• Mass Spectrometry Letters
• /
• v.13 no.4
• /
• pp.166-176
• /
• 2022

Banana peels are also widely used as bio-adsorbent in the removal of chemicals contaminants and heavy metals from water and soil. GC-MS plays an essential role in the phytochemical analysis and chemo taxonomic studies of medicinal plants containing biologically active components. Intrinsically, with the use of the flame ionization detector and the electron capture detector which have very high sensitivities, Gas chromatography can quantitatively determine materials present at very low concentrations and most important application is in pollution studies. In the present study banana peels were used as bio-adsorbent to remediate the heavy metal contaminated water taken from three different stations located around the industrial belts of Ranipet, Tamilnadu, India. The AAS analysis of the samples shows a decrement of chromium concentration of 98.93%, 96.16% and 96.5% in Station 1, 2 and 3 respectively which proves the efficiency of the powdered peels of Musa paradisiaca. The GC-MS analysis of the control and treated peels of Musa paradisiaca reveals the presence of phytochemicals like Acetic Acid, 1-Methylethyl Ester, DL-Glyceraldehyde Dimer, N-Hexadecanoic Acid, 3-Decyn-2-Ol, 26-Hydroxy, Cholesterol, Ergost-25-Ene-3,5,6,12-Tetrol, (3.Beta.,5.Alpha.,6.Beta.,12.Beta.)-, 1-Methylene-2b-Hydroxymethyl-3, and 3-Dimethyl-4b-(3-Methylbut-2-Enyl)-Cyclohexane in the control banana peels. The banana peels which were used for the treatment reveals the changes and alteration of the phytochemicals. It is concluded that the alteration in phytochemicals of the experimental banana peels were due to adsorption of chromium heavy metal from the sample.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.483-487
• /
• 2018

The objective of this study was to examine the natural origin of propionic acid in rice cakes by investigating the growth characteristics of the microflora and their production of propionic acid in the Joraengyi rice cake during storage period. The experiment was done in two stages within a period of three month: the rice cake fresh and contaminated with cocktail propionibacterium. The propionic acid production was analyzed according to the storage time and temperature by GC-FID (Gas chromatograph with flame ionization detector). During the storage of the fresh Joraengyi rice cake without alcohol at $30^{\circ}C$, about 95 mg/L of propionic acid was detected in 1st week, 330 mg/L in 4th week, 850 mg/L in 6th week, 970 mg/L in 8th week, and 1,040 mg/L in 12th week. During the storage of the Joraengyi rice cake which was contaminated with cocktail propionibacterium at $30^{\circ}C$, about 100 mg/L was detected from the rice cake with alcohol in the 1st week, 270 mg/L in 2nd week, about 470 mg/L in 4th week, and 660 mg/L in 8th week. This study demonstratesd the natural production of propionic acid during storage of the Joraengyi rice cake. To prevent the production, it is necessary to thoroughly manage hygiene and store it at refrigerated temperature or below $20^{\circ}C$.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.43-51
• /
• 1969

The purpose of this study was to determine protein amino acid contents of some Korean foods by gas-liquid chromatography, and to evaluate this technique as a procedure for the quantitative determination of amino acids in foods. The crude protein content of foods was also estimated from the nitrogen content. 1. Nitrogen content of each food sample was determined previously to adjust the amount of sample for GLC analysis 2. In the analysis of 17 known amino acids, a linear relationship was found between the weight of 13 amino acids of 17 amino acids, the internal standard as well as the injection volume of a mixture and the detector responses for the derivatives of the amino acids. No response for arginine, cystein, histidine, and tyrosine was observed. 3. The relative molar response (RMR) values for the 13 amino acids of standard solution relative to glutamic acid as '1.00' were obtained under normal operating conditions with a hydrogen flame ionization detector. 4. The recovery of amino acids from their mixtures with natural food materials was carried out. The recoveries were essentially quantitative except threonine and serine. An overall mean recovery of 11 amino acids was $101.4{\pm}8.4$ per cent before hydrolysis and $98.1{\pm}8.7$ per cent after hydrolysis of samples. 5. The comparative analysis of the acid hydrolysates of two food samples by gas-liquid and ion-exchange chromatographic analysis were carried out. In white-bait pemmican, only threonine and asparagine amounts by GLC analysis had similar values to those obtained by ion-exchange chromatography. The other seven amino acids gave higher values as measured by GLC than by ion-exchange. With the food sample, soybean, alanine, valine, asparagine, and glutamic acid were in good agreement in two analysis, while leucine, proline, threonine, phenylalanine, and lysine were found in slightly higher concentrations in the GLC analysis. 6. Grant variations of amino acid content were found among samples analyzed. The amino acid contents of each sample were compared with the values found in the literature.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.417-422
• /
• 2010

