• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.232-237
• /
• 1997

Soybean plants inoculated Bradrhizobium japonicum MN 110 were grown in outdoor perlite pots with nitrogen free nutrient solution containing 1.0 mM-P(control) and 0.05 mM-P(stress) and harvested at 28, 35, 42 and 49 days after transplanting (DAT) to examine the effect of phosphorus deficiency on ureide concentration of and distribution to diffrent plant organ in nitrogen fixing soybean plant during the vegetative growth. Total dry mass of control plants increased 8.9 fold and that of phosphorus deficient plant increased 2.7 fold during the experimental period. Phosphorus deficiency reduced total phosphorus and nitrogen accumulation by 80%,40% respectively, at 28 DAT and 93%, 84%, respectively, at 49 DAT. Nitrogen concentration was reduced by phosphorus deficiency in all tissues with leaf and stem tissues affected to a greater degree than nodule and root tissues at every sampling date. Phosphorus deficiency significantly reduced soluble reduced-N and ureide-N concentration in leaf and stem but did not affect those in root. The proportion of soluble reduced-N in leaf was reduced from 60% to 50% but increased from 10% to 20% in the roots. The proportion of ureide-N in leaf of control plants was higher than that in phosphorus deficient plants, whereas, roots of phosphorus deficient plants contained a higher propotion of ureide-N than those of control plants. These indicated that phosphorus deficiency not only inhibit nitrogen fixation of nodules but also restrict the translocation of fixed nitrogen out of the root system into the xylem.(Received April 4, 1997; accepted May 2, 1997)

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.3
• /
• pp.177-183
• /
• 2004

The discharge of waste nutrient solution from greenhouse to natural ecosystem leads to the accumulation of excess nutrients that results in contamination or eutrophication. There is a need to recycle the waste nutrient solution in order to prevent the environmental hazards. The amount and kind of nutrients in waste nutrient solution might be enough to grow photosynthetic microorganisms. Hence in the present study, we examined the growth and mass cultivation of cyanobacteria in the waste nutrient solution with an objective of removing N and P and concomitantly, its mass cultivation. Four photosynthetic filamentous cyanobacteria (Anabaena HA101, HA701 and Nostoc HN601, HN701) isolated from composts and soils of the Chungnam province were used as culture strains. Among the isolates, Nostoc HN601 performed faster growth rate and higher N and P uptake in the BG-II ($NO_3{^-}$) medium when compared to those of other cyanobacterial strains. Finally, the selected isolate was tested under optimum conditions (airflow at the rate of $1L\;min^{-1}$. in 15 L reactor, initial pH 8) in waste nutrient solution from tomato hydroponic in green house condition. Results showed to remove 100% phosphate from the waste nutrient solution in the tomato hydroponics recorded over a period of 7 days. The growth rate of Nostoc HN601 was $16mg\;Chl-a\;L^{-1}$ in the waste nutrient solution from tomato hydroponics with optimum condition, whereas growth rate of Nostoc HN601 was only $9.8mg\;Chl-a\;L^{-1}$ in BG-11 media. Nitrogen fixing capacity of Nostoc HN601 was $20.9nmol\;C_2H_4\;mg^{-1}\;Chl-a\;h^{-1}$ in N-free BG-11. The total nitrogen and total phosphate concentration of Nostoc HN601 were 63.3 mg N gram dry weight $(GDW)^{-1}$ and $19.1mg\;P\;GDW^{-1}$ respectively. Collectively, cyanobacterial mass production using waste nutrient solution under green house condition might be suitable for recycling and cleaning of waste nutrient solution from hydroponic culture system. Biomass of cyanobacteria, cultivated in waste nutrient solution, could be used as biofertilizer.

