• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.261-268
• /
• 2008

STATEMENT OF PROBLEM: Detachment of the magnetic assembly from the denture base has been a problem in magnetic overdenture patients. PURPOSE: The objectives of this study were to compare the dislodging force by the fixing materials and the designs of the magnetic assembly, and to compare the effect between the fixing materials and the designs of the magnetic assembly. MATERIAL AND METHODS: Two fixing materials, Jet denture repair $acrylic^{(R)}$ and Super-$Bond^{(R)}$ C&$B^{(R)}$ and two types of magnetic assembly designed with or without wing were used. Each magnetic assembly was fixed in the chamber of the denture base resin block ($Lucitone^{(R)}$199) with each fixing material respectively. These specimens were thermocycled 2,000 cycles in the water held at $4^{\circ}C$ and $60^{\circ}C$ with a dwell time of 1 min each time. Each specimen was seated in a testing jig and then a push-out test was performed with a universal testing machine at a cross head speed of 0.5 mm/min to measure the maximum dislodging forces. RESULTS: Comparing the fixing materials, Super-Bond C&$B^{(R)}$ showed superior dislodging force than Jet denture repair $acrylic^{(R)}$. Comparing the design of the magnetic assemblies, the wing design magnetic assembly showed better dislodging force. Combination of the Super-Bond C&$B^{(R)}$ as a fixing material and wing design magnetic assembly revealed a greatest dislodging force. The kind of fixing material was more influential than the type of magnetic assembly. CONCLUSION: The dislodging force of Super-Bond C&$B^{(R)}$ was significantly higher than Jet denture repair $acrylic^{(R)}$. And the dislodging force of magnetic assembly which have wing design was significantly higher than magnetic assembly which have no wing design.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.134-138
• /
• 2007

Presents age is diversified in all genres by fast development of information and digital, and expression of fixing is not. Architecture and interior space design is showing new paradigm through dematerializing, ex-formal, nonlinear. Glass material is expressing by various technique in space and outer skin to introduction of digital media and a high-tech technology. Expressive characteristics and Techniques of this glass material are showing form of homogenized life in this age, simulated life. Therefore, this study does theoretical investigation through dematerializing of glass material, and analyzes works after 2000. Wish to understand stream of indoor design of present age after analyzes expression special quality and technique of glass material that reflect age and make a study of symbolic expression characteristic.

• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.295-307
• /
• 2019

In the process of the conservation treatment of the glass eyes of the stone standing Maitreya of Daejosa temple, Buyeo (Treasure No. 217), a blackish material, expected to be the adhesive for fixing the glass eyes, was collected and analyzed. Infrared spectroscopy and pyrolysis/gas chromatography/mass spectrometry (pyrolysis/GC/MS) were employed to identify the organic material in the sample. The IR analysis revealed the presence of materials such as apatite or bone black. The pyrogram of the sample was similar to that of Asian lacquer, among traditional adhesives. In particular, the pyrolysis/GC/MS analysis with online methylation detected 1,2-dimethoxy-3-pentadecylbenzene, methyl 7-(2,3- dimethoxyphenyl) heptanoate, and methyl 8-(2,3-dimethoxyphenyl)octanoate. These are known to be the pyrolysis products of catechol and its oxidation product, which indicated the presence of Asian lacquer in the sample. X-ray diffraction, X-ray fluorescence, and thermal gravimetry analysis showed that the sample contained ca. 60% inorganic substances, including apatite. Radiocarbon dating of the sample suggested that the blackish material was applied between the late 13^th and early 15^th century, revealing some discrepancy with the art-historical manufacturing time of the Maitreya. From the above analysis, it was concluded that Asian lacquer and bone ash were used to attach the glass eyes by forming a thick blackish lacquer layer.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.38-46
• /
• 2020

The purpose is to evaluate the structural characteristics of 750 mm diameter injection spiral blades under various operating conditions. A fiber-glass reinforced polypropylene material was employed to the injection blades, and mechanical tests on two kinds of glass-reinforced polypropylene were performed to evaluate the mechanical properties and to select a suitable candidate material. Also, three kinds of spiral blade geometries were studied to observe the influence of fixing rods between blades. For this, structural analyses were conducted to understand the role of fixing rods under a range of rotating speed. In addition, modal analysis was performed to confirm the resonance in the operating speed range. One-way fluid-structure interaction (FSI) analysis was carried out to know its mechanical integrity under dangerous wind speed conditions. Through this work, the structural characteristics of the proposed spiral blade geometries were studied under various operating conditions, and the requirements of mechanical properties of blades were determined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.14-18
• /
• 1996

From the experimental study of Wire-Cut EDM of die-material(SKD-11), machining characteristics such as machining rate, surface roughness and hardness have been observed and evaluated under the conditions varing pulse on time, pulse off time, peak voltage after fixing other conditions. It was found that various operating conditions have significant influences on machining rate, surface roughness. Hardness of workpiece was unaffected by operating conditions.