Low temperature diesel combustion was achieved via a combination of late injection timing ($8.5^{\circ}$ CA BTDC to $0.5^{\circ}$ CA BTDC) and heavy exhaust gas recirculation (37% to 48%) with ultra low sulfur Swedish diesel fuel in a 1.7L common rail direct injection diesel engine. When injection timing is retarded at a certain exhaust gas recirculation rate, the particulate matter and nitrogen oxides decease simultaneously, while the hydrocarbon and carbon monoxide increase. Hydrocarbon speciation by gas chromatography using a flame ionization detector reveals that the ratio of partially burned hydrocarbon, i.e., mainly alkenes increase as the injection timing is retarded and exhaust gas recirculation is increased. The two most abundant hydrocarbon species are ethene which is a representative species of partially burned hydrocarbons, and n-undecane, which is a representative species of unburned hydrocarbons. They may be used as surrogate hydrocarbon species for performing a bench flow reactor test for catalyst development.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.53-61
• /
• 2015

PURPOSES : The objective of this study is to evaluate the SDAR (solvent deasphaltene residue), which is obtained from the solvent deasphalting (SDA) process, as a pavement material. METHODS : The physical properties of the SDAR were evaluated based on its chemical composition, and asphalt mixtures with the SDAR were fabricated and used for the evaluation of mechanical properties. Firstly, the chemical composition of SARA (saturate, aromatic, resin and asphaltene) was analyzed using the TLC-FID (thin-layer chromatography-flame ionization detector). Moreover, the basic material properties of the asphalt binder with the SDAR were evaluated by the penetration test, softening point test, ductility test, and PG (performance grade) grade test. The rheological properties of the asphalt binder with the SDAR were evaluated by the dynamic shear modulus ($G^*$) obtained using the time-temperature superposition (TTS) principle. Secondly, the mechanical properties of the asphalt mixtures with the SDAR were evaluated. The compactibility was evaluated using the gyratory compacter. Moreover, the tensile strength ratio (TSR) was used for evaluating the moisture susceptibility of the asphalt mixtures (i.e., susceptibility to pothole damage). The dynamic modulus $E^*$, which is a fundamental property of the asphalt mixture, obtained at different temperatures and loading cycles, was used to evaluate the mechanical properties of the asphalt mixtures. RESULTS AND CONCLUSION : The SDAR shows stiffer and more brittle behavior than the conventional asphalt binder. As the application of the SDAR directly in the field may cause early failures, such as cracks on pavements, it should be applied with modifiers that can favorably modify the brittleness property of the SDAR. Therefore, if appropriate additives are applied on the SDAR, it can be used as a pavement material because of its low cost and strong resistance to rutting.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.3
• /
• pp.211-215
• /
• 2016

BACKGROUND: The commercial biopesticides containing Chenopodium ambrosioides L. extracts which have been registered as one of the ingredients of the commercial biopesticide by the organic agriculture materials, and have been widely used in Republic of Korea. However, the quantitative analysis method of the active substances for the commercial biopesticides containing C. ambrosioides L. extract has not been conducted.METHODS AND RESULTS: To analyze the quantitative analysis of ascaridole, carvacrol, and p-cymene as active substances of C. ambrosioides L. extract, hydrophilic lipophilic balance cartridge was used for solid phase extraction. The active substances were analyzed by the gas chromatography with flame ionization detector. The limit of quantitation values of ascaridole, carvacrol, and p-cymene were 10, 5, and 2 mg/L, and the recovery rates were 96.3, 84.0, and 82.5% in liquid products and 98.3, 99.1, and 97.3% in solid products, respectively. The total content of ascaridole, carvacrol, and p-cymene in the commercial biopesticides was ranged from 0.08 to 12.75%.CONCLUSION: From these results, this method was suitable for the quantitative analysis of the active substances of commercial biopesticides containing C. ambrosioides L. extract.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.4
• /
• pp.387-396
• /
• 2003

A field study was conducted during the summer time of 2002 to determine compositions of volatile organic compounds (VOCs) emitted from vehicles and to develop source emission profiles that is applied to CMB model to estimate the source contribution of certain area. Source emission profile is widely used for the estimation of source contribution by the chemical mass balance model and have to be developed applicable for the target area of estimation. This study was aimed to develop source emission profile and estimation of source contribution of VOCs after application of the chemical mass balance (CMB) receptor model. After considering the emission inventory and other research results for the VOCs in Seoul, Korea, the sources like vehicle emission (tunnel), gas station (gasoline, diesel), solvent usage (painting operation, dry cleaning, graphic art), and gas fuels were selected for the major VOCs sources. Furthermore, ambient air samples were simultaneously collected from 09:00 to 11:00 for four days at eight different official air quality monitoring sites as receptors in Seoul during summer of 2001. Source samples were collected by canisters, and then about seventy volatile organic compounds were analyzed by gas chromatography with flame ionization detector (GC/FID). Based on both the developed source profiles and the database of the receptors, CMB model was intensively applied to estimate mass contribution of VOCs sources. Examining the source profile from the vehicle, the portion of alkanes of VOCs was highest, and then the portion of aromatics such toluene, m/p-xylene were followed. In case of gas fuel. they have their own components; the content of butane, propane, ethane was higher than any other component according to the fuel usage. The average of the source apportionment on VOCs for 8 sites showed that the major sources were vehicle emission and gas fuels. The vehicle emission source was revealed as having the highest contribution with an average of 49.6%, and followed by solvent with 21.3%, gas fuel with 16.1%, gasoline with 13.1%.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.174-181
• /
• 2017

