• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.340-342
• /
• 2003

본 연구의 목표는 난연화를 위한 기존 공법의 단점 보완과 환경 친화적인 난연제를 사용한 비 난연 XLPE 케이블의 난연화 방법과 최적의 난연 코팅액 배합에 있다. 전력용, 통신용 등과 같이 고난연성이 요구되는 경우 기존 컴파운드 방법으로는 난연제를 다량으로 첨가하여 사용하며, base polymer와의 혼합성, 기계적인 물성에도 영향을 끼쳐서는 안되는 등 여러 가지 요구 조건을 만족시켜야 하는 문제점을 가지고 있다. 각 난연 코팅액에 따른 코팅 표면을 고찰한 결과 모든 코팅의 표면은 깨끗하였으며, 코팅층의 두께는 약 10～20 ㎛로 일정하게 코팅이 되었다. Mg(OH)₂/Zinc Borate의 경우는 무게비(wt％)가 1 : 0.5, 1: 0.6에서 난연 효과를 보였으나. 1 : 0.7이상에서는 유연성이 떨어져 코팅층의 균일이 발생하여 연소 테스트시 난연 효과가 떨어지는 현상을 볼 수 있었다. Mg(OH)₂/AF100 S/Zinc Borate의 경우는 AF100 S의 첨가량이 증가할수록 탄화막 형성되어 난연성이 향상되었다.

• Journal of Adhesion and Interface
• /
• v.20 no.2
• /
• pp.61-65
• /
• 2019

In this study, phosphorus polyols, having a molecular weight of 880 to 1,560 g/mol, were synthesized by reacting phenylphosphonic dichloride (PPDC), allylphosphonic dichloride (APDC), and ethylene glycol (EG) in solvent, to enhance flame retardance of polyurethane. Phosphorus polyurethanes were polymerized using the synthesized phosphorus polyols, polycarbonate diol (PCD), and 4,4'-diphenylmethane diisocyanate (MDI) by a melt polymerization method. As increasing phosphorus contents of the phosphorus polyurethanes, we observed that the remaining char amount increased. This tendency was also confirmed in the following UL-94V test. We found that when the synthesized phosphorus polyols were applied, the resulting phosphorus polyurethanes show UL-94V0 grade at above 0.5 wt% phosphorus contents.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.4
• /
• pp.362-370
• /
• 2006

The purpose of this paper was to investigate the reforming characteristics and optimum operating condition of the plasmatron assisted $CH_4$ reforming reaction for the hydrogen-rich gas production. Also, in order to increase the hydrogen production and the methane conversion rate, parametric screening studies were conducted, in which there were the variations of the $CH_4$ flow ratio, $CO_2$ flow ratio, vapor flow ratio, mixing flow ratio and catalyst addition in reactor. High temperature plasma flame was generated by air and arc discharge. The air flow rate and input electric power were fixed 5.1 l/min and 6.4 kW, respectively. When the $CH_4$ flow ratio was 38.5%, the production of hydrogen was maximized and optimal methane conversion rate was 99.2%. Under these optimal conditions, the following synthesis gas concentrations were determined: $H_2$, 45.4%; CO, 6.9%; $CO_2$, 1.5%; and $C_2H_2$, 1.1%. The $H_2/CO$ ratio was 6.6, hydrogen yield was 78.8% and energy conversion rate was 63.6%.

• Analytical Science and Technology
• /
• v.33 no.2
• /
• pp.98-107
• /
• 2020

Methamphetamine (MA) is currently the most abused illicit drug in Korea. MA is produced by chemical synthesis, and the final target drug that is produced contains small amounts of the precursor chemicals, intermediates, and by-products. To identify and quantify these trace compounds in MA seizures, a practical and feasible approach for conducting chromatographic fingerprinting with a suite of traditional chemometric methods and recently introduced machine learning approaches was examined. This was achieved using gas chromatography (GC) coupled with a flame ionization detector (FID) and mass spectrometry (MS). Following appropriate examination of all the peaks in 71 samples, 166 impurities were selected as the characteristic components. Unsupervised (principal component analysis (PCA), hierarchical cluster analysis (HCA), and K-means clustering) and supervised (partial least squares-discriminant analysis (PLS-DA), orthogonal partial least squares-discriminant analysis (OPLS-DA), support vector machines (SVM), and deep neural network (DNN) with Keras) chemometric techniques were employed for classifying the 71 MA seizures. The results of the PCA, HCA, K-means clustering, PLS-DA, OPLS-DA, SVM, and DNN methods for quality evaluation were in good agreement. However, the tested MA seizures possessed distinct features, such as chirality, cutting agents, and boiling points. The study indicated that the established qualitative and semi-quantitative methods will be practical and useful analytical tools for characterizing trace compounds in illicit MA seizures. Moreover, they will provide a statistical basis for identifying the synthesis route, sources of supply, trafficking routes, and connections between seizures, which will support drug law enforcement agencies in their effort to eliminate organized MA crime.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.41-45
• /
• 2007

Tetramethylorthosilicate (TMOS) and silica nanopowder were synthesized from the waste silicon sludge containing 15% weight of silicon powder. TMOS, a precursor of silica nanopowder, was firstly prepared from the waste silicon sludge by catalytic chemical reaction. The maximum recovery of the TMOS was 100% after 5 hrs regardless of reaction temperature above $130^{\circ}C$. But the initial reaction rate became faster while the reaction temperature was higher than $150^{\circ}C$. As the methanol feedrate Increased from 0.8 ml/min to 1.4 ml/min, the yield of reaction was not varied after 3 hrs. Then, silica nanopowder was synthesized from the synthesized TMOS by flame spray pyrolysis. The morphology of as-prepared silica nanopowder was spherical and non-aggregated. The average particle diameters ranged from 9 nm to 30 nm and were in proportional to the precursor feed rate, and precursor concentration.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.487-492
• /
• 1998

