• Journal of Positioning, Navigation, and Timing
• /
• 제10권2호
• /
• pp.103-111
• /
• 2021

A series of experiments have been carried out by using National Geographic Information Institute(NGII)'s Continuously Operating Reference Station (CORS) data with various strategies to analyze the impact of multi-GNSS measurements on baseline processing. The results of baseline processing were compared in terms of ambiguity fixing rate, precision, and hypothesis tests were conducted to confirm the statistical difference. The combination of multi-GNSS measurements has helped to improve ambiguity fixing rate, especially under harsh positioning environments. Combination of GPS, Galileo, BeiDou could get better precision than that of GPS, GLONASS, Galileo, and adding QZSS made the baseline solution's vertical component more precisely. The hypothesis tests have statistically confirmed that the inclusion of the multi-GNSS in the baseline processing enables not only to reduce field observation time length but also to enhance the solution's precision. However, it is of interest to notice that results of the baseline solution are dependent upon the software used. Hence, comprehensive studies should be performed shortly to derive the best practice to select the appropriate software.

• 대한임상검사과학회지
• /
• 제47권4호
• /
• pp.243-250
• /
• 2015

10% 질산으로 탈회과정을 거친 골수생검조직에서는 각종 병리검사가 불가능하거나 재현성이 극히 제한적이었다. 각 실험군의 고정액으로는 산을 포함한 고정액과 산 비포함 고정액으로 나누어 사용하고, 탈회액으로는 산성 탈회액과 알카리성 탈회액(EDTA계열)으로 나누어 사용하였으며, 단계별 시간을 각각 다르게 하여 실험하였다. 산이 포함된 고정액 및 탈회액을 사용하였을 경우 모든 병리검사가 불가능할 정도로 검체가 불량하였다. 그러나 EDTA 계열의 탈회액으로 처리한 검체들은 EBV ISH에서는 비특이적 반응이 없어졌으며 FISH, DNA, RNA 검사에서도 병리진단이나 각종 연구에 적합한 수준의 결과를 얻었다. 골수생검조직의 고정방법과 탈회방법을 개선함으로써 ISH, FISH, DNA 검사뿐만 아니라 RNA 연구도 가능하게 하며 각종 검사법의 민감도, 특이도 및 재현성을 확보할 수 있게 되었다. 골수생검조직을 이용한 각종 검사법의 안정화로 환자의 진단, 예후 예측 및 치료 방침결정에 기여 할 수 있을 것으로 생각된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.286-291
• /
• 2001

This study is an introduction of ADS in which we have written out programs which can design three-dimensional machine parts and reduce the required time for design them comparing with other CADs. Among the machine parts, screws are commonly used in joining one part to another because of easy handing but welding and rivet are used to join permanently them even thought hard operation. Consequently, we have developed the screw fer permanent fixing using stairs type screw threads, which is considered as the main machine parts in joining. For that, we designed permanent fastened screws according to the different rotation angle using VisualLISP and transferred it to ANSYS, structural solution program, to find out allowance load, maximum equivalent stress and where it occur.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1003-1007
• /
• 1997

This study is na introduction of ADS in which we have written out programs which can design three-dimensional machine parts and reduce the required time for design them comparing with other CADs. Among the machine parts, screws are commonly used in joining one part to another because of easy handling but welding and rivet are used to join permanently them even thought hard operation. Consequently, w have developed the screw for permanent fixing using stairs type screw threads, which is considered as the main machine parts in joining. For that, we designed permanent fastened screws according to the different rotation angle using VisualLISP and transferred it to ANSYS, structural solution program, to find out allowance load, maximum equivalent stress and where it occur.

• 산업경영시스템학회지
• /
• 제22권51호
• /
• pp.129-138
• /
• 1999

The aim of this research is the development of an automated fixture planning system for prismatic parts using the case-based reasoning (CBR). CBR is the problem solving paradigm that uses the similarity between a new problem and old cases to solve the new problem. This research uses CBR for the fixture planning. A case is composed with the information of the part, the components of fixture and the method of fixing for the part. The basic procedure is the retrieval and adaptation for the case, and this research presents the method of retrieval that selects most similar case to the new situation. The retrieval-step is divided into an index matching and an aggregated matching. The adaptation is accomplished by the modification, which transforms the selected case to the solution of the situation of the input part by the specified CBR algorithm. The components of fixture and the method of fixing are determined for a new part by the procedure.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.93-98
• /
• 2017