Bio-liquid is a liquid by-product of the hydrothermal carbonization (HTC) reaction, converting wet biomass into solid hydrochar, bio-liquid, and bio-gas. Since bio-liquid contains various compounds, it requires efficient sampling method to extract the target compounds from bio-liquid. In this research, fatty acid methyl ester (FAME) in bio-liquid was extracted based on hollow fiber supported liquid phase microextraction (HF-LPME) and determined by Gas Chromatography-Flame Ionization Detector (GC-FID) and Gas Chromatography/Mass Spectrometry (GC/MS). The well-known major components of biodiesel, including methyl myristate, palmitate, methyl palmitoleate, methyl stearate, methyl oleate, and methyl linoleate had been selected as standard materials for FAME analysis using HF-LPME. Physicochemical properties of bio-liquid was measured that the acidity was 3.30 (${\pm}0.01$) and the moisture content was 100.84 (${\pm}3.02$)%. The optimization of HF-LPME method had been investigated by varying the experimental parameters such as extraction solvent, extraction time, stirring speed, and the length of HF at the fixed concentration of NaCl salt. As a result, optimal conditions of HF-LPME for FAMEs were; n-octanol for extraction solvent, 30 min for extraction time, 1200 rpm for stirring speed, 20 mm for the HF length, and 0.5 w/v% for the concentration of NaCl. Validation of HF-LPME was performed with limit of detection (LOD), limit of quantitation (LOQ), dynamic range, reproducibility, and recovery. The results obtained from this study indicated that HF-LPME was suitable for the preconcentration method and the quantitative analysis to characterize FAMEs in bio-liquid generated from food waste via HTC reaction.

• Food Science of Animal Resources
• /
• v.33 no.5
• /
• pp.672-677
• /
• 2013

The aim of this study was to develop sample preparation method and evaluate the exact cholesterol content in egg and egg powder purchased from Korean markets, and to determine whether significant differences exist among various egg products, since a variety of products are available in Korean markets and there are no recent databases for cholesterol. To evaluate the cholesterol content in chicken egg sold in Korean local market, a simple method using non-heated saponification to determine cholesterol for emulsified foods was applied. The results of recovery for egg and egg powder were in a range of 92.4-105.0%, with a relative standard deviation between 1.1% and 2.8% by using gas chromatography-flame ionization detector. Therefore, the total cholesterol content in whole egg was estimated between 160.8 and 226.3 mg/egg (AV(average) $186.8{\pm}3.5$), which is similar or lower than previously reported levels. The value for cholesterol in egg powder was estimated between 2.94 and 3.49 mg/g (AV $3.23{\pm}0.15$). We suggested method that can be applicable to chicken egg and egg powder matrix as providing rapid and accurate determination of cholesterol in egg and egg powder. This information will be helpful for processed food producers for deciding food labels of cholesterol content.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.1
• /
• pp.9-18
• /
• 2010

In this study, Solid-phase micro-extraction (SPME) with Gas Chromatograph using Flame Ionization Detector (GC/FID) was studied as a possible alternative to liquid-liquid extraction for the analysis of Methyl tert-butyl ether (MTBE) and Tertiary-butyl ether (TBA) in water and an optimization condition of trace analysis of MTBE and TBA using the design of experiment (DOE) was described. The aim of our research was to apply experimental design methodology in the optimization condition of trace analysis of fuel oxygenated compounds in soil-phase microextraction with GC/FID. The reactions of SPME were mathematically described as a function of parameters of Temp ($X_1$), Volume ($X_2$), Time ($X_3$) and Salt ($X_4$) being modeled by the use of the partial factorial designs, which was used for fitting 2nd order response surface models and was alternative to central composite designs. The model predicted agreed with the experimentally observed result ($Y_1$(MTBE, $R^2$ = 0.96, $Y_2$ (TBA, $R^2$ = 0.98)). The estimated ridge of the expected maximum responses and optimal conditions for MTBE and TBA were 278.13 and (Temp ($X_1$) = $48.40^{\circ}C$, Volume ($X_2$) = 73.04 mL, Time ($X_3$) = 11.51 min and Salt ($X_4$) = 12,50 mg/L), and 127.89 and (Temp ($X_1$) = $52.12^{\circ}C$, Volume ($X_2$) = 88.88mL, Time ($X_3$) = 65.40 min and Salt ($X_4$) = 12,50 mg/L), respectively.