• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.765-778
• /
• 2023

This study investigates the free vibration and buckling analyses of isotropic curved plate structures fixed at all ends. The Kirchhoff-Love Plate Theory (KLPT) and Finite Element Method (FEM) are employed to model the curved structure. In order to perform the finite element analysis, a four-node quadrilateral element with 5 degrees of freedom (DOF) at each node is utilized. Additionally, the drilling effect (θ_z) is considered as minimal to satisfy the DOF of the structure. Lagrange's equation of motion is used in order to obtain the first ten natural frequencies and the critical buckling values of the structure. The effects of various radii of curvatures and aspect ratio on the natural frequency and critical buckling load values for the single-bay and two-bay curved frames are investigated within this scope. A computer code based on finite element analysis is developed to perform free vibration and buckling analysis of curved plate frames. The natural frequency and critical buckling load values of the present study are compared with ANSYS R18.2 results. It has been concluded that the results of the present study are in good agreement with ANSYS results for different radii of curvatures and aspect ratio values of both single-bay and two-bay structures.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.6
• /
• pp.515-522
• /
• 2023

Objectives: The pandemic caused by coronavirus disease 2019 (COVID-19) has exerted an unprecedented impact on the health of populations worldwide. However, the adverse health consequences of the pandemic in terms of infection and mortality rates have varied across countries. In this study, we investigate whether COVID-19 mortality rates across a group of developed nations are associated with characteristics of their healthcare systems, beyond the differential policy responses in those countries. Methods: To achieve the study objective, we distinguished healthcare systems based on the extent of healthcare decommodification. Using available daily data from 2020, 2021, and 2022, we applied quantile regression with non-additive fixed effects to estimate mortality rates across quantiles. Our analysis began prior to vaccine development (in 2020) and continued after the vaccines were introduced (throughout 2021 and part of 2022). Results: The findings indicate that higher testing rates, coupled with more stringent containment and public health measures, had a significant negative impact on the death rate in both pre-vaccination and post-vaccination models. The data from the post-vaccination model demonstrate that higher vaccination rates were associated with significant decreases in fatalities. Additionally, our research indicates that countries with healthcare systems characterized by high and medium levels of decommodification experienced lower mortality rates than those with healthcare systems involving low decommodification. Conclusions: The results of this study indicate that stronger public health infrastructure and more inclusive social protections have mitigated the severity of the pandemic's adverse health impacts, more so than emergency containment measures and social restrictions.

• Asia pacific journal of information systems
• /
• v.33 no.4
• /
• pp.1016-1035
• /
• 2023

Corporate tax avoidance has been the subject of international debate since the Enron scandal and has raised awareness of the need for greater transparency in financial markets. Efforts have been made to strengthen financial reporting requirements and meet the needs of investors and other stakeholders, including digitalization of financial reporting through Extensible Business Reporting Language (XBRL). This study examines the impact of the mandatory adoption of XBRL on corporate tax avoidance. We tested our predictions using a panel dataset of Indonesian firms listed on the IDX stock exchange. Based on available information in the DATASTREAM database covering the 2013-2017 period, we used two proxies for tax avoidance i.e., GAAP effective tax rate and current effective tax rate. We estimated multiple regression model including industry and year fixed effects. The results show that XBRL implementation has reduced corporate tax avoidance. These findings suggest that improving corporate transparency through XBRL could play a deterrent tool to corporate tax avoidance. The results of this study should be useful to tax authorities and accounting standard setters supporting the benefits of digitalizing financial reporting and continuing to complete XBRL taxonomies around the world.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.425-442
• /
• 2004

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.5
• /
• pp.543-555
• /
• 2010