트리메틸올멜라민에 의한 세리신 정착 거동을 고찰하기 위해 멜라민과 포름알데하이드를 몰 비 1:3으로 세리신정착액을 조성하여 실크 생사를 정착시켰고, 정련에 의해 세리신 정착 거동을 살펴보았다. 정착 과정에서 세리신의 정착이 일어나는 동시에 열수에 의해 세리신 I의 일부가 제거되었다. 정착 중의 감량과 정련에 의한 연감율은 멜라민과 포름알데하이드의 농도가 증가할수록 크게 감소했다. 0.011몰 멜라민과 0.033몰 포름알데하이드로 정착한 실크 생사는 불충분한 정착과 탄산나트륨에 의한 세리신의 알칼리 가수분해로 인해 많은 정련이 일어났다. 그러나 0.055몰 멜라민과 0.165몰 포름알데하이드로 정착한 실크 생사는 강한 세리신 정착으로 인해 3-8%의 매우 적은 연감율을 보였는데 이는 트리메틸올멜라민에 의해 세리신 I 분자 간에 많은 가교결합이 형성되었기 때문으로 사료된다. 또한 15% owf 유연제의 정착액으로 처리한 경우 정착에 의한 감량과 정련에 의한 연감율이 가장 작게 나타났는데 이는 유연제의 양이온이 세리신 중의 아스파르트산의 음이온과 이온결합을 형성하고 유연제의 소수부와 세리신의 소수성 영역 간에 반데르바알스력이 형성되어 세리신 I의 제거가 다소 억제된 것으로 사료된다.

• Management Science and Financial Engineering
• /
• 제13권2호
• /
• pp.1-27
• /
• 2007

This paper presents a fuzzy-goal programming(FGP) approach for Bi-Level Linear Multiple Objective Decision Making(BLL-MODM) problem in a large hierarchical decision making and planning organization. The proposed approach combines the attractive features of both fuzzy set theory and goal programming(GP) for MODM problem. The GP problem has been developed by fixing the weights and aspiration levels for generating pareto-optimal(satisfactory) solution at each level for BLL-MODM problem. The higher level decision maker(HLDM) provides the preferred values of decision vector under his control and bounds of his objective function to direct the lower level decision maker(LLDM) to search for his solution in the right direction. Illustrative numerical example is provided to demonstrate the proposed approach.

• 열처리공학회지
• /
• 제33권6호
• /
• pp.277-283
• /
• 2020

Cu-Co-Si based alloy has a strengthening mechanism for Co₂Si intermetallic compounds deposited on the copper matrix after aging treatment and the solution treatment has a key influence on the strength and electrical conductivity of the final products. In this paper, the Cu-1.6%Co-0.38%Si alloy was fixed at the time and the solution treatment temperature was set at a temperature in the range of 800 to 950℃, and the change in mechanical properties was observed by fixing the temperature at 950℃ and changing the time. The microstructure was observed using an electron microscope and an optical microscope, and the changes in hardness, electrical conductivity, and bending workability after aging treatment were investigated. When the solution treatment time is less than 20 seconds, the solution treatment is not sufficient and the formation of precipitates contributing to the increase in hardness decreases and the hardness decreases after the aging treatment, and in more than 50 seconds, the hardness decreases due to the coarsening of the grains and the bending workability got worse.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.35-45
• /
• 1994

The monobath method is accomplished using chemical solution, as processing in a developing and fixing at the same time, into which the exposed photographic material is placed. For this study, we appointed some values to be a standard that to coming as a results by normal processing with the developer D-76 for film Fuji Neopan SS 35mm, and which is compared with a monobath process. The experimental results show that processed condition is useful and applicable in monobath, for FX-6a and Keelan No.315.

• Coupled systems mechanics
• /
• 제9권1호
• /
• pp.77-89
• /
• 2020

This study is dedicated to the dynamic elasticity problem for a semi-strip. The semi-strip is loaded by the dynamic load at the center of its short edge. The conditions of fixing are given on the lateral sides of the semi-strip. The initial problem is reduced to one-dimensional problem with the help of Laplace's and Fourier's integral transforms. The one-dimensional boundary problem is formulated as the vector boundary problem in the transform's domain. Its solution is constructed as the superposition of the general solution for the homogeneous vector equation and the partial solution for the inhomogeneous vector equation. The matrix differential calculation is used for the deriving of the general solution. The partial solution is constructed with the help of Green's matrix-function, which is searched as the bilinear expansion. The case of steady-state oscillations is considered. The problem is reduced to the solving of the singular integral equation. The orthogonalization method is applied for the calculations. The stress state of the semi-strip is investigated for the different values of the frequency.