Ultrafine particles of $SnO_2$ or $(Sn,Ti)O_2$ and thin films of $SnO_2$ were synthesized by introducing aqueous tin chloride solution into a high temperature argon inductively coupled plasma (ICP) generated under ambient pressure (the spray-ICP technique). As-deposited $SnO_2$ particles from each concentration of solution were all tetragonal $SnO_2$ crystallline phase and their mean size decreased in proportion to the increase of solution concentration. The mean size of $SnO_2$ particles was in the 10~40 nm range.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.3
• /
• pp.380-391
• /
• 1997

A numerical study has been done on the evolution of particle size distribution in particle laden high temperature jet flows undergoing convection, diffusion, thermophoresis and coagulation. The dynamic behavior of these particles have been modelled by approximating the particle size distribution by a lognormal function throughout the process and the moments of the particle size distribution have been used to solve the general dynamic equation. The size distributions of spherical particles in the radial and axial direction have been obtained including the effect of buoyancy. Of particular interests are the variations of geometric mean diameter, number concentration and polydispersity. Results show that buoyancy significantly alters the size distribution in both axial and radial direction. One dimensional analysis for non-spherical particles has also been done and the results have been compared with the existing experimental data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.218-222
• /
• 2003

본 연구의 목표는 난연화를 위한 기존 공법의 단점 보완과 환경 친화적인 난연제를 사용한 비 난연 XLPE 케이블의 난연화 방법과 최적의 난연 코팅액 배합에 있다. 전력용, 통신용 둥과 같이 고난연성이 요구되는 경우 기존 컴파운드 방법으로는 난연제를 다량으로 첨가하여 사용하며, base polymer와의 혼합성, 기계적인 물성에도 영향을 끼쳐서는 안 되는 등 여러 가지 요구 조건을 만족시켜야 하는 문제점을 가지고 있다. 각 난연 코팅액에 따른 코팅 표면을 고찰한 결과 모든 코팅의 표면은 깨끗하였으며, 코팅층의 두께는 약 10-20㎛로 일정하게 코팅이 되었다. TBBA/Sb₂O₃, TBBA/Zinc Borate의 무게비(wt%)가 1:0.7 이상부터 난연 효과를 보였다. 또한 Mg(OH)₂/Zinc Borate의 경우는 무게비(wt％)가 1:0.5, 1:0.6에서 난연효과를 보였으나, 1:0.7 이상에서는 난연 효과가 떨어지는 현상을 보였다. Mg(OH)₂/AF100 S/Zinc Borate의 경우는 AF100 S의 첨가량이 증가할수록 난연성이 향상되었다. 난연 코팅액의 열 분해 거동을 비교한 결과, Mg(OH)₂/Zinc Borate의 경우 초기 분해 온도가 유기계 난연제를 사용하였을 경우보다 늦어졌으며, 최종 잔류 탄화물 양도 많이 생성되었다. Mg(OH)₂/AF100 S/Zinc Borate의 경우 난연 효과를 상승을 위해 인계 난연제(AF100 S)를 첨가하였으나. 오히려 초기 분해온도가 빨라졌으며 잔류 탄화물의 양도 적게 나타났다. 그러나 연소 테스트 결과 가장 우수한 난연 효과를 보였다.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.115-127
• /
• 1999

The charged clusters or particles, which contain hundreds to thousands of atoms or even more, are suggested to form in the gas phase in the thin film processes such as CVD, thermal evaporation, laser ablation, and flame deposition. All of these processes are also used in the gas phase synthesis of the nanoparticles. Ion-induced or photo-induced nucleation is the main mechanism for the formation of these nanoclusters or nanoparticles inthe gas phase. Charged clusters can make a dense film because of its self-organizing characteristics while neutral ones make a porous skeletal structure because of its Brownian coagulation. The charged cluster model can successfully explain the unusual phenomenon of simultaneous deposition and etching taking place in diamond and silicon CVD processes. It also provides a new interpretation on the selective deposition on a conducting material in the CVDd process. The epitaxial sticking of the charged clusters on the growing surface is gettign difficult as the cluster size increases, resulting in the nanostructure such as cauliflowr or granular structures.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.1_2
• /
• pp.41-47
• /
• 1996

1, 2, 4-Trichlorobenzene (1, 2, 4-TCB) is used as a dye carrier, as an intermediate in the synthesis of herbicides, as a flame retardant, and for other purpose. After a single oral administration of 1, 2, 4-TCB (200 mg/kg, 400 mg/kg) in rats, toxic effects were studied by means of serum biochemical and heatological analysis, and liver calcium concentration. Administration of 1, 2, 4-TCB resulted in dose-dependent liver and kidney damage as estimated by increased serum alanine aminotransferase (ALT) activities, liver calcium concentration and blood urea nitrogen (BUN). Pretreatment with DL-buthionine sulfoximine (BSO, 2 mmol/kg, i.p. ) considerably decreased liver glutathione concentration, which was accompanied by markedly elevated serum ALT activites. It is well-known that toxicity of halogenated benzene such as bromobenzene, 1, 4-dichlorobenzene is increased by pretreatment of henobarbital (PB), and protected by pretreatment of cytochrome P450 inhibitor including metyrapone (MP). However, there was no obvious alterations in toxicity of 1, 2, 4-TCB by pretreatment of phenobarbital or metyrapone. In comparison with control group, treatment groups exhibited significant changes in some parameters of hematological analysis but all hematological values remined within normal ranges.