The objectives of this research were the estimation of genetic parameters and trends for weaning-to-first service interval (WSI), and litter traits in a commercial swine population composed of Landrace (L), Large White (T), LT, and TL animals in Chiang Mai, Northern Thailand. The dataset contained 4,399 records of WSI, number of piglets born alive (NBA), litter weight of live piglets at birth (LBW), number of piglets at weaning (NPW), and litter weight at weaning (LWW). Variance and covariance components were estimated with REML using 2-trait analyses. An animal model was used for WSI and a sire-dam model for litter traits. Fixed effects were farrowing year-season, breed group of sow, breed group of boar (litter traits), parity, heterosis (litter traits), sow age, and lactation length (NPW and LWW). Random effects were boar (litter traits), sow, permanent environment, and residual. Heritabilities for direct genetic effects were low for WSI (0.04${\pm}$0.02) and litter traits (0.05${\pm}$0.02 to 0.06${\pm}$0.02). Most heritabilities for maternal litter trait effects were 20% to 50% lower than their direct counterparts. Repeatability for WSI was similar to its heritability. Repeatabilities for litter traits ranged from 0.15${\pm}$0.02 to 0.18${\pm}$F0.02. Direct genetic, permanent environment, and phenotypic correlations between WSI and litter traits were near zero. Direct genetic correlations among litter traits ranged from 0.56${\pm}$0.20 to 0.95${\pm}$0.05, except for near zero estimates between NBA and LWW, and LBW and LWW. Maternal, permanent environment, and phenotypic correlations among litter traits had similar patterns of values to direct genetic correlations. Boar genetic trends were small and significant only for NBA (-0.015${\pm}$0.005 piglets/yr, p<0.004). Sow genetic trends were small, negative, and significant (-0.036${\pm}$0.013 d/yr, p<0.01 for WSI; -0.017${\pm}$0.005 piglets/yr, p<0.007, for NBA; -0.015${\pm}$0.005 kg/yr, p<0.01, for LBW; -0.019${\pm}$0.008 piglets/yr, p<0.02, for NPW; and -0.022${\pm}$0.006 kg/yr, p<0.003, for LWW). Permanent environmental correlations were small, negative, and significant only for WSI (-0.028${\pm}$0.011 d/yr, p<0.02). Environmental trends were positive and significant only for litter traits (p<0.01 to p<0.0003). Selection based on predicted genetic values rather than phenotypes could be advantageous in this population. A single trait analysis could be used for WSI and a multiple trait analysis could be implemented for litter traits.

• Steel and Composite Structures
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2020

This paper presents experimental and numerical studies on effects of local damages on the in-plane elastic-plastic buckling and strength of a fixed parabolic steel tubular arch under a vertical load distributed uniformly over its span, which have not been reported in the literature hitherto. The in-plane structural behaviour and strength of ten specimens with different local damages are investigated experimentally. A finite element (FE) model for damaged steel tubular arches is established and is validated by the test results. The FE model is then used to conduct parametric studies on effects of the damage location, depth and length on the strength of steel arches. The experimental results and FE parametric studies show that effects of damages at the arch end on the strength of the arch are more significant than those of damages at other locations of the arch, and that effects of the damage depth on the strength of arches are most significant among those of the damage length. It is also found that the failure modes of a damaged steel tubular arch are much related to its initial geometric imperfections. The experimental results and extensive FE results show that when the effective cross-section considering local damages is used in calculating the modified slenderness of arches, the column bucking curve b in GB50017 or Eurocode3 can be used for assessing the remaining in-plane strength of locally damaged parabolic steel tubular arches under uniform compression. Furthermore, a useful interaction equation for assessing the remaining in-plane strength of damaged steel tubular arches that are subjected to the combined bending and axial compression is also proposed based on the validated FE models. It is shown that the proposed interaction equation can provide lower bound assessments for the remaining strength of damaged arches under in-plane general loading.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.995-1002
• /
• 2013

The effect of conjugated linoleic acid (CLA) feeding on growth performance and fatty acid profiles in thigh meat of broiler chicken was investigated using meta-analysis with a total of 9 studies. Overall effects were calculated by standardized mean differences between treatment (CLA fed) and control using Hedges's adjusted g from fixed and random effect models. Meta-regression was conducted to evaluate the effect of CLA levels. Subgroups in the same study were designated according to used levels of CLA, CP levels or substituted oils in diets. The effects on final body weight, weight gain, feed intake and feed conversion ratio were investigated as growth parameters. Total saturated and unsaturated fatty acid concentrations and C16:0, C18:0, C18:2 and C18:3 concentrations in thigh meat of broiler chicken were used as fatty acid profile parameters. The overall effect of CLA feeding on final weight was negative and it was only significant in fixed effect model (p<0.01). Significantly lower weight gain, feed intake and higher feed conversion ratio compared to control were found (p<0.05). CLA feeding on the overall increased total saturated fatty acid concentration in broilers compared to the control diet (p<0.01). Total unsaturated fatty acid concentration was significantly decreased by CLA feeding (p<0.01). As for individual fatty acid profiles, C16:0, C18:0 and C18:3 were increased and C18:2 was significantly decreased by CLA feeding (p<0.01). In conclusion, CLA was proved not to be beneficial for improving growth performance, whereas it might be supposed that CLA is effective modulating n-6/n-3 fatty acids ratio in thigh meat. However, the economical compensation of the loss from suppressed growth performance and increased saturated fatty acids with the benefit from enhanced n-6/n-3 ratio should be investigated in further studies in order to propose an appropriate use of dietary CLA in the broiler industry.