• Clean Technology
• /
• v.26 no.4
• /
• pp.304-310
• /
• 2020

In order to apply a photocatalyst (TiO2) to various building materials, TiO2-mayenite was prepared in this study. The TiO2 was synthesized using the sol-gel method by fixing titanium isopropoxide (TTIP) and urea at a ratio of 1 : 1. Later, they were calcined in a temperature range of 400-700 ℃ to analyze the properties according to temperature. BET, TGA, and XRD were used to analyze the physical and chemical properties of TiO2. The nitrogen oxide removal test was confirmed by measuring the change in the concentration of NO for 1 h according to KS L ISO 22197-1. The prepared TiO2 samples exhibited an anatase crystal structure below 600 ℃, and TiO2 (urea)-400 showed the highest nitrogen oxide removal rate at 2.35 µmol h-1. TiO2-mayenite was prepared using two methods: spraying TiO2 dispersion solution (s/s) and sol-gel solution (g/s). Through BET and XRD analysis, it was found that 5-TiO2 (g/s) prepared by spraying a sol-gel solution has maintained its crystallinity even after heat treatment. Also, 5-TiO2 (g/s)-500 showed the highest removal rate of 0.55 µmol h-1 in the nitrogen oxide removal test. To prepare TiO2-mayenite, it was confirmed that mayenite should be blended with TiO2 in a sol-gel state to maintain the crystal structure and exhibit a high nitrogen oxide removal rate.

• Archives of design research
• /
• v.16 no.3
• /
• pp.361-370
• /
• 2003

We have understood Bauhaus being the origin of Modern Design and Formative Education to systematic semantic aspects to date. the facts that matter to us need to be understood on Bauhaus's education philosophy and the way of administration than Bauhaus's education contents. Bauhaus as designer has been informed to us how a design should be approached to viewpoints handling Objects, Methodology fixing up problems and Social viewpoints. But Bauhaus's design principle or Methodological solution is not setup by specific person but actualized by Masters and professors in charge of curricula. From these standpoints, inquiring into their characters and individual statements for design could be said to upright order. Especially Bauhaus has trio out lots of changes through inner discord and external challenge, taken great pains for the social function of design. So I would like to help right understanding on Bauhaus based on Bauhaus's statements.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1260-1268
• /
• 2013

A series of experiments were carried out with three native strains of microalgae to measure growth rates, biomass, and lipid productivities. Scenedesmus sp. IMMTCC-6 had better biomass growth rate and higher lipid production. The growth, lipid accumulation, and carbon dioxide ($CO_2$) consumption rate of Scenedesmus sp. IMMTCC-6 were tested under different NaOH concentrations in modified BBM. The algal strain showed the maximum specific growth rate (0.474/day), biomass productivity (110.9 mg $l^{-1}d^{-1}$), and $CO_2$ consumption rate (208.4 mg $l^{-1}d^{-1}$) with an NaOH concentration of 0.005 M on the $8^{th}$ day of cultivation. These values were 2.03-, 6.89-, and 6.88-fold more than the algal cultures grown in control conditions (having no NaOH and $CO_2$). The $CO_2$ fixing efficiency of the microalga with other alternative carbon sources like $Na_2CO_3$ and $NaHCO_3$ was also investigated and compared. The optimized experimental parameters at shake-flask scale were implemented for scaling up the process in a self-engineered photobioreactor. A significant increase in lipid accumulation (14.23% to 31.74%) by the algal strain from the logarithmic to stationary phases was obtained. The algal lipids were mainly composed of $C_{16}/C_{18}$ fatty acids, and are desirable for biodiesel production. The study suggests that microalga Scenedesmus sp. IMMTCC-6 is an efficient strain for biodiesel production and $CO_2$ biofixation using stripping solution of NaOH in a cyclic process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.460-468
• /
• 2009

Multiple-input multiple-output (MIMO) technology applied with orthogonal frequency division multiplexing (OFDM) is considered as the ultimate solution to increase channel capacity without any additional spectral resources. At the receiver side, the challenge resides in designing low complexity detection algorithms capable of separating independent streams sent simultaneously from different antennas. In this paper, we introduce an upper-lower bounded-complexity QRD-M algorithm (ULBC QRD-M). In the proposed algorithm we solve the problem of high extreme complexity of the conventional sphere decoding by fixing the upper bound complexity to that of the conventional QRD-M. On the other hand, ULBC QRD-M intelligently cancels all unnecessary hypotheses to achieve very low computational requirements. Analyses and simulation results show that the proposed algorithm achieves the performance of conventional QRD-M with only 26% of the required computations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.451-463
• /
• 2007

