• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.989-998
• /
• 1993

In a bursty user traffic mode, ALOHA random multiple access protocol achieves higher performance than any conventional fixed assignment technique. One of central problems in slotted ALOHA is synchronization. Because of the long propagation delay in satellite mobile communication, packet may be spilt over into adjacent slots and thus guard time may be included between packet intervals. In conventional ALOHA channels, simultaneous transmission by two or more users results in a collision : the unsuccessful packets have to be retransmitted according to some retransmission algorithm. However, in a radio environment, users are often at different distances from the receiver : therefore, their received signals have substantially different power levels. The packet arriving with the highest energy now has a good chance of being detected accurately. Similarly, in some spread-spectrum random access systems, the earliest arriving packet dominates later arriving packets and thus captures the channel. In this paper slotted ALOHA channel with non zero guard time and capture probability is studied. Using the Markovian model, the performance of slotted ALOHA with guard time and capture effects is derived and compared with that of the conventional ALOHA via numerical analysis.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.688-703
• /
• 2016

The 6th industrialization, which is the policy strategy to combine the 1st, 2nd, 3rd agro-food industries in order to create synergy effects, is one of the most important policy strategies for the Korean government. Local governments as well as the central government, especially the Ministry of Agriculture, Food and Rural Affairs, have introduced various specific programs for the 6th industrialization. Among them, the 6th industry antenna shops located in Cheonan and Daejeon which were introduced by the Chungcheongnam-do Provincial Government to offer a better market place for 6th industry producers. However, few studies have been conducted to evaluate the performance of 6th industry antenna shops. The purpose of this paper is to analyze consumers' satisfaction of 6th industry antenna shops through survey and econometric modeling and to present some implications of the better operation of the 6th industry antenna shops. The results of the studies in this paper present some of the following findings: first, the overall level of satisfaction towards 6th industry antenna shops is high but consumers still claim some problems. Second, products which are sold at 6th industry antenna shops have important problems, including high prices and deficient product variety. Third, if these problems were fixed, the operation of 6th industry antenna shops would be successful and contribute to the development of 6th industrialization in Korea.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.397-401
• /
• 2008

Knowledge of dynamic characteristics of structural elements often can make difference between success and failure in the design of structure due to resonance effect. In this paper an analytical model of a cantilever beam having midpoint load is considered for structural optimization. This involves creating the geometry which allows parametric study of all design variables. For that purpose optimization of cantilever beam is elaborated in order to find the optimum geometry which minimizes its volume eventually for minimum weight using ANSYS. But such geometry could be obtained by different combinations of width and height, so that it may have the same cross sectional area yet different dynamic behavior. So for optimum safe design, besides minimum volume it should have minimum vibration as well. In order to predict vibration different dynamic analyses are performed simultaneously to solve the eigenvalues problem assuming no damping initially through MATLAB simulations using state space form for modal analysis, which identifies the resonant frequencies and mode shapes belonging to the lowest three modes of vibration. And next by introducing damping effects tip displacement, bending stress and the vertical reaction force at the fixed end is evaluated under some dynamic load of varying frequency, and finally it is discussed how resonance can be avoided for particular design. Investigation of results clearly shows that only structural analysis is not enough to predict the optimum values of dimension for safe design. Potentially this technique will meet maintenance and cost goals of many organizations particularly for the application where dynamic loading is invertible and helps a lot ensuring that the proposed design will be safe for both static and dynamic conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2014

This paper deals with monitoring and analysis of temperature measurement data in concrete pylon of long span cable bridges. During the construction of Geoga Bridge in Busan-Geoje Fixed Link Project, temperature sensors were installed in several sections of hollow box type concrete pylon and temperatures along the depth of the four sides of the section have been recorded along with ambient temperature. Effects of temperature distribution on the pylon are analysed using actual measured data and results are compared with the design guideline. It was found that the temperature load model for concrete girder can be applied to box type concrete pylon. Structural analysis of the pylon due to variation of temperature distribution during the construction is performed using 3D modelling and FE program and the maximum displacements of east-west and north-south side were calculated as 0.056m and 0.121m, respectively.

• Journal of Korean Society for Quality Management
• /
• v.35 no.2
• /
• pp.37-44
• /
• 2007

Today, the statistical process control (SPC) in manufacture environment is an important role at the process by the productivity improvement of the manufacturing systems. The control chart in this statistical method is widely used as an important statistical tool to find the assignable cause that provoke the change of the process parameters such as the mean of interest or standard deviation. But the traditional SPC don't grasp the change of process according to the points fallen the near control limits because of monitoring the variance of process such as the fixed sampling interval and the sample size and handle the cost of the aspect of these sample point. The control chart can be divided into the statistical and economic design. Generally, the economic design considers the cost that maintains the quality level of process. But it is necessary to consider the cost of the process improvement by the learning effects. This study does the economic design in the VSI $\bar X$ control chart and added the concept of loss function of Taguchi in the cost model. Also, we preyed that the VSI $\bar X$ control chart is better than the FSI $\bar X$ in terms of the economic aspects and proposed the standard of the process improvement using the VSI $\bar X$ control chart.