• Journal of Animal Science and Technology
• /
• v.54 no.1
• /
• pp.9-14
• /
• 2012

The purpose of this study was to estimate heritabilities and genetic correlations for reproductive and productive traits and to apply their estimates to selection strategies in a swine population. Reproductive and productive traits considered in this study were number of born alive piglet (NBA), number of weaned piglet (NW), loin eye area (LEA), days to 90 kg (D90KG), back fat thickness (BF), and lean meat content (LEAN). Data were collected from 9,886 litters on 2,447 sows for reproductive traits and 10,181 gilts and boars for productive traits from Jan. 2000 to Dec. 2008 in a swine GGP farm. The statistical model to estimate genetic parameters for considering traits was a multiple traits animal model with including animal and maternal additive effects and litter effects on reproductive traits and animal additive effects on productive traits as random as well as some of fixed effects. For estimating (co) variance components of several random effects, restricted maximum likelihood methodology was used on this assumed model. The estimated heritabilities by animal additive effects and maternal effects were 0.07 and 0.02 for NBA and 0.03 and 0.02 for NW, respectively. Genetic correlation estimate for direct genetic effects between NBA and NW was 0.14. Heritability estimates for direct genetic effects were 0.19, 0.39, 0.36, and 0.43 for LEA, D90KG, BF and LEAN, respectively. The genetic correlation of LEA with LEAN was 0.35. Productive traits were antagonistically correlated with reproductive traits. From these results it is concluded that, if selection is done for strong positive effects of reproductive traits, then this would decline productive performance.

• Environmental and Resource Economics Review
• /
• v.15 no.2
• /
• pp.247-267
• /
• 2006

This paper formulates a monopolistic competition model by incorporating Leontief product function into Dixit and Stigliz model to analyze and compare the effects of two environmental policy instruments-fuel efficiency regulation and environmental tax-on a market which reflects characteristics of international vehicle market. As expected, both policy instruments raise equilibrium market prices. The effect of fuel efficiency regulation on firm output, the number of firms, and industry output, however, depends on three determinants-the increasing rate of the ratio of consumer expenditure to the income, the increasing rate of fixed cost, and the increasing rate of marginal cost. On the other hand, the imposition of the specific environmental tax reduces the firm output, but does not influence the number of firms. If these two instruments are assumed to lead to the same increasing rate of marginal costs, the environmental tax reduces the firm output as well as the industry output more than the fuel efficiency regulation. And it will induce more firms to exit the market than the fuel efficiency regulation if the increasing rate of the ratio of consumer expenditure to the income is larger than the increasing rate of fixed cost.

• Korean Journal of Labor Studies
• /
• v.19 no.1
• /
• pp.1-34
• /
• 2013

Labor share of income in Korea has fallen from 90% in 1996 to 79% in 2010. This paper explores the factors driving the movements in the labor share of income based on a panel dataset containing 19 years of data on 18 Korean manufacturing industries. The effects of technical progress, globalization and the bargaining power of labor and capital on the labor share of income are tested for the period of 1991-2009. The main empirical results are as follows. (1) Capital-aug menting technical prog ress measured by capital-labor ratio and R&D intensity has a negative effect on the labor share. (2) Market openness measured by the value of export and import as a ratio to value-added production is found to have a positive impact. (3) Globalization of production measured by inward-FDI and outward-FDI as a ratio to total domestic fixed capital is found to have a negative impact on the labor share. (4) Union density is found to have had a statistically significant effect in 1991-1998. This finding is consistent with the efficient bargain model in which firms and workers bargain over both wages and employment. But union density is insignificant in 2000-2009. This implies that since the financial crisis in 1997, the bargaining institution in Korea has been approaching the right-to-manage model in which firms and unions bargain over wages and then firms set employment unilaterally. (5) Variables for domestic financialization measured by dividend-income ratio and financial-fixed assets ratio have an insignificant effect on labor share.