This paper describes issues of GPS network adjustment to determine coordinate sets of the $2^{nd}$ order national geodetic control points based on the Korean Geodetic Datum (KGD2002) which has been newly adopted in 2003, After outlining theoretical background of the GPS network processing, the adjustment procedure applied for this project is detailed. Throughout performing a series of minimally constrained adjustments, some outliers have been removed and magnitude of absolute and relative error for a stochastic modeling has been determined as 4mm+0.4ppm and 8mm+0.8ppm in the horizontal and vertical component, respectively. The over constrained adjustment by fixing the $1^{st}$ order control points was performed to derive final solution, indicating that the accuracy of the estimated coordinates was 2cm and 4cm in the horizontal and vertical component.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.2
• /
• pp.133-139
• /
• 1992

Removal of heavy metals by water hyacinth, Eichhornia crassipes Solms-Laub, was examined with two heavy metals Cd, Cu under laboratory conditions. Cd in culture solution was reducd to 0.116, 0.873, 2.015, 3.755 and 4,747 mg/L from 1, 2, 3, 4 and 5 mg/L for 24 hrs, after cultivating of water hyacinth respectively And, Cu was reduced to 0.086, 0.600, 2.174, 3.473, and 4.365 mg/L from 1, 2, 3, 4, and 5 mg/L for 24 hrs, after the cultivation, respectively. Cu was removed faster than Cd nd airating cultivation was effected higher than fixing cultivation. Removal effect of heavy metals by water hyacinth was higher in low a heavy metal cocentration than in high concentration

• Journal of the Korean Chemical Society
• /
• v.42 no.4
• /
• pp.416-421
• /
• 1998

In the reversed-phase ion-pair high performance liquid chromatographic (RPIP-HPLC) elution behavior of noble metal-thiacrown ether complexes, the effects of the concentration of ion-pairing reagent and kind of ligands were studied. It was found that the less the number of atoms in the ring of the thiacrown ether molecule was, the larger the selectivity was, and the elution mechanism of the complexes was explained due to the formation of ion-pair when the concentration of sodium dodecyl sulfate (SDS) in mobile phase was lower than 10 mM and due to the formation of micelle when the SDS concentration was higher than 10 mM. As a conclusion, separations of the noble metal-thiacrown ether complexes in an optimum separation condition were accomplished successfully and the method was proved to be an useful one for the separation and determination of Ag (Ⅰ) ion in a black-white photographic fixing solution.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.171-174
• /
• 2006

A large number of service providers in countries all over the world have established GNSS reference station networks in the last years and are using network software today to provide a correction stream to the user as a routine service. In current GNSS network processing, all the geometric related information such as ionospheric free carrier phase ambiguities from all stations and satellites, tropospheric effects, orbit errors, receiver and satellite clock errors are estimated in one centralized Kalman filter. Although this approach provides an optimal solution to the estimation problem, however, the processing time increases cubically with the number of reference stations in the network. Until now one single Personal Computer with Pentium 3.06 GHz CPU can only process data from a network consisting of no more than 50 stations in real time. In order to process data for larger networks in real time and to lower the computational load, a federated filter approach can be considered. The main benefit of this approach is that each local filter runs with reduced number of states and the computation time for the whole system increases only linearly with the number of local sensors, thus significantly reduces the computational load compared to the centralized filter approach. This paper presents the technical aspect and performance analysis of the federated filter approach. Test results show that for a network of 100 reference stations, with the centralized approach, the network processing including ionospheric modeling and network ambiguity fixing needs approximately 60 hours to process 24 hours network data in a 3.06 GHz computer, which means it is impossible to run this network in real time. With the federated filter approach, only less than 1 hour is needed, 66 times faster than the centralized filter approach. The availability and reliability of network processing remain at the same high level.