• Korea-Australia Rheology Journal
• /
• v.19 no.4
• /
• pp.233-242
• /
• 2007

We performed a numerical investigation to find out the optimal choice of the spatial discretization in the distributed-Lagrangian-multiplier/fictitious-domain (DLM/FD) method for the solid/fluid interaction problem. The elastic solid bar attached on the bottom in a pressure-driven channel flow of a Newtonian fluid was selected as a model problem. Our formulation is based on the scheme of Yu (2005) for the interaction between flexible bodies and fluid. A fixed regular rectangular discretization was applied for the description of solid and fluid domain by using the fictitious domain concept. The hydrodynamic interaction between solid and fluid was treated implicitly by the distributed Lagrangian multiplier method. Considering a simplified problem of the Stokes flow and the linearized elasticity, two numerical factors were investigated to clarify their effects and to find the optimum condition: the distribution of Lagrangian multipliers and the solid/fluid interfacial condition. The robustness of this method was verified through the mesh convergence and a pseudo-time step test. We found that the fluid stress in a fictitious solid domain can be neglected and that the Lagrangian multipliers are better to be applied on the entire solid domain. These results will be used to extend our study to systems of elastic particle in the Stokes flow, and of particles in the viscoelastic fluid.

• Journal of Korean Elementary Science Education
• /
• v.34 no.3
• /
• pp.265-275
• /
• 2015

The purpose of this study was to develop forensic science program for the improvement of scientific creative problem-solving abilities in gifted elementary-school students. A program that consists of six sessions (18 hours) is developed in accordance with the CPS model, which has been already proven effective for the improvement of creative problem-solving abilities. This program was applied to sixth-grade 18 gifted students in an elementary school in Gyeonggi province. Examinations of scientific creative problem-solving abilities were performed before and after applying the program in order to determine its effect on gifted elementary students. A qualitative analysis of students' activity sheets, peer assessment and teacher's class journal was made in order to examine the process of improvement of students' scientific creative problem-solving abilities. The results of this study are as follows: First, forensic science program to enhance the scientific creative problem-solving abilities of gifted students was developed. Second, forensic science program is significantly effective in the improvement of scientific creative problem-solving abilities of gifted children of elementary school (p<.05). Third, in early stage of the class, a student, who showed the highest range of change in pre and post tests, revealed the trend of responding in a short answer type. In the late stage of the class, he revealed the capability of producing various creative ideas promptly. On the other hand, students belonging to the upper group of both pre and post test revealed the improvement of divergent thinking skills such as fluency, flexibility, and originality. Fourth, after class, the students responded that the forensic science program developed in this study intrigued the interests and curiosities, and helped them break away from fixed ideas.

• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.451-456
• /
• 2008

Total knee arthroplasty(TKA) using computer-assisted navigation has been increased in order to improve the accuracy of femoral and tibial components implantation. Recently, a few clinical studies have reported on the femoral stress fracture after TKA using computer-assisted navigation. The purpose of this study is to investigate the stress concentration around the femoral pin-hole for different pin-hole diameter, the modes of pin penetration by finite element analysis to understand the effects of pin-hole parameters on femoral stress fracture risk. A three-dimensional finite element model of a male femur was reconstructed from 1 mm thick computed tomography(CT) images. The bone was rigidly fixed to a 25 mm above the distal end and 1500 N of axial compressive force and 12 Nm of axial torsion were applied at the femoral head. For all cases, transcortical pin penetration mode showed the highest stress fracture risk and unicortical pin penetration mode showed the lowest stress concentration. Pin-hole diameter increased the stress concentration, but pin number did not increase the stress dramatically. The results of this study provided a biomechanical guideline for pin-hole fracture risk of the computer navigated TKA.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.573-580
• /
• 2017

Despite the recent remarkable advances in the computing power of mobile devices, the heat and battery problems still restrict their performances, particularly compared to PCs. Therefore, in the application of the ray-tracing technique for high-quality rendering, the consideration of a method that traces only the secondary rays while the effects of the primary rays are generated through rasterization-based OpenGL ES rendering is worthwhile. Given that most of the rendering time is for the secondary-ray processing in such a method, a new volume-grid technique for dynamic scenes that enhances the tracing performance of the secondary rays with a low coherence is proposed here. The proposed method attempts to model all of the possible spatial secondary rays in a fixed number of sampling rays, thereby alleviating the visitation problem regarding all of the cells along the ray in a uniform grid. Also, a hybrid rendering pipeline that speeds up the overall rendering performance by exploiting the mobile-device CPU and GPU is presented.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.627-631
• /
• 2006

The objective of this study was to evaluate the association of genetic differences in the bovine leptin gene and milk yield, reproduction, body condition score (BCS), and plasma glucose level in Iranian Holstein cows. In total, two hundred and thirty eight cows were used and genotyped for a restricted fragment length polymorphism at the leptin gene locus. Two genotypes, AA and AB, have been distinguished which have the frequencies of 0.89 and 0.11, respectively. The genotypes were distributed according to the Hardy - Weinberg equilibrium ($x^2$ = 0.733). During the first 12 wk of lactation, milk yield and composition, live weight, BCS and plasma glucose were measured in 50 cows. Data were analyzed based on a repeated measures ANOVA. During this period, milk yield and composition, live weight, BCS and plasma glucose level were similar among the genotypes. The first cumulative 60-d milk yield, 305-d milk yield, days to first breeding, days open and days from first breeding to conception using previous lactation records were also analyzed using Standard Least Square within mixed models. Fixed effects were year, season, parity and age at calving, and sire. For the reproductive traits the cumulative first 60-d milk yield was also added to the model. Animal was fitted as a random effect. A significant association was detected between the RFLP-AB genotype and 305-d milk yield (p<0.05). The first 60-d cumulative milk yield was similar for the two genotypes (p = 0.21) and tended to be higher in the heterozygous cows. The heterozygous genotypes at the above mentioned locus had a trend to better reproductive performance than the homozygous. The results demonstrate that the RFLP B-allele can yield a higher 305-d milk production with a trend to better reproductive performance.