산화탄소의 첨가에 따라 점차 낮아졌지만 황염과 청염의 경계온도는 거의 일정하였다. 산화제 측에 이산화탄소를 첨가함에 따라 상대적인 매연 농도는 낮아졌고 이는 산화제의 유속을 증가시켰을 때의 효과와 유사했다. 이것은 화염온도의 저하와 매연입자의 체류시간 감소에 기인하는 것으로 생각된다. 또한 이산화탄소의 첨가가 화염의 불안정성을 야기하여 순수 에틸렌/공기 화염에 비해 화염의 길이가 다소 증가하는 것으로 나타났다.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.128-140
• /
• 1996

To analyze a formation process of the soots in spray flame in the combustion chamber, an optically accessible DI Diesel engine was used for visualization. The images of the flames and soots were visualiaed with high speed camera by Schlieren method and Light extinction method. The spray flame and soot images on the films were analyzed at the various engine operating conditions. Soot distributed widely in spray flame and its concentration was about $100g/m^3$ at the position close by nozzle tip of spray flame region, however it decreased below $20g/m^3$ at the corner of combustion chamber due to soot oxidation.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1796-1804
• /
• 1992

본 연구에서는 동심확산화염내에 생기는 매연 입자의 크기와 농도를 광산란 소멸법으로 보다 정확히 측정하여 궁극적 목적인 매연입자 제어의 기반을 조성하고자 한다.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.94-100
• /
• 2002

The effects of periodic fuel supply on the nonpremixed flame stability and soot formation were experimentally studied. A solenoid valve was used to control the period of fuel supply. The laser induced incandescence technique was used to visualize cool: volume fraction profile. The flame base shape was changed significantly by the fuel supply period and partially by the fuel flowrates. The portion of bluish flame near the flame base became larger as the period increased. When the period was long, two flames coexisted within one period. It seemed that the characteristic of flame stability were repeated with 4.68m change of fuel supply line length. The soot mass measurements and soot volume fraction measurements revealed that the maximum suppression of soot by the perioic fuel supply was approximately 75% , which occurred when the occurred when the fuel supply period was relatively long.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2626-2636
• /
• 1996

A study of soot deposition and reentrainment was carried out both theoretically and experimentally to understand behavior of soot formed by incomplete combustion in a diesel engine. Theoretically, soot deposition on engine cylinder wall and/or piston head was studied with a stagnation point flow approximation. Soot reentrainment occurred upon exhaust gas blowdown was also studied by assuming a long-normal shear velocity distribution. Experimentally, a LPG$O_2/N_2$ flame impinging on a disk, produced by a concentric tubular burner, was chosen as deposition configuration and a shear flow unit with compressed air was installed for the study of reentrainment. For selected flame configuration, soot deposition measurements were conducted and showed that the dominant deposition mechanism was thermophoresis. Distributions of gas temperature and soot number density were estimated by combining data obtained by a B-type thermocouple with a thermophoretic transport theory. Disk temperature distributions were directly measured using a K-type thermocouple. Soot size and morphology were estimated from a TEM photograph. Ratios of soot deposit to reentrained amount were measured for a wide range of shear flow velocities, which showed that the reentrainment model was reasonable.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1101-1109
• /
• 2004

Experimental measurements of flame structure and soot characteristics were performed fur ethene inverse diffusion flames (IDF). IDF has been considered as the excellent flow field to study the incipient soot because soot particle do not experience the oxidation process. In this study, LIF image clarified the reaction zone of IDF with OH signal and PAH distribution. laser light scattering technique also identified the being of soot particle. To address the degree of soot maturing, C/H ratio and morphology of soot sample were investigated. From these measurements, the effect of flow residence time and temperature on soot inception could be suggested, and more details on soot characteristic in the IDF was determined according to fuel dilution and flame condition. The fuel dilution results in a decrease of temperature and enhancement of residence time, but the critical dilution mole fraction is existed for temperature not to effect on soot growth. Also, the soot inception evolved on the specific temperature and its morphology are independent of the fuel dilution ratio of fuel.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.183-193
• /
• 2000