• Coupled systems mechanics
• /
• v.10 no.2
• /
• pp.185-198
• /
• 2021

An analytical model is consider to scrutinize axisymmetric wave propagation in multiferroic hollow cylinder with rotating and initial stressed forces, where a piezomagnetic (PM) material layer is bonded to a piezoelectric (PE) cylinder together by Linear elastic materials with voids. Both distinct material combos are taken into account. Three displacement potential functions are introduced to uncouple the equations of motion, electric and magnetic induction. The numerical calculations are carried out for the non-dimensional frequency by fixing wave number and thickness. The arrived outputs are plotted as the dispersion curves for different layers. The results obtained in this paper can offer significance to the application of PE/PM composite hollow cylinder via LEMV and CFRP layers for the acoustic wave and microwave technologies.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.35-45
• /
• 1994

The monobath method is accomplished using chemical solution, as processing in a developing and fixing at the same time, into which the exposed photographic material is placed. For this study, we appointed some values to be a standard that to coming as a results by normal processing with the developer D-76 for film Fuji Neopan SS 35mm, and which is compared with a monobath process. The experimental results show that processed condition is useful and applicable in monobath, for FX-6a and Keelan No.315.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.109-114
• /
• 1992

This paper describes an effect of operating condition on surface roughness in wire-cut FDM. The experimental values of surface roughness were measured by the test pieces under the condition of changing. On time, Off time, and Feed rate after fixing other conditions. The material of the test pieces is the alloy tool steel(STD 11) and was used after heat treatment. The results are as follows: 1. The surface roughness became rapidly worse according to the increase of On time and Feed rate. 2. The surface roughness became slowly better according to the increase of Off time.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.145-159
• /
• 2016

This study developed the learning criteria for Science, Technology, Engineering, Arts & Mathematics to establish the theoretical background of the education pursued by STEAM. The learning criteria was developed on a basis of 6 kinds of Technology Home Economics textbooks by 2009 Amended Curriculum, and the factors of STEAM were extracted according to related contents. From the results of this study, the unit 'Dress and Self-expression' assimilated T.E.A.M with learning related to clothing psychology, consumer behavior, fashion design, and Korean fashion. The unit 'eco-friendly clothing and fixing clothes' was found to assimilate S.T.E.A.M. with learning related to clothes science and dress structure. Accordingly we can understand this unit also consists of the S. T. E. A. M assimilation such as clothes science, fashion marketing, dress structure, dress aesthetics, design and so on. Both units 'dress and self-expression' and 'eco-friendly clothing and fixing clothes' were found to consist of suggesting situations, creative planning and emotional experience following the learning criteria of STEAM. Therefore, these units will be the basic material for developing STEAM programs centering upon 'Home Economics' among the curriculum.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.2
• /
• pp.11-15
• /
• 2005

The I$_{c}$ degradation behavior of Bi-2223 tapes bent at RT and 77K were investigated using the bending device invented by Goldacker. Test results on fixing the tape at RT and 17K showed no difference. At 17K and RT bending, the critical strain was 0.67 and 0.50$\%$, respectively, for the VAM-l tape. For the AMSC tape, it was 0.94 and 0.88$\%$, respectively. These results show that there is additional residual stress in the superconducting filaments to be bent at 17K which shifts the formation of cracks into smaller bending radii. This was proved by computational analysis based on the mixture rule of composites. For the VAM-l tape, the Ie degradation behavior using the Goldacker type device shifted to higher strain levels at about 0.5$\%$, as compared with the FRP sample holders which have a critical bending strain of about 0.24$\%$. Also, for the externally reinforced AMSC tape, Ie degradation using the Goldacker type device begins at a higher strain level, at 0.88$\%$ as compared with using FRP sample holders, at 0.74$\%$. The difference between both cases can be explained by the tensile' and thermal stresses that the tapes were subjected to during fixing (soldering) when the FRP sample holders were used.