Soot formation and oxidation is closely related to the combustion phenomena inside a diesel engine. Laser-based diagnostics provide a means for improving our understanding of diesel combustion, because they have highly temporal and spatial ability. To understand the soot behavior we did preliminary study by taking flame luminosity photographs and 2-D images of soot distribution using Laser Elastic Scattering(LIS) and Laser-Induced Incandescence(LII). From the data we found that soot concentration was high in the bowl and disappeared from the central region in the late combustion stage and that soot exists in the flame using luminosity, LIS and LII.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.22-27
• /
• 2016

The use of electromagnetic wave has been interested in various energy industry because it enhances a flame stability and provides higher safety environments. However it might increase the pollutant emissions such as NOx and soot, and have harmful influence on human and environments. Therefore, it is very important to understand interaction mechanism between flame and electromagnetic wave from environmental point of view. In this study, an experiment was performed with jet diffusion flames induced by electromagnetic wave. Microwave was used as representative electromagnetic wave and a flickering flame was introduced to simulate the more similar combustion condition to industry. The results show that the induced microwave enhances the flame stability and blowout limit. The unstable lifted flickering flames under low fuel/oxidizer velocity is changed to stable attached flames or lift-off flames when microwave applied to the flames, which results from the abundance of radical pool. However, NOx emission was increased monotonically with increasing the microwave power as microwave power increased up to 1.0 kW. The effects might be attributed to the heating of combustion field and thermal NOx mechanism will be prevailed. Soot particle was examined at the post flame region by TEM grid. The morphology of soot particle sampled in the microwave induced flames was similar to the incipient soot that is not agglomerated and contain a lots of liquid phase hydrocarbon such as PAH, which soot particle formed near reaction zone is oxidized on the extended yellow flame region and hence only unburned young particles are emitted on the post flame region.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.973-981
• /
• 2006

Recently there is an increasing interest in particulate matter emission because of new emission regulations, health awareness and environmental problems. It requires to improve particulate measurement techniques as well as to reduce soot emissions from combustion systems. As mentioned above, it is demanded that reduction techniques together with measurement techniques of exhausted particulate matters in combustion systems such as vehicles. However, measurement techniques of particulate matters should be prior to reduction techniques of that because it is able to know an increase and a decrease of exhausted particulate matters when measured particulate matters. Therefore, in this study, we report the measurement of soot primary-particle size using time-resolved laser induced incandescence (TIRE-LII) technique in laminar ethylene diffusion flame. As an optical method, laser induced incandescence is one of well known methods to get information for spatial and temporal soot volume fraction and soot primary particle size. Furthermore, TIRE-LII is able to measure soot primary particle size that is decided to solve the decay ate of signal S $(t_1)$ and S $(t_2)$ at two detection time. In laminar ethylene diffusion flame, visual flame height is 40 mm from burner tip and measurement points are height of 15, 20, 27.5, 30 mm above burner tip along radial direction. As increasing the height of the flame from burne. tip, primary particle size was increased to HAB(Height Above Burner tip)=20mm, and then decreased from HAB=27.5 mm to 30 mm. This results show the growth and oxidation processes for soot particles formed by combustion.

• 해양환경안전학회지
• /
• 제29권4호
• /
• pp.356-362
• /
• 2023

기후 변화에 따른 위험성은 전 세계적으로 오랜 기간 강조되고 있으며, 이를 극복하기 위한 노력은 해운분야에서도 국제해사 기구를 중심으로 이어지고 있다. 연소과정에서 발생한 매연을 제어하기 위하여 매연 생성 특성에 관한 연구는 필수적이다. 본 연구에서는 에틸렌 가스를 기반으로 한 대향류 확산화염에서 불활성 기체인 질소를 혼합하여 화염온도, 화염형태, 매연 생성 관련된 화학종의 상태변화를 확인하기 위해 광소멸법과 화학반응 수치해석을 수행하였다. 연구 결과. 질소의 혼합비율이 증가함에 따라 화염온도 감소와 매연체적분율 감소로 이루어졌다. 매연 입자가 분포하는 구간도 감소하였으며, 30% 이상 혼합비율이 높아지면 체적분율 감소율이 감소하였다. 매연 성장에 관여하는 화학종들의 몰분율도 감소하였다. HACA 반응 관련 화학종은 탄화수소 연료 비율에 따라 영향을 받으나, 홀수탄소 경로 관련 화학종은 탄화수소 연료 비율뿐만 아니라 화염온도 영향을 받는 것을 확인하였다.